GE / IP FANUC Series 90/30 In Stock
IC697MDL250
SKU 2171038 UPC 0338792828404
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC697MDL250 IC697MDL250AIC697MDL250BIC697MDL250CIC697MDL250-CAIC697MDL250DIC697MDL250EIC697MDL250FIC697MDL250GIC697MDL250HIC697MDL250IIC697MDL250JIC697MDL250KIC697MDL250LIC697MDL250-LTIC697MDL250MIC697MDL250NIC697MDL250OIC697MDL250PIC697MDL250-RR
Common misspellings:
- 1C697MDL250
- IC697MD1250
- IC697MDL25o
- IC697MDL250
Product Description
The IC697MDL250 Discrete Input Module by GE Fanuc has 32 points comprised of four isolated groups, which ensures each group of eight points can be used on a different AC supply phase. This 120 VAC module is equipped with a 20 ms input filter and is proximity switch compatible.
The IC697MDL250 module’s reactive input is in accordance with IEC standard type 2. Additionally, input characteristics work with a vast number of available proximity switches. LEDs indicate ON-OFF status for each point on the logic/PLC side of the circuit and are easily located at the top of the module. The IC697MDL250 module is mechanically keyed to guarantee appropriate replacement with a similar field type. I/O references are user-configurable eliminating the need for jumpers or DIP switches. Configuration is completed via MS-DOS or Windows programming software, and the configuration function is already installed on the device.
The IC697MDL250 module can be used with a wide variety of input devices, including pushbuttons, limit switches, or selector switches and electronic proximity switches (2- or 3-wire type). The module’s input circuitry allows for low heat dissipation, which in turn assists with extreme reliability and longevity.
This module is equipped with a mechanical key that helps prevent accidental substitution of types in a given slot. The key fits a specifically shaped spot on the board below the connector. When the module is originally installed, the key fastens onto the backplane center rail. When the module is removed, the key stays in the center rail, requiring the slot to take only identical module types. If the user needs to change the module location in the rack after the key has been attached to the rack, the key can be removed by pushing up and unhooking the latch. The key and module can then be reinserted as needed.
Technical Specifications
| Rated Voltage: | 120 volt AC |
| Number of Inputs: | 32 Inputs (4 Isolated groups of 8) |
| Input Current: | 10 mA |
| Current Required: | 0.35 Amps |
| Freq: | 60 Hz |
| DC Power: | No |
Technical Information
Specifications
|
Rated Voltage: Inputsper Module: |
120 VAC, 47 to 63 Hz Sinusoidal 32 (four groups of eight inputs each) |
|
Isolation: |
1500 volts RMS - any input to backplane 500 volts RMS between input groups |
|
InputCurrent: |
10mA (typical) at rated voltage (reactive) |
|
InputCharacteristics- |
|
|
On-stateVoltage: |
75 to 132 volts AC, 47 to 63 Hz Sinusoidal |
|
Off-state Voltage: |
0 to 25 volts AC, 47 to 63 Hz Sinusoidal |
|
On-stateCurrent: |
6mAto15mA |
|
Off-stateCurrent: |
0 to 3mA (2.2 minimum at 25V input) |
|
Filter Delay Time: |
20mstypical |
|
Current Required from 5VDCbackplanebus: |
0.35amps |
|
VME |
System designed to support the VME standard C.1 |
Troubleshooting
Troubleshooting IC697MDL250
Troubleshooting information is available on IC697MDL250's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC697MDL250
PDF Supply can repair your IC697MDL250 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC697MDL250? Answer: The IC697MDL250 is an 120 Volt AC, 32-Point Input module of the GE Fanuc Series 90-70. This module provides 4 isolated groups of 8 points each.
- Question: The 4 isolated groups of 8 input points allow what to happen? Answer: Because they are isolated, it allows for each group of 8 points to be used on a different phase of the AC supply.
- Question: What are the features of IC697MDL250? Answer:
- 32 points- 4 isolated groups of 8 points
- 20 ms input filter
- proximity switch compatible
- Question: With what are the input characteristics compatible? Answer: They are compatible with a wide range of available proximity switches.
- Question: What do the LED indicators (located at the top of the module) tell you? Answer: They inform you of the status of each point on the logic (PLC) side of the circuit.
- Question: Is configuration of I/O references available on IC697MDL250? Answer: Yes, they are configurable without the use of jumpers or DIP switches.
- Question: Configuration of IC697MDL250 is done through what? Answer: Configuration can be completed through the configuration function of the MS-DOS or Windows programming software.
- Question: What should I do in the event my IC697MDL250 is not working properly? Answer: Your IC697MDL250 may be in need of repair.
For more information on the IC697MDL250 120 Volt AC, 32-Point Input Module of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual.
PDFsupply Tech
The IC697MDL250 is a discrete input module by GE Fanuc and has 32 points comprised of 4 isolated groups. This is superior to the IC697MDL340 which has a total of 16 points.
Common related search terms: DatasheetEmerson, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
