GE / IP FANUC Series 90/30 In Stock
IC200ALG326
SKU 2172249 UPC 0578580293902
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC200ALG326 IC200ALG326AIC200ALG326BIC200ALG326CIC200ALG326DIC200ALG326EIC200ALG326FIC200ALG326GIC200ALG326HIC200ALG326IIC200ALG326JIC200ALG326KIC200ALG326LIC200ALG326-LTIC200ALG326MIC200ALG326NIC200ALG326OIC200ALG326PIC200ALG326QIC200ALG326RIC200ALG326SIC200ALG326TIC200ALG326UIC200ALG326VIC200ALG326WIC200ALG326XIC200ALG326YIC200ALG326Z
Common misspellings:
- 1C200ALG326
- IC2o0ALG326
- IC20oALG326
- IC200A1G326
- IC200ALG326
Technical Specifications for IC200ALG326
| Manufacturer | GE Fanuc |
|---|---|
| Series | Versamax |
| Part Number | IC200ALG326 |
| Product Type | Output Module |
| Product Category | Current Analog Output Module |
| Bits | 13 Bits |
| Number of Outputs | 8 |
| Voltage Range | 18-30V DC |
| Current Range | 4-20 mA, 0-20 mA |
| LED Indicators | FLD PWR, OK |
Product Description
The IC200ALG326 is an 8-Channel, 13-Bit Current, Analog Output module from the GE Fanuc Versamax Series. The single-ended channels of the IC200ALG326 are all in one group.
The analog output module offers eight 4mA to 20mA analog current-sourcing outputs. When configured in the 0-20mA mode, a current output signal value of 0mA links to a %AQ value of 0 counts, and 20mA corresponds to a %AQ rate of +32,000 counts. In 4-20mA range mode, a value of 0 %AQ counts corresponds to an output current of 4mA. A value of +32,000 %AQ counts corresponds to an output current of 20mA. Installation of the IC200ALG326 in a PLC rack will result in conversion of negative value commands 0mA regardless of the range designated. If the IC200ALG326 is controlled by a Network Interface Unit, it changes any negative value commands to the low end of the range.
The IC200ALG326 output range is default but can easily be configured in conjunction with a jumper to modify the output range. The use of a jumper also allows outputs to keep their last states or default if backplane power or communications are interrupted or the PLC is not operating. The outputs will continue in their last state or default, until different output data is received from the backplane or until field power is detached. If hot insertion of a module is done incorrectly, the operation of other modules on the same backplane may be disturbed.
Technical Specifications
| No. of channels: | 8 single-ended, one group |
| Voltage Range: | 18 - 30 VDC |
| Current Range: | 4 - 20 mA, 0 - 20 mA |
| Update Rate: | 15 ms |
| LED Indicators: | FLD PWR, OK |
| Power Consumption: | 50 mA from +5V bus |
When the GE Fanuc IC200ALG326 current analog output module is installed in the PLC rack, it converts the negative value which commands 0 milliamps irrespective of the designated range. If this module is controlled by the Network Interface Unit or NIU, the negative values changes the commands to the low-end range. The IC200ALG326 module has an output range that is the default, and it allows for easy configuration in concurrence with the jumper that helps to modify the output range. Using the jumper enables the output to keep the last states or the default communication and power if the backplane is interrupted, or the PLC is not operating. The output points continue to default or their last state until the backplane provides different output data or until the field power is disconnected.
Troubleshooting
Troubleshooting IC200ALG326
Troubleshooting information is available on IC200ALG326's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC200ALG326
PDF Supply can repair your IC200ALG326 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC200ALG326? Answer: The IC200ALG326 is an 8-Channel, 13-Bit Current, Analog Output module from the GE Fanuc Versamax Series.
- Question: What are some characteristics of the channels? Answer: There are 8 single-ended channels, all in one group.
- Question: What does the FLD PWR LED indicate? Answer: This LED indicates that field power is present.
- Question: What does the OK LED indicate? Answer: This LED indicates that backplane power is present.
- Question: What is the backplane current consumption? Answer: 5V output; 50 mA maximum
- Question: What are the configuration parameters? Answer: Output default
- Question: What is the output current? Answer: 4 to 20 mA (default), 0 to 20 mA (with jumper)
- Question: What is the update rate per module? Answer: 15 ms maximum
- Question: What is the output default? Answer: Hold Last State (default), Low End of Range (configurable)
- Question: What should I do if my IC200ALG326 is not working properly? Answer: Your IC200ALG326 may need repair.
For more information on the IC200ALG326 8-Channel, 13-Bit Current, Analog Output Module of the GE Fanuc Versamax Series, please see the Datasheet User-Manual.
Coming Soon...
Common related search terms: DatasheetEmerson, Manual, PDF, PLC, Price, Repair, Specification, User-Manual, Wiring,
