1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

R7D-BP04H

★ ★ ★ ★ ★ Rated 0/5 Based on ratings.

Rate your purchase of the R7D-BP04H

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

The Omron R7D-BP04H servo drive is an AC servo drive that controls servo motors. Its constant output current is 2.5 Amps and the momentary maximum output current is 7.8 Amps. The main circuit input power supply voltage range for the drive is 200 to 240 Volts AC at 50/60 Hertz. The drive can be connected to single-phase and 3-phase AC power supplies. The incremental encoder that the drive can support can operate at 10,000 pulses per revolution. The R7D-BP04H servo drive supports a pulse-string input option. The weight of the AC drive is approximately 0.42 kilograms. The output power rating of the R7D-BP04H drive is 400 Watts. The recommended ambient temperature range for drive operation is 0 to 40 degrees Celsius. The recommended storage temperature for the drive is -20 to 65 degrees Celsius. For both operation and storage, the ambient humidity level must not exceed 85%, and there should be no condensation or corrosive gasses in the drive’s operating or storage environment. There are 2 separate cables connecting the R7D-BP04H drive to the motor. One of these is a power cable that provides power to the motor and the second one is a feedback cable that carries feedback from the motor to the drive. The R7D-BP04H servo drive is commonly used to control motors that operate at rated speeds of 3000 RPM. These motors can be standard servo motors or flat servo motors and they can be motors with or without brakes. The R7D-BP04H servo drive can also be connected to a compatible reactor and equipped with an EMC filter.

Technical Specifications for R7D-BP04H

Product typeServo drive
Output power400 Watts
Input power supply voltage (main circuit)200-240V AC
Output current2.5 Amps
PWM frequency6 kHz
Weight0.42 kg
Operating temperature0 to 40 degrees Celsius
Max humidity85% (non-condensing)
Encoder optionIncremental encoder
Voltage type3-phase or 1-phase

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.