1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

WP10030H-S1

★ ★ ★ ★ ★ Rated 0/5 Based on ratings.

Rate your purchase of the WP10030H-S1

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Refurbished

$550

1 In Stock

✓  2 Year PDF Supply Warranty

The Omron WP10030H-S1 is an industrial flat-style servo motor that does not include a brake. The motor’s speed rating is 3000 RPM. Its rated output is 100 Watts, and the rated torque is 0.318 Nm. The output current rating for the WP10030H-S1 motor is 0.91 Amps and the peak current rating is 2.8 Amps. The inertia rating of the motor rotor is 0.0000364 kg m2. The electrical time constant of the WP10030H-S1 motor is 1.2 milliseconds and the mechanical time constant is 0.53 milliseconds. The shipping weight of the motor is approximately 0.5 kilograms. An incremental encoder with 13-bit resolution is installed on the WP10030H-S1 motor. The supply voltage for the encoder is 5 Volts DC and the current draw is 120 milliamps. The recommended temperature range for WP10030H-S1 motor operation is 0 to 40 degrees Celsius. When unused, the motor must be stored in a location where the ambient temperature is between -20 and 60 degrees Celsius. The ambient humidity rating for the WP10030H-S1 motor for operation and storage is 20% to 80% with no condensation. The motor should also be kept away from corrosive gasses. The WP10030H-S1 motor has a protective enclosure that is not waterproof. The motor has a flange for mounting. When the motor is mounted, the througholes on the flange are aligned with the mounting surface and screws are used to secure the motor to the surface. The insulation grade of the WP10030H-S1 servo motor is B. During installation, the motor’s cables must not experience loads on their connectors.

Technical Specifications for WP10030H-S1

Speed3000 RPM
Output power100 Watts
Voltage class200 Volts
EncoderIncremental encoder
Mass0.5 kilograms
MountingFlange mounting
ShaftStraight
Shaft keyYes
BrakeNo
Operating temperature0 to 40 degrees Celsius

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.