1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

A1SD75P2-S3

★ ★ ★ ★ ★ Rated 0/5 Based on ratings.

Rate your purchase of the A1SD75P2-S3

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Refurbished

$490

2 In Stock

✓  2 Year PDF Supply Warranty

The A1SD75P2-S3 is a 2-axis positioning module from Mitsubishi Electric. It connects to a servo driver and controls the position of a motor. Its internal current consumption rating is 0.7 Amps or less at 5 Volts DC for both differential drive and open collector connections to a servo driver. The internal flash memory on the A1SD75P2-S3 module can be written to 100,000 times. The A1SD75P2-S3 module occupies 32 input/output points. The approximate weight of the A1SD75P2-S3 positioning module is 0.35 kilograms. The height of the module is 130 millimeters, its depth is 94 millimeters, and its width is 35 millimeters. The A1SD75P2-S3 module mounts vertically. With a differential drive connection, the A1SD75P2-S3 module supports 10 meters of connection distance between system servos. With an open collector connection, the A1SD75P2-S3 module supports 2 meters of connection distance between system servos. The maximum output pulse rating of the A1SD75P2-S3 module when it is connected to a differential drive is 400 kpps. The maximum output pulse rating of the module when it is connected to an open collector is 200 kpps. Depending on the application, Mitsubishi recommends AWG 24 or AWG 28 wire size for connections made to the module. A mode switch, one RS-422 interface, and 2 axis interfaces are located on the front panel of the A1SD75P2-S3 module. The RS-422 interface is used to connect peripheral devices. The 36-pin axis interfaces are used to make axis connections. Installers must securely insert the latches at the bottom of the A1SD75P2-S3 positioning module into the mounting holes on the base unit in order to install the module securely.

Technical Specifications for A1SD75P2-S3

Product typePositioning control module
Current consumption0.7 Amps at 5V DC
Weight0.35 kg
Dimensions130 x 94 x 35 millimeters
Axes2
Occupied I/O points32
Mounting orientationVertical
RS-422 interfaceSupported
WireAWG 24/AWG 28
Flash ROM write count100,000 times maximum

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.