GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

Mon-Fri 8AM-5PM EST

HE693THM666-Manual

Image of HE693THM666

SKU 2171104  UPC 0750354656582

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

The HE693THM666 allows thermocouple temperature sensors to be connected to the PLC directly without the use of external signal processing such as transducers, transmitters, etc. All analog and digital processing of the thermocouple signal is performed on the module. These backplane-isolated (or bus-isolated) modules report temperature values to the PLC I/O table in increments of 0.5°C, 0.5°F, 0.1°C, or 0.1°F respectively. The module features six thermocouple channels whose temperature values are reported to 6 %AI input registers. Each channel can be individually configured for a specific type of sensor wire. There are 6 %I alarm bits and one setpoint alarm for each channel. Alarm setpoints are configured for each channel using 6 %AQ registers. An available feature on the isolated thermocouples is the use of external AD592 cold junction compensation. This allows cold junction compensation to be accomplished in a remote isothermal terminal strip with a standard copper wire run from the remote terminal strip to the module.

Technical Specifications


Power Consumption 200mA @ 5VDC
Number of channels 6
Backplane Isolation ±1500 VAC to PLC backplane
Channel Isolation ±250V AC channel-to-channel
A/D Conversion Time 5ms
Common Channel Points NONE
Operating Temperature 0 to 60°C (32 to 140°F)
Operating Mode Self-Scan
I/O Points Required 6%AI, 6%AQ, 16%I
Input Impedance 1000M ohms @ < 100mV
Maximum Sustained Differential O/L ±35V
Common Mode Rejection >100dB
A/D Conversion Type 18-bit integrating
Scan Rate 40 channels per second
Open Thermocouple Response Programmable Upscale or Downscale
Relative Humidity 5% to 95% non-condensing
Resolution 0.5°C, 0.5°F, 0.1°C, 0.1°F
6 channel thermocouple input module for Series 90-30

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.