GE / IP FANUC Series 90/30 In Stock
IC200SET001
SKU 2170003 UPC 0799705798489
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC200SET001 IC200SET001-AAIC200SET001-BBIC200SET001-BCIC200SET001-CCIC200SET001-DCIC200SET001-ECIC200SET001AIC200SET001BIC200SET001CIC200SET001DIC200SET001EIC200SET001FIC200SET001GIC200SET001HIC200SET001IIC200SET001JIC200SET001KIC200SET001LIC200SET001-LTIC200SET001MIC200SET001NIC200SET001OIC200SET001PIC200SET001QIC200SET001RIC200SET001SIC200SET001TIC200SET001UIC200SET001VIC200SET001WIC200SET001XIC200SET001YIC200SET001Z
Common misspellings:
- 1C200SET001
- IC2o0SET001
- IC20oSET001
- IC200SETo01
- IC200SET0o1
- IC200SET00l
- IC200SET001
Technical Specifications for IC200SET001
| Manufacturer | GE Fanuc |
|---|---|
| Series | Versamax |
| Part Number | IC200SET001 |
| Product Type | Ethernet to Serial Network Module |
| Ethernet Port | 10/100 Mbits Port Supporting RJ45 Connections |
| Serial Port | 1 RS-232 Port, 1 RS-485 Port (supports up to 16 devices) |
| Communications Configurations | Ethernet SRTP to SNP, Modbus TCP to Modbus Slave |
| Power Voltage | 12/24V DC |
| Dimensions | 36 x 90 x 60 mm |
| Mounting | 35 mm DIN Rail, Panel |
Product Description
Produced by GE Intelligent Platforms, the IC200SET001 is a serial to Ethernet network adapter module from the VersaMax series of PLC components. This module is intended to provide an interface between serial and Ethernet devices. With this product, serial devices can be connected to an Ethernet network using the TCP/IP protocol suite. Example devices that can be connected include programmable logic controllers (PLC), computer network controllers (CNC), display units, terminals, and various other instruments.
The Ethernet port for this device is a standard RJ-45 and supports 10 megabits per second (10BaseT). This module supports the following serial ports: RS-232, RS-485, and RS-422. This device is configurable via Windows NT, Windows 95, or Windows 98 operating systems, and the programming software can be either VersaPro 2.0 or Proficy Machine Edition Logic Developer.
A 10Mhz V.40 central processing unit is used with this product, along with 128 kilobytes of RAM and 128 kilobytes of EPROM. The power source voltage for this module, which is not embedded into the device, can vary between 9 and 30 volts of direct current; however, a 24-volt power supply from the VersaMax 90-30 series can also be used. Note: The power supply’s operational capacity should never be exceeded. The maximum power consumption for the IC200SET001 is measured at 3 watts.
The dimensions for the IC200SET001 are as follows: The height is 3.54 inches (90mm), the width is 2.36 inches (60mm), and the depth is 1.42 inches (36mm). Overall weight is about 0.33 pounds (150g).
The GE Fanuc IC200SET001 network adapter module provides an interface between the serial and Ethernet devices. When this module is being used, the serial devices link to the Ethernet network through the TCP/IP protocol. The operators can connect devices like the terminals, programmable logic controllers (PLCs), computer network controllers (CNCs), and display units to this module. The IC200SET001 network adapter module has a power consumption rating of 3 Watts, with a power voltage range of 9 to 30 Volts DC. Additionally, it can be run with power supply rated at 24 Volts that is from Series 90-30. The operational power supply capacity of this unit should not be exceeded. It can be used with a CPU that has a 10 MHZ V.40 processor, a RAM capacity of 128 KB, and EPROM capacity of 128 KB. The approximate dimensions of this module are 36 x 90 x 60 millimeters.
Technical Information
The IC200SET001
The IC200SET001
Troubleshooting IC200SET001
Troubleshooting information is available on IC200SET001's website page; it also includes a datasheet user-manual and a wiring diagram.
Price and Availability for IC200SET001
Price for IC200SET001 is available by calling 1-800-360-6802 or by filling out our "fast quote". PDF Supply has over 30 years of experience with PLCs and has experience with the GE Fanuc Versamax Series dating back to 1995. IC200SET001 comes with a minimum 1 year PDF Supply warranty. Returns are accepted for most unopened items. It does require pre-approval and RMA.
Repair your IC200SET001
PDF Supply can repair your IC200SET001 in 3-5 business days. And PDF Supply stands by all of its repairs with a 2 year customer satisfaction warranty.
Do you have questions or comments? We would love to hear from you!
1-800-360-6802 or [email protected]
Common related search terms: DatasheetEmerson, Manual, PDF, PLC, Price, Repair, Specification, User-Manual, Wiring,
