GE / IP FANUC Series 90/30 In Stock
SKU 2170439 UPC 0290766697198
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC200CHS014 IC200CHS014AIC200CHS014BIC200CHS014CIC200CHS014DIC200CHS014EIC200CHS014FIC200CHS014GIC200CHS014HIC200CHS014IIC200CHS014JIC200CHS014KIC200CHS014LIC200CHS014-LTIC200CHS014MIC200CHS014NIC200CHS014OIC200CHS014PIC200CHS014QIC200CHS014RIC200CHS014SIC200CHS014TIC200CHS014UIC200CHS014VIC200CHS014WIC200CHS014XIC200CHS014YIC200CHS014Z
IC200CHS014 is an I/O Interposing Box-Style Thermocouple Cold Junction Compensation manufactured by GE Fanuc for its Versamax series. The IC200CHS014 acts as an interface and comes with a connector used to attach a cable from the connector-style I/O carrier and 36 box-style terminals. The IC200CHS014 offers local cold junction compensation for thermocouple input measurements.
The IC200CHS014 has a clear protective hinged door that covers the wiring terminals. Each I/O module in this unit is provided with a board that can be folded and inserted in this door.
There are two ways of mounting IC200CHS014. It can be mounted on the same DIN rail as the Connector-Style I/O Carrier or mounted on a separate DIN rail. Either way requires maximum resistance to mechanical vibration and shock; therefore the unit must also be panel mounted. The DIN rail should be installed on a panel using screws spaced approximately 6 inches (5.24 cm) apart.
It is advisable to install DIN-rail clamps on both ends of the station to help lock the IC200CHS014 into the correct position. The recommended clamp for this unit is catalogued as IC200ACC313. The DIN rail used in this case must be electrically grounded to provide EMC protection.
Common related search terms: DatasheetEmerson, Manual, PDF, PLC, Price, Repair, Specification, User-Manual, Wiring,
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.