GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

Mon-Fri 8AM-5PM EST

IC697CPU771E

Rated 4.7/5 Based on 14 ratings.

Rate your purchase of the IC697CPU771

Loading...

SKU 2176147  UPC 0799705794900

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description


Manufactured by GE Automation and Controls, the IC697CPU771 is a single-slot, Expandable Programmable Logic Controller CPU capable of controlling industrial machinery and processes in real-time.
To communicate with I/O and “smart option” modules, a rack-mounted backplane is used.

 

The IC697CPU771 has a 12MHz 80C186 microprocessor capable of 0.4 microseconds per Boolean function. This device supports up to 8K analog I/O and any mixture of 2K I/O. This device also supports a variety of smart option modules, including IC697 LAN Interface modules, coprocessor modules, communications modules, IC660 and IC661 bus controller I/O modules, and discrete and analog IC697 I/O modules.

 

The IC697CPU771 is configured by MS-DOS or by software programs running from either Windows 95 or Windows NT operating systems. Neither DIP switches nor jumpers are used for device programming. Connect the device to a computer running the previously mentioned software by means of a serial, parallel, or Ethernet interface. For security, device configuration is password-protected.

 

The IC697CPU771 requires a memory expansion board to store user and program data. This expansion board is capable of holding up to 512 kilobytes of memory. Memory is maintained by an on-board CMOS battery. Initialization of the CPU by an attached programmer computer is required when installing the memory expansion board.

 

Operation of this device is accomplished with either a three-position control switch or by a computer running the appropriate software. For precise installation and safety guidelines, see the product manual. Ensure that rack power is disconnected before installing. The three-position switch must be in the stop position. Connect the memory expansion board. The CMOS battery may be inserted into either of the battery connection slots. Then insert the device into slot one of the rack. Reconnect power to the rack. The device is now ready to program.

Technical Specifications


Module Type: Expandable Central Processing Unit
Number of Slots: 1 (Single slot)
Current Required: 1.1 Amps
Number of Points:    2K inputs and outputs (any mix)
Serial Ports: One
Supports: IC660/IC661 I/O and IC697 I/O

 

 
In Stock! CPU without Floating Pt IC697C IC697CP IC697CPU

Rack I/O - The Series 90-70 PLC offers a full range of VME-based Series 90-70 rack I/O and specialty modules. Up to 8 VME (Series 90-70) racks may be configured as local (within 50 feet), same ground I/O, or racks may be remote and accessed over Genius LAN.
ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: BatteryConfigurationDatasheetEmersonFirmwareManualPDFPLCPriceRepairSpecificationTroubleshootUser-ManualWiring

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.