GE / IP FANUC Series 90/30 In Stock
Home » GE Fanuc Emerson » Series 90-70 » IC697MDL740 » You are here: IC697MDL740CA
IC697MDL740CA
SKU 2174169 UPC 0814226230642
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The "CA" Revision is for the PDF Supply Conformal Coating Service. PDF Supply warranty will apply. A $150 service charge will be added at checkout.
Product Description
The GE Fanuc IC697MDL740 is a discrete output module that can be used to power devices like motor starters, solenoids and indicators. These loads can be connected to one of the module's 16 outlet points that are grouped into clusters of four points. The output provided to each of these points is 24/48 Volt direct current at a rate of 2 amperes per point of long-term current. The input surge conduction capacity of the IC697MDL740 is, however, more significant than 2 amperes. Each of the output point clusters has a common 10-ampere fuse.
The face of the module hosts a series of LED indicators giving the status at different locations of the circuit and the fuses.
The IC697MDL740 does not call for a DIP or jump switches for its configuration. Configuration can be carried out by the user through a Windows 96 or Windows NT running a Windows or MS-DOS software. This process is carried out using the SNP port or Ethernet TCP/IP.
Furthermore, the user is allowed to configure the IC697MDL740 such that the output points get turned off or continue in the existing state.
A mechanical key is provided with each IC697MDL740 to customize a slot to accommodate the module. The key is inserted into the back plate of the IC697MDL740 such that it slides into the centre of the slot where the module is initially installed in. This key stays in the groove even after the removal of the module to prevent accidental misuse of the slot. However, this accessory can be removed if necessary after the extraction of the IC697MDL740. The removal of the module can be carried out by manipulating the clips securing it to the slot.
Technical Specifications
| Rated Voltage: | 24 or 48 volts DC |
| Number of Outputs: | 16 Outputs (4 groups of 4) |
| Output Current: | 2 Amps per point, 4 Amps per group |
| Current Required: | 0.15 Amps |
| Output Voltage Range: | 20 to 60 volts |
| DC Power: | Yes |
Common related search terms: Datasheet, Emerson, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
You May Also Need
Your Item was added to your shopping cart!
Free Ground Shipping*
US continental orders placed Monday-Friday before 4:00pm EST! Free Ground delivery available on all orders.
Adding Items to Cart
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.