GE / IP FANUC Series 90/30 In Stock
IC697MDL341
SKU 2173336 UPC 0195555648583
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC697MDL341 IC697MDL341AIC697MDL341BIC697MDL341CIC697MDL341-CAIC697MDL341DIC697MDL341EIC697MDL341FIC697MDL341GIC697MDL341HIC697MDL341IIC697MDL341JIC697MDL341KIC697MDL341LIC697MDL341-LTIC697MDL341MIC697MDL341NIC697MDL341OIC697MDL341PIC697MDL341-RR
Common misspellings:
- 1C697MDL341
- IC697MD1341
- IC697MDL3A1
- IC697MDL34l
- IC697MDL341
Product Description
IC697MDL341 is a 120 / 240 VAC Discrete Output Module by GE for the 90-70 series. This module is equipped with 12 isolated points to ensure use of different phases on the AC supply. It has a 2 amp capacity per point and high inrush capacity at 10x the rated current to allow for an impressive range of inductive and incandescent loads. The module’s outputs are each fused with a 3.15 amp replaceable fuse.
The IC697MDL341 module utilizes LED indicators to provide the ON or OFF status of each point on the logic side of the circuit. Additionally, there is an LED that displays the status of the fuses found at the top of the module. If one or more of the fuses should blow, this LED will show ON. The module is mechanically keyed to guarantee correct replacement with a similar module type in the field. The user can configure I/O references, and conveniently, jumpers or DIP switches on the module are not needed.
Load devices including solenoids, motor starters, and indicators can benefit from the use of this module. A rating of 2 amps per point applies to the long-term current capacity of each point. Overall heat dissipation within the module limits the maximum current to 16 amps. Each output can transiently conduct a surge current greater than its long-term current rating. The rate at which surges can be repeated is dependent upon the current rating of the device and the percent of time the device is ON (or duty cycle).
The IC697MDL341 module is mechanically keyed. This prevents unintentional substitution of one module for another type in a given slot. The key fits a distinct shape on the board found below the connector. Each key is prepackaged with the IC697MDL341 module.
Technical Specifications
| Rated Voltage: | 120/240 volt AC |
| Number of Outputs: | 12 individually isolated |
| Output Current: | 2 Amps per point, 16 Amps per module |
| Current Required: | 0.25 Amps |
| Freq: | 47 to 63 Hz |
| DC Power: | No |
Technical Information
Specifications
|
Rated Voltage: Outputs per Module: |
120/240 volts AC 12 individually isolated |
|
Isolation: |
1500 volts - any output to backplane 500 volts between points |
|
Output Voltage Range: Output Current: |
85 to 264 volts AC, 47-63 Hz 2 amps maximum per point 16 amps maximum per module |
|
OutputCharacteristics |
|
|
Inrush Current: |
20 amps maximum for one cycle (20 ms) |
|
Output Voltage Drop: |
1.5 volts maximum |
|
Response Time-On: |
1 ms maximum |
|
Response Time-Off: |
1/2 cycle maximum |
|
Output Leakage: |
3 mA maximum at 120 volts AC |
|
|
6 mA maximum at 240 volts AC |
|
Current Required from 5 V Bus: |
.25 amp |
|
VME |
System designed to support the VME standard C.1 |
Troubleshooting
Troubleshooting IC697MDL341
Troubleshooting information is available on IC697MDL341's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC697MDL341
PDF Supply can repair your IC697MDL341 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC697MDL341? Answer: The IC697MDL341 is an 120/240 Volt AC, 2 Amp, Isolated, 12-Point Output module from the GE Fanuc Series 90-70.
- Question: What features does it include? Answer:
- 12 individually isolated points
- 2 amp capacity per point
- high inrush capacity
- Question: The 12 isolated points allow what to happen? Answer: It allows each point to be used on different phases of the AC supply.
- Question: Each output point is fused with what? Answer: Each output point is individually fused with a 3.15 amp replaceable fuse.
- Question: Because IC697MDL341 provides a high degree of inrush current, what does that mean? Answer: It means that it makes the outputs suitable for a wide range of inductive and incandescent loads.
- Question: IC697MDL341 will pick up what size contactors? Answer: This module will pick up most size 4 contactors.
- Question: Configuration of IC697MDL341 is done through what? Answer: Configuration of IC697MDL341 is completed using the configuration function of MS-DOS, through Windows programming software on Windows 95, through Windows NT over Ethernet TCP/IP, or through the SNP port.
- Question: What should I do in the event my IC697MDL341 is not working properly? Answer: Your IC697MDL341 may be in need of repair.
For more information on the IC697MDL341 120/240 Volt AC, 2 Amp, Isolated, 12-Point Output Module of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual.
PDFsupply Tech
The IC697MDL341 is a module by GE for the series 90-70 which has 12 isolated points which allows for use of different phases on the AC supply. This module has less points than the IC697MDL340 which has 16 points total.
Common related search terms: DatasheetEmerson, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
