GE / IP FANUC Series 90/30 In Stock
IC200ALG620
SKU 2176055 UPC 07942199618
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC200ALG620 IC200ALG620-AAIC200ALG620-CBIC200ALG620-DCIC200ALG620-ECIC200ALG620-FDIC200ALG620-FEIC200ALG620-GDIC200ALG620-GEIC200ALG620-HFIC200ALG620-JFIC200ALG620AIC200ALG620BIC200ALG620CIC200ALG620DIC200ALG620EIC200ALG620FIC200ALG620GIC200ALG620HIC200ALG620IIC200ALG620JIC200ALG620KIC200ALG620LIC200ALG620-LTIC200ALG620MIC200ALG620NIC200ALG620OIC200ALG620PIC200ALG620QIC200ALG620RIC200ALG620SIC200ALG620TIC200ALG620UIC200ALG620VIC200ALG620WIC200ALG620XIC200ALG620YIC200ALG620Z
Common misspellings:
- 1C200ALG620
- IC2o0ALG620
- IC20oALG620
- IC200A1G620
- IC200ALG62o
- IC200ALG620
Product Description
IC200ALG620 is a VersaMax Analog Input RTD Module that accepts input signals from up to 4 RTD with 16 bits of resolution. The IC200ALG620 is unique in that it requires no external power supply as the excitation current for the RTD is provided by the module when configured to the RTD type. The RTD Analog Input Module allows inputs from four independent three or four wire RTDs. These can be platinum, nickel/iron, nickel, or even copper depending on user preference and availability.
Specific features for the IC200ALG620 include selectable resistance measurements in tenths of degrees or ohms. Individual channel configuration is featured with selectable resistance ranges of 0-500 or 0-3000 ohms. Reports of high/low, open wire, under/over range, and input short alarms are also standard. The IC200ALG620 offers two data acquisition rates based on the 50 or 60 Hz line frequencies.
As with many modules, LED indicators are standard and indicate normal operation, updates, errors, or lack of power in the backplane. Automatic A/D calibration occurs at power-up and is repeated periodically to account for ambient temperature changes around the module. The RTD input module provides for four words on input data and is compatible with a number of PLC CPU and NIU versions of 1.10 or higher in most cases.
Upon installation, no loop power is required, but the cable should be grounded at the source device or at the I/O module using an auxiliary I/O terminal. Depending on the way the module is installed and the use of the module, different types of grounding or set up may be needed.
Each channel in the IC200ALG620 module can be configured as either inactive or active based on user needs. However, if the channel is inactive, it remains unscanned and set as a value of zero. The user also has the option to set alarm limits within the provided range or beyond the range so they will never be activated.
Technical Specifications
| No. of channels: | 4 (3-wire and/or 4-wire RTDs) |
| Voltage Range: | 5 V nominal |
| RTD Types: | Platinum, Copper, Nickel, Nickel/Iron |
| Update Rate: | 210 ms |
| LED Indicators: | OK |
| Power Consumption: | 125 mA from +5V bus |
Troubleshooting
Troubleshooting IC200ALG620
Troubleshooting information is available on IC200ALG620's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC200ALG620
PDF Supply can repair your IC200ALG620 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC200ALG620? Answer: The IC200ALG620 is a 4-Channel, 16-Bit, RTD, Analog Input module from the GE Fanuc Versamax Series.
- Question: What are some characteristics of the channels? Answer: There are four 3-wire an/or 4-wired RTD channels on IC200ALG620.
- Question: What does the OK LED indicate? Answer: GREEN indicated backplane power is present, AMBER indicates module fault.
- Question: What is the backplane current consumption? Answer: 5V output: 125mA maximum
- Question: Is there external power supply? Answer: No
- Question: What are the configuration parameters? Answer: None
- Question: What inputs does this module accept? Answer: This module accepts inputs from 4 independent 3-wire and/or 4-wire platinum, nickel, nickel/iron or copper RTDs.
- Question: What is the update rate per channel? Answer: 210 ms @ 60 Hz, 230 ms @ 50Hz
- Question: What should I do if my IC200ALG620 is not working properly? Answer: Your IC200ALG620 may need repair.
For more information on the IC200ALG620 4-Channel, 16-Bit, RTD, Analog Input module of the GE Fanuc Versamax Series, please see the Datasheet User-Manual.
Coming Soon...
Common related search terms: DatasheetEmerson, Manual, PDF, PLC, Price, Repair, Specification, User-Manual, Wiring,
