1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Mitsubishi

Melservo

The MELSERVO HC Series is a Mitsubishi product platform for Digital Servo Motors. Its models are designed to be long-lasting, versatile, and fully optimized. It offers low inertia and small capacity models with an absolute position detector. It also has ultra-low inertia servo motors and middle inertia, middle capacity servo motors with absolute position detectors. MELSERVO HC servo motors have rated speeds (p/min) ranging from 1000 to 8192. Each servo motor might have different power requirements such as kW, current consumption, and other power specifications. However, most MELSERVO HC servo motors comply with EN directives, UL/C-UL standards, and others. In addition, MELSERVO HC servo motors are compact and fully optimized, making them an excellent cost practical choice for factory automation. These devices are designed to give users excellent flexibility when it comes to installation. The performance of these motors has improved over previous product lines from the manufacturers. In terms of installation, users should place these devices on noncombustible material. Because installing them directly on or near combustibles will result in a fire. It is also critical to install the equipment in a load-bearing location following the manufacturer's guidelines. Furthermore, environmental conditions should be considered before using and storing the servo motors. For example, the appropriate ambient temperature for the operation is 0 to 40 ℃ (non-freezing). Correspondingly, the MELSERVO-HC servo motors' ambient storage temperature ranges from -15 to 70 ° C. (non-freezing). Aside from that, the non-condensing humidity should be at least 80% RH for servo operation and 90% RH for storing these units.

Collage of images depicting Melservo units

MELSERVO

Mitsubishi Electric has designed and manufactured a wide range of automation products for industrial settings. MELSERVO, which are servo systems of Mitsubishi Electric, are used worldwide in areas spanning from Energy and Electric Systems to Electronic device design, Home Appliances to Information and Communication Systems, and industrial automation to manufacturing semiconductors. MELSERVO solutions have a list of products relating to each component of a drive system. A drive system needs a controller, an amplifier, a motor, programming software, sensors or actuators, and a network. Accordingly, Mitsubishi offers a wide range of products within each component section to fulfill a user’s needs in every aspect. All available products of each category are discussed sequentially.

MELSERVO Product Lines

1. Controllers

Controllers available with MELSERVO solutions are designed to serve a multitude of functions. No need to mention that these controllers are programmable. Functions could be as simple as positioning of the module to as complex as a multi-axis and high-speed system. Controllers in the MELSERVO product line include:

MELSEC iQ-R Series

Controllers from this series feature an advanced and high-speed bus. These controllers have a short cycle time, as well.

  • Simple Motion Modules
    • Sub-Series:
      • RD77GF (Combining the use of Ethernet and accurate synchronous control technology)
        • Product Numbers: RD77GF4 (Up to 4 Control Axes); RD77GF8 (Up to 8 Control Axes); RD77GF16 (Up to 16 Control Axes); RD77GF32 (Up to 32 Control Axes)
        • Operation Cycle: 0.5 milliseconds or more
        • Servo Amplifier: MR-J4-GF (-RJ)
        • Command Interface: IE Field Network with CC-Link
      • RD77MS (Combining versatility for different controls like position control, synchronous control, cam control, and speed-torque control)
        • Product Numbers: RD77MS2 (Up to 2 Control Axes); RD77MS4 (Up to 4 Control Axes); RD77MS8 (Up to 8 Control Axes); RD77MS16 (Up to 16 Control Axes)
        • Operation Cycle: 0.44 milliseconds or more
        • Servo Amplifier: MR-J4-B (-RJ) or MR-J4W- _ B; MR-JE-B
        • Command Interface: SSCNET III/H
  • Motion Controllers
    • Sub-Series:
      • RnMTCPU (Capable of performing control operation using programs. A task is performed independently from a PLC CPU)
        • Product Numbers: R16MTCPU (Up to 16 Control Axes); R32MTCPU (Up to 32 Control Axes); R64MTCPU (Up to 64 Control Axes)
        • Operation Cycle: 0.22 milliseconds or more
        • Servo Amplifier: MR-J4W_-B
        • Command Interface: SSCNET III/H
  • Positioning Modules
    • Sub-Series:
      • RD75P/RD75D (Works using output pulses issued at high speeds)
        • Product Numbers: RD75P2 (Up to 2 Control Axes); RD75P4 (Up to 4 Control Axes); RD75D2 (Up to 2 Control Axes); RD75D4 (Up to 4 Control Axes)
        • Operation Cycle: 0.3 milliseconds or more
        • Servo Amplifier: MR-J4-A (-RJ) and MR-JE-A or MR-JE-C
        • Command Interface: Pulse train through transistor output. Pulse train through the output of a differential driver.

MELSEC-Q Series

These controllers are designed to be highly versatile, and they meet the needs of any field and/or industry.

  • Simple Motion Modules
    • Sub-Series:
      • QD77GF (Combining use of Ethernet and accurate synchronous control technology like RD77GF)
        • Product Numbers: QD77GF4 (Up to 4 Control Axes); QD77GF8 (Up to 8 Control Axes); QD77GF16 (Up to 16 Control Axes)
        • Command Interface: IE Field Network with CC-Link
      • QD77MS (Simple to use controller)
        • Product Numbers: QD77MS2 (Up to 2 Control Axes); QD77MS4 (Up to 4 Control Axes); QD77MS16 (Up to 16 Control Axes)
        • Command Interface: SSCNET III/H
  • Motion Controllers
    • Sub-Series:
      • Q17nDSCPU (Module consists of a CPU that works with a PLC CPU to control motion)
        • Product Numbers: Q172DSCPU (16 Control Axes); Q173DSCPU (32 Control Axes)
        • Command Interface: SSCNET III/H
  • Standalone Motion Controller
    • Sub-Series:
      • Q10MSCPU (Consists of a power supply, PLC, and a motion controller, combining it all into one controller)
        • Product Numbers: Q170MSCPU equivalent to Q03UDCPU (16 Control Axes); Q170MSCPU-S1 Equivalent to Q06UDHCPU (16 Control Axes)
        • Command Interface: SSCNET III/H
  • Positioning Modules
    • Sub-Series:
      • QD75PN (For transistor output) or QD75DN (For differential driver output)
        • Product Numbers: QD75P1N or QD75D1N (1 Control Axis); QD75P2N or QD75D2N (2 Control Axes); QD75P4N or QD75D4N (4 Control Axes)
        • Command Interface: Pulse train through transistor output. Pulse train through the output of a differential driver.
      • QD70P or QD70D
        • Product Numbers: QD70P4 or QD70D4 (4 Control Axes); QD70P8 or QD70D8 (8 Control Axes)
        • Command Interface: Pulse train through transistor output. Pulse train through the output of a differential driver.

MELSEC iQ-F Series

These controllers are capable of working well in applications relating to network systems, as well as stand-alone uses. These controllers bring their users to the advanced level of the industry.

  • Simple Motion Modules
    • Sub-Series:
      • FX5-40SSC-S or FX5-80SSC-S (Advanced and compact controllers. Use sequence programs only to control speed and torque, perform synchronous and cam control)
        • Product Numbers: FX5-40SSC-S (Up to 4 Control Axes); FX5-80SSC-S (Up to 8 Control Axes)
        • Servo Amplifier: MR-J4-B (-RJ) or MR-J4W_-B, and MR-JE-B
        • Command Interface: SSCNET III/H
  • A PLC CPU module with a built-in positioning function
    • Sub-Series:
      • FX5U or FX5UC series (Perform positioning tasks via the use of table operation and positioning instructions)
        • Product Numbers: FX5U or FX5UC (Up to 4 Control Axes) - Used with I/O pulse modules performing at high speeds, up to 12 axes can be controlled
          • Servo Amplifier:
            • MR-J4-A(-RJ); MR-JE-C MR-JE-A
              • Command Interface: Train through transistor output
            • MR-J4-GF(-RJ) MR-JE-C
              • Field Basic CC-Link IE Network

MELSEC-L Series

L series controllers are ideal for applications where space is limited because they lack base. Moreover, these controllers are highly scalable.

  • Simple Motion Modules
    • Sub-Series:
      • LD77MS (Performs various tasks like cam control, synchronous control, and speed-torque control for press fit or tightening.
        • Product Numbers: LD77MS2 (2 Control Axes); LD77MS4 (4 Control Axes); LD77MS16 (16 Control Axes)
        • Command Interface: SSCNET III/H
  • SSCNET III/H Head Module
    • Sub-Series:
      • LJ72MS15 (Used to establish a connection between the I/O modules of the L series. Intelligent function module to network SSCNET III/H)
        • Product Numbers: LJ72MS15
        • Command Interface: SSCNET III/H
  • PLC CPU module with built-in function for positioning
    • Sub-Series:
      • LCPU
        • Product Numbers: LCPU (2 Control Axes)
        • Command Interface: Entails built-in I/O to output commanding pulses a to servo amplifier
  • Positioning Modules
    • Sub-Series:
      • LD75P (Pulse train output of transistor) or LD75D (For differential driver output)
        • Product Numbers: LD75P1 or LD75D1 (1 Control Axis); LD75P2 or LD75D2 (2 Control Axes); LD75P4 or LD75D4 (4 Control Axes)
        • Command Interface: Pulse train through transistor output. Pulse train through the output of a differential driver.

MELSEC-F Series

  • Main Unit with function for positioning built-in
    • Sub-Series:
      • FX3u/FX3uc (g=Gives pulse outputs, uses the main unit to perform position control)
        • Product Numbers: FX3u/FX3uc (3 Control Axes)
        • Command Interface: Pulse trains for position control
  • Positioning Module
    • Sub-Series:
      • FX3u - 1PG (Programmable controller of FX series, uses output block for pulse trains)
        • Product Numbers: FX3u - 1PG (1 Control Axis)
        • Command Interface: Pulse Train Output

C Controller or Personal Computer (PC) Embedded-type Servo System Controllers

Using a PC with a board controller or a C controller with an interfacing module allows the user to efficiently control a servo system.

  • Simple Motion Board

    • Sub-Series:
      • MR-EM340GF (Embed in a Personal computer. Uses user programs to control MR-J4-GF. Also supports PCI express)
        • Product Numbers: MR-EM340GF (120 Control Axes)
        • Command Interface: CC-Link IE Field

  • C Controller Interface Module

    • Sub-Series:
    • Q173SCCF (PCI express is used to connect it to a C Controller. User program is used to control the MR-J4-B)
      • Product Numbers: Q173SCCF (20 Control Axes)
      • Command Interface: SSCNET III/H

  • Position Board

    • Sub-Series:
      • MR - MC (Embedded in a PC. Uses a user program for controlling the MR-J4-B. Supports Peripheral Component Interconnect Express (PCI Express), Compact PCI, and PCI Bus)
        • Product Numbers: MR-MC2_0 (20 Control Axes); MR-MC2_1 (32 Control Axes); MR-MC341 (64 Control Axes)
        • Command Interface: SSCNET III/H

2. Servo Amplifiers

Servo solutions by Mitsubishi Electric serve applications demanding high speeds with good accuracy. These servos could be one-touch or multi-axis. Amplifiers in the MELSERVO system work well with motors that have linear or rotary motion.

MELSERVO-J4 Series

MELSERVO-J4 encompasses all-digital technology, is safe for the operating staff and the environment, and features a novel design to make it an energy-efficient product. Different products in this series support various interfaces for issuing commands.

Catalog number MR-J4-GF(-RJ) is compatible with the CC-Link IE Field Network and supports SSCNET III/H communications, depending upon the model. It works in a complete closed loop, and it is capable of performing interpolation control, as well as advanced synchronous control. It may be powered via a power supply rated at 100V, 300V, or 400V AC. Servos from the MELSERVO-J4 series mainly support DD motors, as well as rotary and linear servo motors.

MELSERVO-JE Series

Servo modules in the MELSERVO-JE series bring together features of easy use and basic performance with reliability. It provides its users with the option to adjust controller gains with just one touch. Some modules of this series feature an absolute position detection system, while others have a built-in function to know the position. The MELSERVO-JE series ensures high performance, and it is compatible with various global standards.

In this series...

  • MR-JE-C is compatible with Ethernet supporting CC-Link IE Field Basic
  • MR-JE-B is compatible with SSCNET III/H
  • MR-JE-A is a servo amplifier compatible with a general-purpose interface

3. Servo Motors

In the MELSERVO servo line, there are linear, rotary, and direct drive (DD) motors.

HG Series of Motors for MELSERVO-J4

  1. The HG-KR and HG-MR sub-series of motors have a small capacity and low inertia. Their capacity lies between 50W and 750W. The HG-KR sub-series has general-purpose machinery for an industrial setting, while the motors within the HG-MR sub-series are suitable for operations demanding a high throughput.
  2. HG-SR motors have a medium capacity in the range of 0.5kW to 220kW. Its inertia is also medium. It is suitable for use in material handling applications, robots, loaders, unloaders, and much more.
  3. The HG-JR sub-series has medium to large capacity (ranges between 0.5 and 220kW) servo motors. These motors go well in the food packaging industry, as well as printing machines, the press industry, and so on.
  4. The HG-AK sub-series has compact machinery with a small capacity in the range of 10W to 30W. it is suitable for systems needing small capacity motors like semi-conductor manufacturing systems, electronic component manufacturing, etc.
  5. The HG-RR sub-series has a medium capacity and very low inertia servo motors. These motors are good for applications requiring a high throughput, such as material handling, roll feeders, etc.
  6. The HG-UR sub-series motors have a flat structure and medium capacity. These motors are suitable for applications that have limited mounting space, like robots and conveyors.

HG Series of Motors for MELSERVO-JE

  1. The HG-KN sub-series has low inertia and small capacity servo motors. These are suitable for applications such as PCB drilling and embroidery or knitting machines.
  2. The HG-SN sub-series include medium capacity motors with medium inertia. These motors go well with applications in which the required load inertia is large.

LM Series of Motors for MELSERVO-J4

The LM series belong to linear servo motors which are used generally used for linear motion systems needing accuracy with high speed.

  1. The LM-H3 has a 3 m/s maximum speed. Its core is wound to save space. It is a highly rigid motor.
  2. The LM-F has a 2 m/s maximum speed. Its core is also compact. It has an in-built liquid cooling system.
  3. The LM-K2 has a maximum speed of 2 m/s. its core is designed to have counter force in magnetic attraction, which makes this machine less noisy, thus, extending the life of linear guides.
  4. The LM-U2 has a maximum speed of 2 m/s. it is a cordless machine. It might experience slight speed fluctuations when there is no cogging.

TM Series of Motors for MELSERVO-J4

Direct Drive motors are quite compact yet provide control with high accuracy.

  1. TM-RG2M and TM-RU2M are low-profile motors. They could be flange type or table type.
  2. The TM-RFM has high torque and high rigidity.

4. Networks

CC-Link Field Network

This is an open network with an Ethernet basis. This network works well for distributed control, safety control, I/O control, and motion control simultaneously. Its operation cycle is two (2) times faster than that of previous models. It can be set up easily.

SSCNET III/H

This network comes with amazing fast speed to the tune of 150Mbps full duplex. This network uses optical fiber technology, which makes it suitable for synchronization at high speeds. This communication system allows for a reduction in the cycle time of the machine. It also makes wiring easy and safe leading to a simple and quick start-up.

Selecting Models for Controllers and PLC CPUs

Based on the system size:

  • The MELSEC iQ-R series is for medium to large-scale control.
  • The MELSEC Q series is also for medium to large-scale control. This series introduced the idea of incorporating more than one CPU architecture.
  • The MELSEC L series is for medium to large-scale control. It is baseless and, therefore, suitable for applications with limited space.
  • The MELSEC iQ-F series is suitable for small-scale and stand-alone applications. This controller has amazingly high performance.
  • The MELSEC iQ-R series is also for stand-alone and small-scale applications.

Models can also be selected while considering the control method as a decisive factor.

Browse our selection of Melservo units

PDFSupply.com's online catalog offers one of the largest selections of preowned Melservo units in the world.

HF-KP43

The HF-KP43 servo motor is a low inertia and small capacity AC servo motor from Mitsubishi's HF-KP series. It operates with a rated power output of 0.4 kW, a rated torque value of 1.3 Nm, and a maximum torque value of 3.8 Nm. The HF-KP43 servo motor can also operate at 3000 RPM of rated speed and at 6000 RPM of maximum speed, and it features a standard straight shaft design and IP65 protection rating.

We have 7 units available with prices as low as $890.

HF-KP43B

The Mitsubishi HF-KP43B Rotary AC Servo Motor stands out with its exceptional power and emphasis on precise control and rapid response. It delivers robust performance with ratings of 400W capacity, 200V AC voltage, and 1.3 N-m torque. With an electromagnetic brake and 18-bit encoder, it ensures precise feedback and enhanced safety. Its compact size and low inertia making it suitable for diverse applications requiring speed and reliability.

We have 5 units available with prices as low as $1050.

HF-KP43BK

The HF-KP43BK by Mitsubishi Electric is a Servo Motor. It delivers a rated output of 0.4 kW and a maximum speed of 4500 rpm. Its 17-bit incremental encoder enables precise position control and feedback, enhancing overall system performance. The motor's compact and lightweight design makes it easy to integrate into space-limited setups, while its robust construction ensures reliable and long-lasting operation.

We have 2 units available with prices as low as $1397.

HF-KP43K

The HF-KP43K from Mitsubishi Electric's MELSERVO J3 series is an AC brushless rotary servo motor designed for motion control applications. Its low inertia design makes it ideal for small power capacity needs. This motor enables precise positioning, speed control, and torque output with efficient and responsive performance. It can run at a 200 Volts AC supply voltage, delivers 400 Watts of active power, and has a maximum speed of 6000 RPM.

We have 4 units available with prices as low as $850.

HF-KP73

The HF-KP73 Servo Motor by Mitsubishi delivers reliable performance with its maximum torque, three times the rated torque. It has a power capacity of 1.3 kVA and a voltage rating of 200V AC. This compact servo motor, combined with the MR-J3-70A/B/T Servo Amplifier, is designed for precise motion control applications. Its versatility is enhanced by the ability to mount it in any direction and a reduction gear efficiency ranging from 48 to 85%.

We have 5 units available with prices as low as $1190.

HF-KP73B

The HF-KP73B is an industrial servo motor. It was manufactured by Mitsubishi. The rated output of the HF-KP73B servo motor is 750 Watts. The motor’s rated and maximum speed values are 3000 RPM and 6000 RPM, respectively. The HF-KP73B motor weighs approximately 2.9 kilograms. An IP65-rated enclosure protects the HF-KP73B servo motor from dust and moisture, but this enclosure cannot provide an IP65 level of protection to the motor’s shaft-through portion or its connector.

We have 4 units available with prices as low as $1390.

HF-KP73BK

Mitsubishi Electric's HF-KP73BK Rotary AC Servo Motor is a low-inertia motor developed for accurate and dynamic motion control. It has a 1.3 kVA power supply capacity, a torque rating of 2.4 Nm (340 oz-in), and runs at a normal speed of 3000 rpm and a maximum speed of 6000 rpm. It is appropriate for severe industrial automation applications because of its keyway shaft, B insulation class, and IP65 protection grade.

We have 4 units available with prices as low as $1390.

HF-KP73K

The HF-KP73K from Mitsubishi Electric's MELSERVO J3 series is an AC brushless rotary Servo Motor. It is designed for precise control and reliable performance in industrial applications. It has a keyed shaft and a built-in absolute feedback encoder with an 18-bit resolution. In addition, this motor ensures accurate positioning and feedback. With a continuous rated current of 5.2A and power output of 750W (or 0.75kW), it is suitable for power-demanding and accurate applications.

We have 6 units available with prices as low as $1190.

HG-KR23

The HR-KR23 is a servo motor. Its manufacturer is Mitsubishi Electric. The rated capacity of the motor is 0.2 kilowatts. The HR-KR23 servo motor’s rated torque is 0.64 Nm, and the rated current is 1.3 Amps. The peak torque rating is 2.2 Nm, and the peak current rating is 4.6 Amps. The motor has a straight shaft without a seal. It also has a totally enclosed housing with an IP65 protection rating that allows for use in adverse conditions.

We have 5 units available with prices as low as $690.

HG-KR23B

The HG-KR23B servo motor is a compact and powerful MELSERVO-J4 series motor designed for motion control applications. Its rated capacity of 0.2 kW offers sufficient power output for various tasks. The motor's rated torque of 0.64 Nm and maximum torque of 2.2 Nm enables it to handle heavier loads. Operating at a rated speed of 3000 rpm and a maximum speed of 6000 rpm allows for precise positioning and swift control.

We have 3 units available with prices as low as $950.

HG-KR23BK

Mitsubishi's HG-KR23BK is a powerful 200-Watt AC servo motor from the HG product series. This device requires an AC power supply for its operation. This servo motor is used for heavy-duty servo applications. It has a brake key, operates at 3000 rpm rotational speed, and features a high 22-bit resolution. This servo motor delivers precise and dependable motion control, making it ideal for a broad range of industrial applications.

We have 4 units available with prices as low as $590.

HG-KR23K

The HG-KR23K is an AC Servo Motor manufactured by Mitsubishi. This motor meets motion control applications' requirements that demand accurate positioning and control. It has a rated capacity of 0.2 kW. The HG-KR23K servo motor's rated torque is 0.64 Nm, reflecting the rotational force it can consistently generate during regular operation. It also has a maximum torque of 2.2 Nm, highlighting its ability to deliver peak rotational force for short durations when necessary.

We have 2 units available with prices as low as $650.

HG-KR43

The Mitsubishi HG-KR43 Servo Motor is a powerful and versatile motor from the MELSERVO-J4 series. It delivers reliable performance in industrial applications with a rated capacity of 0.4 kW and a rated torque of 1.3 Nm. Its maximum torque of 4.5 Nm and rated speed of 3000 RPM ensure efficient and precise control. The motor's IP65 protection class, straight shaft type, and compact dimensions make it suitable for rugged environments and easy integration.

We have 5 units available with prices as low as $790.

HG-KR43B

Catalog number HG-KR43B is a Mitsubishi AC brushless rotary servo motor featuring a straight shaft, an integrated electromagnetic brake, and a 22-bit absolute feedback encoder. It supports a variety of communication protocols, has a 4-pin rectangular connector, is IP65 protected, and has a natural cooling mechanism. The HG-KR43B has several features that make it suitable for a wide range of applications. Its ambient operating temperature ranges from 0 to 40 degrees Celsius, and its storage temperature extends from -15 degrees Celsius to +70 degrees Celsius.

We have 6 units available with prices as low as $1090.

HG-KR43BK

The HG-KR43BK is an AC servo motor that was manufactured by Mitsubishi Electric. The motor is designed for 400 Watts of output power. It uses a 200 Volts AC power supply. The HG-KR43BK motor has a IP65 rated housing which is designed for flange mounting. An integrated encoder enables precise motor feedback. The motor’s brake can hold its shaft at 0 RPM when required. The performance specifications of the HG-KR43BK servo motor include a speed rating of 3000 RPM, and 1.3 Nm of rated torque.

We have 8 units available with prices as low as $1090.

HG-KR43K

The HG-KR43K servo motor is a servo motor manufactured by Mitsubishi Electric. It is part of the HG-KR series and is characterized by its low-inertia and small-capacity ratings and its compact size. With a rated power output of 0.4 KW, a rated torque value of 1.3 Nm, and a rated speed of 3000 rpm, it offers precise and efficient motion control for various applications. The shaft of the HG-KR43K servo motor includes a keyway.

We have 7 units available with prices as low as $790.

HG-KR73

The HG-KR73 servo motor is a low-inertia and small-capacity servo motor that was manufactured by Mitsubishi Electric in the HG-KR product line. With an output power rating of 750W, a rated speed of 3000 RPM, and a maximum speed rating of 6000 RPM, it offers high performance and versatility for industrial automation applications. The HG-KR73 servo motor supports a 22-bit encoder for speed and position detection functions, and it has an IP65 ingress protection rating.

We have 5 units available with prices as low as $590.

HG-KR73B

The HG-KR73B is a servo motor from Mitsubishi's HG Series, and it feautres low inertia and small capacity ratings. It has a rated power output of 0.75 kW, a rated torque value of 2.4 Nm, and a maximum torque value of 8.4 Nm. It operates with a rated speed of 3000 rpm and a maximum speed of 6000 rpm. It has an absolute/incremental encoder for precise speed and position detection, a totally-enclosed structure with an IP65 rating, and an electromagnetic brake.

We have 6 units available with prices as low as $1390.

HG-KR73BK

The Mitsubishi HG-KR73BK is a high-performance AC Servo Motor from the HG series, delivering 750 watts of power. With a speed of 3000 RPM and a voltage of 200 volts AC, it offers efficient and precise motion control. This servo motor is equipped with high-resolution encoders and is designed to work seamlessly with Mitsubishi servo amplifiers like the MR-J4 series. Additionally, it features an integrated brake and key, enhancing its versatility for a wide range of applications.

We have 2 units available with prices as low as $1390.

HG-KR73K

The HG-KR73K AC servo motor from Mitsubishi belongs to the MELSERVO-J4 series. It is designed with a rated capacity of 0.75 kW and a rated torque of 2.4 Nm. With a compact and robust build, the HG-KR73K motor supports a maximum torque rating of 8.4 N-m and operates at a maximum speed of 6000 rpm. The HG-KR73K servo motor's key features include an IP65 protection rating, a keyway type of shaft, and compatibility with both absolute and incremental encoders.

We have 4 units available with prices as low as $990.

HG-SR102

Model Number HG-SR102 is a servomotor that was developed specifically for the purpose of providing accurate motion control in industrial settings. This motor, which is manufactured by Mitsubishi Electric, provides dependable performance and is quite versatile. Its rated capacity of 1 kilowatt (kW) makes it capable of delivering an adequate amount of power to run a variety of applications. The HG-SR102 servo motor supports a torque rating of 4.8 (Nm).

We have 4 units available with prices as low as $1390.

HG-SR102B

The Mitsubishi HG-SR102B is a servo motor from the MELSERVO-J4 series designed for precise motion control. Its rated capacity of 1 kilowatt (kW) provides sufficient power to drive various industrial applications. The HG-SR102B servo motor is specifically designed for applications that require accurate and efficient control over a wide range of motion. Whether used in robotics, CNC machinery, or other motion control systems, this servo motor delivers reliable, high-performance operation.

We have 2 units available with prices as low as $1690.

HG-SR102BK

The Mitsubishi Electric HG-SR102BK servo motor is an AC brushless rotary servo motor from the company's MELSERVO J4 series, and it's built for high-precision motion control. Absolute feedback encoder (22 bits) and electromagnetic brake are both integrated for improved safety and pinpoint positioning accuracy. Its small 130x130mm flange installation and strong 1000W output make it ideal for a wide range of industrial uses. Its rated torque is 4.8Nm.

We have 2 units available with prices as low as $1250.

HG-SR102K

The Mitsubishi HG-SR102K is a servo motor designed for use in industrial automation applications and systems. It is part of the 200V voltage class and it uses a single-phase power supply. It operates with medium inertia levels. With advanced technology and precision engineering, the HG-SR102K servo motor supports reliable performance and high levels of efficiency. It also includes a protective enclosure with an IP67 ingress protection rating.

We have 3 units available with prices as low as $1125.

HG-SR52K

The HG-SR52K is an AC brushless rotary servo motor with a keyed shaft and a built-in 22-bit absolute feedback encoder; it has a rated output of 500 watts / 0.5 kilowatts, a rated current of 2.9 amps, a supply voltage of 200 VAC, a nominal torque of 2.4Nm (Newton-meter), maximum axial load of 490 N (Newton), radial load of 980 N, and a rotational speed of 2000 rev/min. This motor has two (02) MS-type connectors encased in an IP67-rated casing for tough conditions.

We have 2 units available with prices as low as $890.
Previous 1 2 Next

Displaying 25 of 33 results.

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.