GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

Mon-Fri 8AM-5PM EST

HE693ADC405-Datasheet

Image of HE693ADC405

SKU 2176410  UPC 0317105840883

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description 

The HE693ADC405 has four analog input channels which include 14-bits of resolution. There are two models available, the HE693ADC410 which has 1500VAC(RMS) isolation, and the HE693ADC405 which has 500VAC (RMS) isolation. The isolation levels are channel-to-channel and channel-to-ground. These modules convert voltage signals to digital values (-32,000 tp +32,000) which can be found directly in the %AI table of the PLC CPU. Each individual channel (there are four channels) include a programmable setpoint. The level of which is set in the PLC program via four %AQ output registers. When the analog input value reaches or goes beyond the setpoint, a corresponding digital input %I is energized. The first four %Is represent the four input channel setpoint alarms, respectively.

Technical Specifications


 

 

Steady-State Power Consumption

ADC405: .4W / 80mA @ 5V,

2.16W / 90mA @ 24V

ADC410: .7W / 140mA @

5V, 1.2W / 50mA @ 24V

 

 

Surge Current at Power-Up

ADC405: 120mA @ 5V

150mA @ 24V

ADC410: 200mA @ 5V

100mA @ 24V

Number of Channels

4

I/O Required

4 %AI, 4 %AQ, 16 %I

Input Range +/- 10V

A/D Type, Resolution

Integrating, 18 bits

Useable Resolution 13 bits plus sign
Module Update Rate 45 channels/S

Digital Filtering

1-128 samples / update

Analog Filtering 1KHz, 3 pole Bessel
Maximum Error .05% full scale

Input Impedance

1 Megohm

Maximum Over-Voltage

Maximum Over-Voltage

Channel to Channel (ADC410)

1500VAC (RMS), +/- 2000VDC

Common Mode Range (ADC410) 1500VAC (RMS), +/- 2000VDC
Channel to Channel (ADC405) 500VAC (RMS), +/-700VDC
Common Mode Range (ADC405) 500VAC (RMS), +/-700VDC
Common Mode Rejection >100dB
Relative Humidity 5% to 95%, non-condensing
Operating Temperature 0 to 60C
4ch., +/-10Vdc Analog Input Module, 700Vac Isolation, 14-bit resolutio n

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.