1-919-535-3180
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-919-535-3180

Mon-Fri 8AM-5PM EST

[email protected]

HF-SP102

★ ★ ★ ★ ★ Rated 0/5 Based on ratings.

Rate your purchase of the HF-SP102

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

New

$1490

1 In Stock

✓  2 Year PDF Supply Warranty

*Need a Specific Revision?

The HF-SP102 is a servo motor that was designed by Mitsubishi Electric. It requires 3-phase input and operates at 200 to 230 Volts AC. It supports 1 kilowatt of rated output. The IP67-rated housing of the HF-SP102 servo motor protects it from dust and moisture. The HF-SP102 servo motor’s normal speed rating is 2000 RPM and its maximum speed rating is 3000 RPM. The HF-SP102 servo motor is a medium-capacity and medium-inertia servo motor. The rated torque of the HF-SP102 servo motor is 4.77 Nm when it runs continuously. The maximum motor torque rating is 14.3 Nm. The power rate at the continuous rated torque is 19.2 kilowatts per second. The recommended ratio of load inertia moment to servo motor shaft inertia moment for the motor is 15 times the motor’s highest inertia moment rating. The HF-SP102 servo motor’s rated current is 5.3 Amps and its maximum current is 15.9 Amps. The HF-SP102 servo motor’s ambient temperature range for normal operation is 0 to 40 degrees Celsius in non-freezing conditions. The ambient temperature range for motor storage is -15 to 70 degrees Celsius in non-freezing conditions. The HF-SP102 servo motor can be used at altitudes of up to 1000 meters above mean sea level. The approximate mass of the motor is 6.5 kilograms. The HF-SP102 servo motor supports an 18-bit encoder device for position and speed detection. It is also compatible with a Mitsubishi Electric servo amplifier. The servo amplifier controls the HF-SP102 servo motor with amplified signals.

Technical Specifications for HF-SP102

Rated output1 kilowatt
Input voltage200 to 230 Volts AC
Enclosure protection ratingIP67
ShaftStandard
Mass6.5 kilograms
Speed rating2000 RPM
Max speed3000 RPM
Electromagnetic brakeNo
Oil sealNo
Rated torque4.77 Nm

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.