GE / IP FANUC Series 90/30 In Stock
IC697MDL640
SKU 2177420 UPC 0739367884977
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC697MDL640 IC697MDL640AIC697MDL640BIC697MDL640CIC697MDL640-CAIC697MDL640DIC697MDL640EIC697MDL640FIC697MDL640GIC697MDL640HIC697MDL640IIC697MDL640JIC697MDL640KIC697MDL640LIC697MDL640-LTIC697MDL640MIC697MDL640NIC697MDL640OIC697MDL640PIC697MDL640-RR
Common misspellings:
- 1C697MDL640
- IC697MD1640
- IC697MDL6A0
- IC697MDL64o
- IC697MDL640
Product Description
IC697MDL640 is a 125 VDC Positive/Negative Logic Discrete Input Module by GE Fanuc. This module’s standard features include 16 points comprised of four isolated groups (each having four points), positive/negative logic compatibility, and proximity switch compatibility. The IC697MDL350 has input filter selection capability (1 ms or 10 ms), and one input is configurable as interrupt; however, these particular features depend on use of IC697 PLCs. Refer to the reference manual for other options.
The IC697MDL350 is equipped with input current-voltage characteristics that meet IEC standard (type 1) specifications. LEDs provide the ON-OFF status of each point on the logic side of the circuit (PLC) and are located at the top of the module. This module is mechanically keyed to guarantee correct replacement with a similar type in the field. I/O references are configurable by the user without the use of jumpers or DIP switches. Configuration is completed using the configuration function of the MS-DOS or Windows programming software (Windows 95 or Windows NT over Ethernet TCP/IP or through the SNP port). Use the programming device for programming software configuration functionality.
The IC697MDL350 provides positive and negative logic characteristics, meaning the user common receives current from the input device. The input device is connected between the power bus and the module input. The module is compatible with a variety of pushbuttons, limit switches, and selector switches.
Technical Specifications
| Rated Voltage: | 125 volts DC |
| Number of Inputs: | 16 Inputs (4 groups of 4) |
| Input Current: | 5 mA at rated voltage |
| Current Required: | 0.3 Amps |
| Input Voltage Range: | -35 to +145 volts DC |
| DC Power: | Yes |
Technical Information
Specifications
|
Rated Voltage: Inputs per Module +: |
125 volts DC 16 (four groups of four inputs each) |
|
Isolation: |
1500 volts RMS - any input to backplane 500 volts RMS between input groups |
|
Input Voltage Range (Vs) |
–35 to +145 volts DC |
|
InputCurrent: |
5mA (typical) at rated voltage 24.5Kohm, typical
Positive: 90 volts to 145 volts Negative: –20 volts to Vs –90 volts 3mA to 7mA Positive: –35 volts to +35 volts Negative: Vs –35 volts to 56 volts 0 to 2mA (2mA mimimum at 125V input) 1 ms or 10 ms configurable |
|
InputImpedance: |
|
|
InputCharacteristics- |
|
|
On-stateVoltage: |
|
|
On-stateCurrent: |
|
|
Off-state Voltage: |
|
|
Off-stateCurrent: |
|
|
Filter Delay Time: |
|
|
Current Required from 5VDCbackplanebus: |
0.30amps |
|
VME |
System designed to support the VME standard C.1 |
t Refer to GFK-0867B, or later for product standards and general specifications. For installations requiring compliance to more stringent requirements (for example, FCC or European Union Directives), refer to Installation Requirements for Conformance to Standards.
+Number of inputs on is dependent upon ambient temperature as shown in Figure 3.
Table 2. Ordering Information
|
Description |
Catalog Number |
|
Input Module: 125 Volt DC Positive / NegativeLogic,16Points |
IC697MDL640 |
Note: For Conformal Coat option, or Low Temperature Testing option please consult the factory for price and availability.
46-6 Series 90 -70 Programmable Controller Data Sheet Manual GFK-0600F
Troubleshooting
Troubleshooting IC697MDL640
Troubleshooting information is available on IC697MDL640's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC697MDL640
PDF Supply can repair your IC697MDL640 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC697MDL640? Answer: The IC697MDL640 is an 125 Volt DC, Positive/Negative Logic, 16-Point Input module from the GE Fanuc Series 90-70.
- Question: What features does it include? Answer:
- 16 points- 4 isolated groups of 4 points each
- Positive/Negative Logic compatibility
- Proximity switch compatible
- Input filter selectable* - 1 mS or 10 mS
- One input configurable as interrupt*
- * These features are available for all IC697 PLCs. They may, however, not be available when this module is used with other types of PLCs.
- Question: The LED indicators (located at the top of the module) do what? Answer: They let you know the on/off status of each point on the logic (PLC) side of the circuit.
- Question: What is special about the I/O references? Answer: They are configurable without the use of jumpers or DIP switches on the module.
- Question: Configuration of IC697MDL640 is done through what? Answer: Configuration of IC697MDL640 is completed using the configuration function of MS-DOS, through Windows programming software on Windows 95, through Windows NT over Ethernet TCP/IP, or through the SNP port.
- Question: What should I do in the event my IC697MDL640 is not working properly? Answer: Your IC697MDL640 may be in need of repair.
For more information on the IC697MDL640 125 Volt DC, Positive/Negative Logic, 16-Point Input Module of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual.
Common related search terms: DatasheetEmerson, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
