GE / IP FANUC Series 90/30 In Stock
SKU 2172055 UPC 0865921450569
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC200UEX012 IC200UEX012AIC200UEX012BIC200UEX012CIC200UEX012DIC200UEX012EIC200UEX012FIC200UEX012GIC200UEX012HIC200UEX012IIC200UEX012JIC200UEX012KIC200UEX012LIC200UEX012-LTIC200UEX012MIC200UEX012NIC200UEX012OIC200UEX012PIC200UEX012QIC200UEX012RIC200UEX012SIC200UEX012TIC200UEX012UIC200UEX012VIC200UEX012WIC200UEX012XIC200UEX012YIC200UEX012Z
Versamax micro 24VDC power supply 14 point exp. 24VDC In relay out IC200UEX012 GE PLC
The IC200UEX012 power supply was manufactured by GE Fanuc and in the Versamax Micro Series 90-30 product line. It has a fast cycle time with intuitive programming and configuration processes designed to deliver maximum productivity, with 8 inputs that are 24 Volts DC positive and negative logic inputs. The output setup is 6 normally open 2-Amp relay output circuits. The IC200UEX012 power supply features 200 milliamps output power supply rated at 24 Volts DC for the end user devices as well as input circuits. The active current transducer level at 24 Volts DC is -20 percent to +25 percent, meaning that no current is required to power the source; instead, an electrical signal is produced based on the physical quantity that is proportional to the input. The holdup time this device takes after a power disruption is 10 milliseconds at 19.2 Volts DC and it is rated for a 4 Watts input power supply.
The inrush current of the IC200UEX012 power supply is 1 Amp at 30 Volts DC, and this reduces the amount of current that is required to charge the capacitors and the time needed for the same current to switch on the device. Both the on and off threshold voltage levels are 15 Volts DC minimum under 7.5 milliamps of typical current when the input resistance is 2.8 kiloohms. The 6 Form A (SPST: single-post, single-toss) typically open transfer yields can control numerous kinds of devices, for example, engine starters, solenoids, and pointers. An external source of AC or DC power must be provided to power these devices. The input voltage range of the IC200UEX012 power supply is between 0 and 30 Volts DC, and this range ensures that the current remains stable as the voltage varies. The contact response time is 15 milliseconds on and off.
Common related search terms: Emerson
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.