1-919-535-3180
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-919-535-3180

Mon-Fri 8AM-5PM EST

[email protected]

HG-KR23

★ ★ ★ ★ ★ Rated 3.5/5 Based on 6 ratings.

Rate your purchase of the HG-KR23
Image of HG-KR23

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

New

$690

4 In Stock

✓  2 Year PDF Supply Warranty

*Need a Specific Revision?

The Mitsubishi HR-KR23 is a servo motor that is part of the 200 Volts AC voltage class. Its nominal operating speed is 3000 RPM and its maximum operating speed is 6000 RPM. The nominal and maximum torque ratings of the motor are 0.64 Nm and 2.2 Nm, respectively. The power output capacity of the HR-KR23 motor is 200 Watts. Other motor features include a straight shaft, an absolute/incremental encoder, and an IP65-rated housing. The power rate at the continuous rated torque is 18.3 kilowatts per second. The nominal and maximum current ratings of the HR-KR23 servo motor are 1.3 Amps and 4.6 Amps, respectively. The recommended load to motor inertia ratio is 26 times or less. There is no holding brake, oil seal, or thermistor on the motor. The housing is designed for natural cooling. The temperature range for operation is 0 to 40 degrees Celsius. Mechanical specifications of the HR-KR23 servo motor include 0.91 kilograms of weight and dimensions of 60 x 77.1 x 76.6 millimeters. Mitsubishi recommends using 600 Volts heat-resistant polyvinyl chloride (PVC) insulated wire with a 0.75 mm2 (AWG 18) cross-section. The reduction ratios and actual reduction ratios of the geared servo motor when used with general industrial machines are 1/5 and 19/96. At a 1/5 reduction ratio, the permissible radial load is 330 N and the permissible thrust load is 350 N. At a 1/12 reduction ratio, the permissible radial load is 710 N and the permissible thrust load is 720 N. At a 1/20 reduction ratio, the permissible radial load is 780 N and the permissible thrust load is 780 N.

Technical Specifications for HG-KR23

Rated capacity200 Watts
IP ratingIP65
CoolingNatural convection
ShaftStraight
Rated torque0.64 Nm
Maximum torque2.2 Nm
Rated speed3000 RPM
Maximum speed6000 RPM
Rated current1.3 Amps
Maximum current4.6 Amps

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.