1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC200ALG265-Manual

SKU 2174324  UPC 0387757191886

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description


The IC200ALG265 is a 15-Channel, 15-Bit Voltage Analog Input Module manufactured by GE Fanuc for its Versamax Series. This module acts as an interface to 15 voltage inputs. The IC200ALG265 module is single-ended and all inputs share a common return. The module is rated for use in SIL2 applications, and it features improved overvoltage protection and improved internal diagnostics. Typically, the IC200ALG265 protects against voltages up to 30V DC. It is approved by the Technical Inspection Association (TUV) for use in the safety-relevant section of a GMR system.

The IC200ALG265 has an input voltage of between -10 V to +10 V and an input impedance of 100 K Ohms minimum. The IC200ALG265 does not require any external power source to run its operations; however, power for the user’s transceivers must be supplied from an external source. This unit is compatible with CPU/NIU, and they are in control of performing intelligent processing for this module. The IC200ALG265 provides 15 words of analog data input, and in the event of a module failure or loss of power, analog inputs are software-configurable to either default or hold the last state.

The current input module is equipped with a jumper on the carrier terminals that selects either 4-20mA or 0-20mA input ranges. However, it is important to know that both input and output modules report internal hardware error upon detection of an A/D conversion malfunction in excess of +/-6%. The module detects this malfunction by applying a known stimulus to the A/D conversion path and authenticating the expected result.

The IC200ALG265 turns off the OK LED whenever an expected error occurs three times in a row. It reports the malfunction to the CPU/NIU. If this occurs, the module must be replaced or power cycled to clear the error.

Technical Specifications

No. of channels: 15 single-ended, one group
Voltage Range: -10 to +10 volts DC
Current Range: N/A
Update Rate: 7.5 ms
Input Filter Response:   N/A
Power Consumption: 150mA from +5V bus

 

 

 

Analog input 15 bit 0 - 10VDC voltage, 15 channel, TUV approved. IC200A IC200AL IC200ALG
ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: Datasheet, Emerson, Manual, PDF, PLC, Price, Repair, Specification, User-Manual, Wiring, 

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.