GE / IP FANUC Series 90/30 In Stock
SKU 2176358 UPC 09364892425810
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC200NDD101 IC200NDD101-DGIC200NDD101AIC200NDD101BIC200NDD101CIC200NDD101DIC200NDD101EIC200NDD101FIC200NDD101GIC200NDD101HIC200NDD101IIC200NDD101JIC200NDD101KIC200NDD101LIC200NDD101-LTIC200NDD101MIC200NDD101NIC200NDD101OIC200NDD101PIC200NDD101QIC200NDD101RIC200NDD101SIC200NDD101TIC200NDD101UIC200NDD101VIC200NDD101WIC200NDD101XIC200NDD101YIC200NDD101Z
The IC200NDD101 Nano PLC is designed by GE for the VersaMax series. This VersaMax Nano PLC has six inputs that are 24VDC and four transistor outputs. Operations for the IC200NDD101 PLC requires +24VDC nominal input power.
Devices such as lamps and valves use the four transistor circuits. For protection of the outputs, external fusing should be used, and fast fuses are suggested. The outputs can be arranged as regular outputs or outputs that are regulated by high speed counters. If outputs are controlled by high speed counters, they can also be used as Pulse Train and/or Pulse Width Modulation outputs. All of the outputs are switching positive voltage due to isolation between field and logic.
All the outputs have one common ground and one common supply (VC). The outputs of the IC200NDD101 have the capability to drive high inrush currents and guard against negative voltage impulse, which makes it possible to switch lamps and inductive loads. The counters have a10kHz maximum counter frequency and an input voltage of 15V when on and 5V off. There are up to three HSC/PT and/or PWM outputs with load voltage of 12/24V.
The IC200NDD101 has a DC power range of 19.2VDC to 30.0VDC and hold-up of 10mS at 19. 2Vdc.The inrush current is 1 amp maximum at 30Vdc with an inrush time of 10mS for 1 Amp. Each of the six DC inputs has a rated input voltage of 24VDC with input voltage range of 0 to 30VDC.
Common related search terms: DatasheetEmerson, Manual, PDF, PLC, Price, Repair, Specification, User-Manual, Wiring,
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.