GE / IP FANUC Series 90/30 In Stock
IC697MDL654
SKU 2171457 UPC 0748813396308
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC697MDL654 IC697MDL654AIC697MDL654BIC697MDL654CIC697MDL654-CAIC697MDL654DIC697MDL654EIC697MDL654FIC697MDL654GIC697MDL654HIC697MDL654IIC697MDL654JIC697MDL654KIC697MDL654LIC697MDL654-LTIC697MDL654MIC697MDL654NIC697MDL654OIC697MDL654PIC697MDL654-RR
Common misspellings:
- 1C697MDL654
- IC697MD1654
- IC697MDL65A
- IC697MDL654
Product Description
The IC697MDL654 is a 48 VDC Positive/Negative Logic 32-Point Input Module by GE Fanuc for series 90-70 PLCs. The inputs of this module divide into four groups, each having a separate power supply. It can be used to connect to a variety of different switches and electronic proximity sensors with either two or three wire connectors. With some CPUs, it can also apply different input filter time schedules and may cause CPU interruption. To determine compatibility of input devices, such as two-wire sensors, ON and OFF states must be checked.
The IC697MDL654 connects to a backplane connector and secures itself in place with a jackscrew. To remove or install, power must be OFF, and then the user is free to disconnect. Untightening the safety screw and pressing the clips on the back of the cover allow the terminal board to disengage. To wire the terminals, wires #22 to #14 can be used. Once everything is connected, the wire bundle can be secured with a tie at the bottom of the terminal board. A hinged door provides both coverage of the inside of the board as well as space for an identification label.
Every IC697MDL654 module includes a mechanical key. This key hooks onto the board below the connector. When it is attached to a slot, no other type of module can be connected on that slot. To assure proper ventilation, install the module in a way that provides at least six inches of empty space around it.
Technical Specifications
| Rated Voltage: | 48 volts DC |
| Number of Inputs: | 32 Inputs (4 groups of 8 each) |
| Input Current: | 4.7 mA at rated voltage |
| Current Required: | 0.3 Amps |
| Input Voltage Range: | -3 to +56 volts DC |
| DC Power: | Yes |
Technical Information
Specifications
|
Rated Voltage: Inputsper Module: |
48 volts DC 32 (four groups of eight inputs each) |
|
Isolation: |
1500 volts RMS - any input to backplane 500 volts RMS between input groups |
|
Input Voltage Range (Vs) |
–3 to +56 volts DC |
|
InputCurrent: |
4.7mA (typical) at rated voltage |
|
InputImpedance: |
10.3Kohm, typical |
|
InputCharacteristics- |
|
|
On-stateVoltage: |
33 volts to 56 volts |
|
Off-stateCurrent |
3mA to 7mA |
|
Off-state Voltage: |
0 volts to 10 volts |
|
Off-stateCurrent: |
0 to 2mA (2mA minimum at 5V input) |
|
Filter Delay Time: |
1 ms or 10 ms configurable |
|
Current Required from 5VDCbackplanebus: |
0.30amps |
|
VME |
System designed to support the VME standard C.1 |
Troubleshooting
Troubleshooting IC697MDL654
Troubleshooting information is available on IC697MDL654's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC697MDL654
PDF Supply can repair your IC697MDL654 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC697MDL654? Answer: The IC697MDL654 is a 48 Volt DC, Positive/Negative Logic, 32-Point Input module from the GE Fanuc Series 90-70.
- Question: What features does it include? Answer:
- 32 points- 4 isolated groups of 8 points each
- Positive/Negative Logic Compatibility
- Proximity switch compatible
- Input filter selectable* - 1 mS or 10 mS
- One input configurable as interrupt*
- *These features are available for all IC697 PLCs. They may, however, not be available when this module is used with other types of PLCs.
- Question: The LED indicators (located at the top of the module) do what? Answer: They let you know the on/off status of each point on the logic (PLC) side of the circuit.
- Question: What is special about the I/O references? Answer: They are configurable without the use of jumpers or DIP switches on the module.
- Question: Configuration of IC697MDL654 is done through what? Answer: Configuration of IC697MDL654 is completed using the configuration function of MS-DOS, through Windows programming software on Windows 95, through Windows NT over Ethernet TCP/IP, or through the SNP port.
- Question: What should I do in the event my IC697MDL654 is not working properly? Answer: Your IC697MDL654 may be in need of repair.
For more information on the IC697MDL654 48 Volt DC, Positive/Negative Logic, 32-Point Input Module of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual.
Common related search terms: DatasheetEmerson, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
