GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

Mon-Fri 8AM-5PM EST

IC200ALG240-Price

Loading...

SKU 2174258  UPC 0968047653811

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description



Made by GE Intelligent Platforms, the IC200ALG240 is a VersaMax Analog Input Module.
This module is capable of processing input signals from a maximum of eight analog devices and providing data output at a resolution of 16 bits. The IC200ALG240 has two modes of operation: voltage mode and current mode. In voltage mode, the input range is 1 to 20 milliamps. In current mode, the input range is +/- 10 volts.

 

This module has eight isolated input channels, each of which has a current range of 4 to 20 milliamps. Additional features of this device include the ability to detect open wires, a converter resolution of 16 bits, and precise factory calibration. Certain features of the IC200ALG240 can also be configured and altered via software, such as changing alarm levels for individual channels, changing the default values for individual channels, and scaling individual channels. The update rate for channel data is 20mS at 50Hz filter frequency and 16.7mS at 60Hz filter frequency.

 

To monitor status for this module, diagnostic features and on-board LED lights are provided. Diagnostic reports on range status, field power loss, NVRAM faults, the presence of open wires, and more are available. The LED lights indicate module and power status.

 

The IC200ALG240 is 4.3 inches wide, or 110mm; 2.63 inches tall, or 66.8mm; and 1.956 inches deep, or 50mm. Note: These dimensions do not include the carrier or mating connector height. A 5V and a 3.3V connection backplane are used for this module, through which power is provided to the device. The 5V backplane consumes up to 15 milliamps of current, and the 3.3V backplane consumes up to 120 milliamps of current.

Technical Specifications


No. of Inputs: 8 isolated 
Voltage Range: -10 to +10 volts DC
Current Range: 4 - 20 mA
Update Rate: 20 ms
Input Filter Response: N/A
Power Consumption:     15 mA from +5V bus

 

 
Analog input 16 bit voltage/current 8 isolated channels IC200A IC200AL IC200ALG
ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: DatasheetEmersonManualPDFPLCPriceRepairSpecificationUser-ManualWiring

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.