GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

Mon-Fri 8AM-5PM EST

HE693ADC415-Battery

Image of HE693ADC415

SKU 2173306  UPC 0416706838692

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Horner APG Isolated Analog Current Input Modules has four analog input channels with 14-bits of resolution. The isolation levels for this unit are channel-to-channel and channel-to-ground. This module converts the current input signals to digital values which are placed directly into the %AI table of the PLC CPU. Each of the four channels of the module may be configured for an input range of 4-20mA or +/-20mA. Each of the four channels of the module has a programmable setpoint (the level of which is set in the PLC program via four %AQ output registers). When the analog input value reaches or exceeds the setpoint, a corresponding digital input %I is energized. The first four %Is represent the four input channel setpoint alarms respectively. 

Technical Specifications


Steady-State Power Consumption ADC415: .4W /80 mA @ 5V 2.16W /90 mA @ 24V, ADC 420: .7W /140 mA at 5V 1.2W /50 mA @ 24V
Surge Current at Power-Up ADC415: 120mA @ 5V 150mA @ 24V, ADC420: 200mA @ 5V 100mA @ 24V
Number of Channels 4
Input Range 4-20mA, +/-20mA
I/O Required 4 %AI, 4 %AQ, 16 %I
A/D Type, Resolution Integrating, 18 bits
Useable Resolution 13 bits plus sign
Module Update Rate 45 channels/S
Input Impedance 100 ohms
Digital Filtering 1-128 samples / update
Analog Filtering 1KHz, 3 pole Bessel
Maximum Error .05% full scale
Input Impedance 1 Megohm
Channel to Channel (ADC410) 1500VAC (RMS), +/- 2000VDC
Common Mode Range (ADC410) 1500VAC (RMS), +/- 2000VDC
Channel to Channel (ADC405) 500VAC (RMS), +/-700VDC
Common Mode Range (ADC405) 500VAC (RMS), +/-700VDC
Common Mode Rejection >100dB
Relative Humidity 5% to 95%, non-condensing
Operating Temperature 0 to 60°C (32 to 140°F)

 

4ch., 4-20mA/0-20mA Analog Input, 700Vac Isolation, 14-bit resolution

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.