1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC200ALG230-PLC

SKU 2170028  UPC 0799705802896

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description


The IC200ALG230 is an Analog Input Module manufactured by GE Fanuc Automation as part of the VersaMax series. This module interfaces to either four voltage inputs or four current inputs. This device supports 12 bits of voltage per current and one group containing up to four single-ended channels. All inputs are also single-ended and share a common return.

 

This module receives power from a power supply embedded into the backplane. While an external power supply is not required for this analog input module to function, any user transceivers will require an external power supply. Five volts and a maximum of 125 milliamps of current is consumed by the backplane. Default bipolar input voltage is +/- 10 volts DC with unipolar voltage being anywhere from 0 to 10 volts.

 

Two onboard LED lights indicate module power status: The OK LED indicates that the backplane is receiving power, and the INT PWR LED indicates that the analog field circuits are receiving power. This module can also report any loss of internal power.

 

To configure either voltage or current mode on the carrier terminals, two jumpers are used—one jumper for current mode and one jumper for voltage mode. In current mode, the range is anywhere from 4 to 20 milliamps. In voltage mode, the range is 0 to 10 volts. These jumpers are also used to configure either bipolar or unipolar operations while in voltage mode. Devices connected to each channel should be either voltage or current, not both. The IC200ALG230 supports field wiring on carriers with two and three rows of terminals.

Technical Specifications

No. of channels:  4 single ended, one group  
Voltage Range: -10 to +10 volts DC 
Current Range: 4 - 20 mA
Update Rate: 0.4 ms
Input Filter Response:    5.0 ms
Power Consumption: 125mA from +5V bus 

 

 
Analog input 12 bit voltage/current 4 channel IC200A IC200AL IC200ALG
ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: Datasheet, Emerson, Manual, PDF, PLC, Price, Repair, Specification, User-Manual, Wiring, 

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.