GE / IP FANUC Series 90/30 In Stock
IC697MDL350
SKU 2177265 UPC 0540232311609
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC697MDL350 IC697MDL350AIC697MDL350BIC697MDL350CIC697MDL350-CAIC697MDL350DIC697MDL350EIC697MDL350FIC697MDL350GIC697MDL350HIC697MDL350IIC697MDL350JIC697MDL350KIC697MDL350LIC697MDL350-LTIC697MDL350MIC697MDL350NIC697MDL350OIC697MDL350PIC697MDL350-RR
Common misspellings:
- 1C697MDL350
- IC697MD1350
- IC697MDL35o
- IC697MDL350
Technical Specifications for IC697MDL350
| Manufacturer | GE Fanuc |
|---|---|
| Series | Series 90-70 |
| Part Number | IC697MDL350 |
| Product Type | Output Module |
| Number of Outputs | 32 |
| Number of Output Groups | 4 |
| AC Power | Supported |
| DC Power | Not Supported |
| Current per Output | 0.5 Amps |
| Current per Group | 2 Amps |
Product Description
IC697MDL350 is a 120 VAC 0.5 Amp, 32-Point Discrete Output Module in the GE Fanuc Series 90-70. Standard features include four isolated groups of 8 points equaling 32 points, 0.5 amp point capacity, and a high inrush capacity of 20x the rated current. The IC697MDL350 output module allows each group of 8 points to be used on a different phase of the AC supply. Each group of outputs is fused with a 5 amp fuse and demonstrates a high degree of inrush current, making the outputs appropriate for a range of inductive and incandescent loads.
LEDs indicate the ON-OFF status of each point on the PLC side of the circuits. Additionally, there is an LED that confirms status of the fuses located at the top of the module. The IC697MDL350 module is mechanically keyed to promote correct replacement with a similar type in the field. The user is able to configure I/O references without using jumpers or DIP switches.
The IC697MDL350 is compatible with a number of load devices, including solenoids, motor starters, and indicators. The 0.5 amp rating applies to the long-term current capacity of each point. Due to heat dissipation within the module, the max current capacity for each group of outputs is limited at higher temps.
Technical Specifications
| Rated Voltage: | 120 volt AC |
| Number of Outputs: | 32 Outputs (4 groups of 8) |
| Output Current: | 0.5 Amps per point, 2 Amps per group |
| Current Required: | 0.5 Amps |
| Freq: | 47 to 63 Hz |
| DC Power: | No |
The GE Fanuc IC697MDL350 output module is a GE Series 90-70 discrete output module. It has 32 discrete output channels. It can operate on AC power, but not on DC power. The nominal rated AC voltage of the IC697MDL350 discrete output module is 120 Volts AC. Each of the output points has a current rating of 0.5 Amps and all of the outputs are arranged in 4 groups of 8. The current rating for each group is 2 Amps. Each output point also has an LED status indicator that shows whether an output point is powered on or off. The IC697MDL350 discrete output module has fuses for protection. It does not need jumpers or DIP switches to be configured properly the way that many other GE I/O modules do. The IC697MDL350 discrete output module can be configured with MS-DOS or with the Windows Programming Software.
The GE Fanuc Series 90-70 IC697MDL350 discrete output module operates with a frequency range of 47 to 63 Hertz. The outputs on this discrete output module are suitable for a variety of industrial inductive loads, and each of the 4 output groups is protected by a fuse that is rated at 5 Amps. The IC697MDL350 discrete output module can connect to motor starter devices, indicators, and solenoids, and it is well-equipped to work with these devices. This discrete output module can operate with an AC power supply that supports multiple phases, and it can use a different AC power supply phase for each of its 4 output groups.
Technical Information
Specifications
|
Rated Voltage: OutputsperModule: |
120 volts AC 32 (four groups of 8 outputs each) |
|
Isolation: |
1500 volts - any output to backplane 500 volts between groups |
|
Output VoltageRange: |
85 to 132 volt, 47-63 Hz |
|
OutputCurrent: |
0.5 amps maximum per point |
|
|
2 amps maximum per group |
|
OutputCharacteristics- |
|
|
Inrush Current: |
10 amps maximum per point for one cycle (20 ms) |
|
Output VoltageDrop: |
3voltsmaximum |
|
ResponseTime-On: |
1 msmaximum |
|
ResponseTime-Off: |
1 / 2cycle |
|
OutputLeakage: |
1.5mAmaximum |
|
Current Required from 5V Bus: |
0.5 amp |
|
VME |
System designed to support the VME standard C.1 |
Troubleshooting
Troubleshooting IC697MDL350
Troubleshooting information is available on IC697MDL350's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC697MDL350
PDF Supply can repair your IC697MDL350 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC697MDL350? Answer: The IC697MDL350 is an 120 Volt AC, 0.5 Amp, 32-Point Output module from the GE Fanuc Series 90-70. This module provides 32 output points in 4 isolated groups of 8 points each.
- Question: What features does it include? Answer:
- 32 points- 4 isolated groups of 8 points each
- 0.5 amp capacity per point
- high inrush capacity (20x rated current)
- Question: The 32 output points allow what to happen? Answer: It allows each group of 8 points to be used on different phases of the AC supply.
- Question: Each output point is fused with what? Answer: Each group of 8 outputs is individually fused with a 5 amp fuse.
- Question: Because IC697MDL350 provides a high degree of inrush current, what does that mean? Answer: It means that it makes the outputs suitable for a wide range of inductive and incandescent loads.
- Question: IC697MDL350 will pick up what size contactors? Answer: This module will pick up most size 2 contactors.
- Question: Configuration of IC697MDL350 is done through what? Answer: Configuration of IC697MDL350 is completed using the configuration function of MS-DOS, through Windows programming software on Windows 95, through Windows NT over Ethernet TCP/IP, or through the SNP port.
- Question: What should I do in the event my IC697MDL350 is not working properly? Answer: Your IC697MDL350 may be in need of repair.
For more information on the IC697MDL350 120 Volt AC, 0.5 Amp, 32-Point Output Module of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual.
PDFsupply Tech
The IC697MDL350 is a module that has a total of 32 points, more than the IC697MDL341 which has 12 isolated points. This allows each of the four groups to be used on a different phase of the AC supply.
Common related search terms: DatasheetEmerson, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
