GE / IP FANUC Series 90/30 In Stock
Home » GE Fanuc Emerson » Series 90-70 » IC697CPU780 » You are here: IC697CPU780J
IC697CPU780J
SKU 2177439 UPC 0799705792739
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
Product Description
Made by GE Automation and Controls, the IC697CPU780 is a single-slot PLC CPU capable of controlling machinery and processes in real-time. Communication with I/O and “smart option” modules is accomplished via a rack-mounted connection backplane. To control and operate this PLC, use the built-in control switch or connect the device to a computer.
The IC697CPU780 has a 16MHz 80386DX microprocessor which can support floating point calculations every 0.4 microseconds. Up to 8K analog I/O is supported, along with various mixes of 12K inputs and outputs. This device supports several modules, including the following: IC697 LAN interface modules, bus controllers for IC660 and IC661, and discrete and analog IC697 I/O modules.
The IC697CPU780 also supports Hot Standby redundancy applications. A variety of redundancy features are also included such as CPU synchronization, “bumpless switching,” 20ms scan extension, and no single point of failure.
Up to 512 kilobytes of user and program memory is provided by an expansion board. Memory is maintained by a CMOS battery. The memory expansion board also supports up to 256 kilobytes of flash memory (NVRAM). Error checking is provided by a checksum routine with parity detection.
The IC697CPU780 is configured by IC641 software running from an attached MS-DOS programmer computer. There are no DIP switches or jumpers required to program this device. To connect the device to the programmer computer, use either a serial or parallel connection. To protect configuration settings, use either the built-in memory protection switch or a software password.
Follow the guidelines in the product’s manual during installation. Disable power to the rack. Put the control switch into the stop position. Put the memory protection switch into the off position. Connect the memory board to the device. Put the CMOS battery into one of the on-board battery slots. Install the device into the first slot of the rack and enable power to the rack.
Technical Specifications
| Module Type: | Hot Standby CPU |
| Number of Slots: | 1 (Single slot) |
| Current Required: | 1.6 Amps |
| Number of Points: | 12K inputs and outputs (any mix) |
| Serial Ports: | One |
| Supports: | IC660/IC661 I/O and IC697 I/O |
Ethernet TCP/IP - The new Ethernet Global Data (EGD) is designed for applications requiring high-speed networking and coordination. It provides configurable periodic exchanges among networked control nodes, with no programming required. EGD is up to 10 times more efficient on bandwidth than the normal polling system.
Common related search terms: Battery, Configuration, Datasheet, Emerson, Firmware, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
You May Also Need
Your Item was added to your shopping cart!
Free Ground Shipping*
US continental orders placed Monday-Friday before 4:00pm EST! Free Ground delivery available on all orders.
Adding Items to Cart
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.