GE / IP FANUC Series 90/30 In Stock
IC697HSC700
SKU 2177247 UPC 0473783641256
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC697HSC700 IC697HSC700AIC697HSC700BIC697HSC700CIC697HSC700-CAIC697HSC700DIC697HSC700EIC697HSC700FIC697HSC700GIC697HSC700HIC697HSC700IIC697HSC700JIC697HSC700KIC697HSC700LIC697HSC700-LTIC697HSC700MIC697HSC700NIC697HSC700OIC697HSC700PIC697HSC700-RR
Common misspellings:
- 1C697HSC700
- IC697HSC7o0
- IC697HSC70o
- IC697HSC700
Product Description
The IC697HSC700 is a High-Speed Counter (HSC) Module designed for the 90-70 series created by GE Fanuc. Features of the high-speed counter module include a single slot, five selectable counter types, 12 single-ended or differential inputs, TTL, non-TTL, and magnetic pickup input thresholds, and four positive logic outputs with LEDs that indicate status. This module also has an external oscillator and built-in +5 VDC output. Configuration is completed via MS-DOS or Windows over Ethernet TCP/IP or the SNP port. The configuration function is already installed on the programming device, which can be a compatible PC.
The IC697HSC700 module processes rapid pulse signals directly (up to 200 KHz or 800 KHz for Type E in A Quad B mode. Functions include the ability to sense inputs, process input count data, and control outputs without requiring communication to the PLC CPU. The module has a straightforward, easy to use PLC interface ideal for industrial applications, including turbine flowmeter, meter proving, velocity measurement, material handling, and motion/process control.
High speed counter types for the IC697HSC700 module include A, B, C, D, and E configurations. The counters all have 12 inputs, four outputs (preset), and PLC ladder interrupt ability (optional). Count rates for types A-D are 200 KHz maximum with the high frequency filter and 30 Hz with the low-frequency filter. The Count, Count Disable, and Preload inputs for each counter can be configured for a high frequency filter (2.5 microseconds) or a low-frequency filter (12.5 milliseconds).
For type E, the maximum count rate with the low-frequency filter (12.5 milliseconds) is 30 Hz; with the high-frequency filter (2.5µs), the maximums are 200 KHz in Up/Down mode and 800 kHz in A Quad B mode. The Count, Count Disable, and Preload inputs for each counter can use either filter, however, the Strobe and Strobe Disable inputs use only the high-frequency filter. See the user manual for more information on type operating features.
Technical Specifications
| Module Type: | High Speed Counter |
| Processing Speed: | 200 KHz |
| Input Voltage Range: | 5 VDC or 10 to 30VDC |
| Output Voltage Range: | 30VDC |
| Input/Output Type: | Positive Logic |
| Power Consumption: | 500mA @ 5VDC |
Technical Information
Specifications
|
General: |
|
|
ModuleOperating Voltage |
5 VDC (from backplane) |
|
ModuleCurrentDrain |
1A + (10 mA x number of ON outputs) + (1.6 x encoder current) |
|
MaximumCountRate Types A - D, and Type E in Up/Down mode |
200 KHz |
|
Type E in A Quad B mode |
800 KHz |
|
OutputPoints |
Powered by user supplied 5V, or 10 to 30 VDC |
|
LEDs |
MODULE OK and O1 - O4 (Output circuit. status) |
|
Input and Output Isolation Peak (1 second) |
1500volts |
|
SteadyStatus |
30 V AC / DC |
|
Inputs VoltageRange TTL Non-TTL MagneticPickup (I1 to I4 only) InputThresholds (I1 to I12) Von Voff Encoder Power
Input FilterDelay IN1 to IN8 IN9 to IN12 Input Impedance Input Hysteresis Input Cable |
5 VDC |
|
10 to 30 VDC |
|
|
400 mV |
|
|
TTL Non-TTL MagneticPickup |
|
|
1.4V 8.0V 400 mV |
|
|
0.8V 5.0V 200 mV |
|
|
5 VDC, 500 mA @40ï‚°C (104ï‚°F), 300 mA @60ï‚°C |
|
|
(140ï‚°F) |
|
|
10 ms or 2 ïsselectable |
|
|
2 ïs |
|
|
6000 ohms |
|
|
250 mV typical |
|
|
Shieldedcablerecommended |
|
|
Maximum length: 30 meters (100 feet) |
|
|
Outputs |
|
|
OutputType |
PositiveLogic,opticallyisolated |
|
MaximumSupplyVoltage |
30.0 VDC |
|
MaximumOutputCurrent at 60ï‚°C (140ï‚°F) |
1.0 A for each output using 10 to 30 VDC supply |
|
OutputCurrent using 5 VDC supply |
20 mA typical |
|
Inductive Load Clamp Voltage |
–8.0 V typical |
|
OFF State Leakage Current |
10 ïA for each output |
Troubleshooting
Troubleshooting IC697HSC700
Troubleshooting information is available on IC697HSC700's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC697HSC700
PDF Supply can repair your IC697HSC700 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC697HSC700? Answer: The IC697HSC700 is a High Speed Counter from the GE Fanuc 90-70 Series.
- Question: What does IC697HSC700 do? Answer: IC697HSC700 directly processes rapid pulse signals up to 200 KHz (800 KHz for Type E in A Quad B mode).
- Question: What are some of the Coming Soon... functions of this High Speed Counter? Answer: IC697HSC700 can sense inputs, process input count data, and control its outputs without communicating with the PLC CPU.
- Question: Because IC697HSC700 has a simple and user-friendly PLC interface, in what types of industrial applications does it make it extremely useful? Answer:
- Turbine flowmeter
- Meter proving
- Velocity measurement
- Material handling
- Motion control
- Process control
- Question: Configuration of IC697HSC700 is done through what? Answer: Configuration of this High Speed Counter can be completed through the configuration function of the MS-DOS or Windows programming software running on Windows 95 or Windows NT over Ethernet TCP/IP or through the SNP port.
- Question: What are some of the features of IC697HSC700? Answer:
- Single slot module
- 5 selectable counter types
- 12 single-ended or differential inputs
- TTL, non-TTL, and magnetic pickup input thresholds
- 4 positive logic (source) outputs with LED indicators
- External oscillator
- Built-in +5 VDC output
- Software configuration
- Internal module diagnostics
- Module OK and output state LEDs
- Removable terminal strip for field wiring connections
- Question: What should I do if my IC697HSC700 is not functioning properly? Answer: Your IC697HSC700 may need repair.
For more information on the IC697HSC700 High Speed Counter of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual.
Common related search terms: ConfigurationDatasheet, Emerson, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
