1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC697CPM925-CC

★★★★★Rated 4.5/5 Based on 18 ratings.

Rate your purchase of the IC697CPM925

SKU 2175233  UPC 0799705794931

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description


Produced by GE Automation, the IC697CPM925 is a single-slot PLC CPU capable of controlling industrial machinery in real-time. Communication with I/O and “smart option” modules is accomplished via a rack-mounted connection backplane. This device is configured by MS-DOS or by software applications running on legacy operating systems including Windows 95 and Windows NT. The IC697CPM925 has a 64MHz 80486DX2 microprocessor capable of floating point decimal calculations as fast as 0.4 microseconds per Boolean function. This device supports up to 8K analog I/O and any mixture of 12K inputs and outputs.

The IC697CPM925 offers support for the following modules: discrete and analog I/O modules from the IC697 family, IC660 and IC661 I/O modules, and multiple coprocessor and communications modules. This device allows for up to one megabyte or user memory, which is maintained by an on-board lithium CMOS battery, as is the device’s calendar and clock. Operating system firmware is housed in flash memory. Note: Flash memory is not capable of storing user information. The user is not required to disassemble the device or replace EPROM to update firmware. To update firmware, connect the device to a compatible computer, insert the firmware floppy disk, and run the appropriate Loader software.

To operate the IC697CPM925, use either the three-position RUN/STOP switch or attach a programmer and use programming software. Device configuration is possible by way of serial, parallel, or Ethernet interface. Device configuration is secured via passwords or a manual memory protect keyswitch. When using the memory protect keyswitch, be sure to use a parallel connected programmer linked to the Bus Transmitter module. To prevent overheating, a fan capable of 70 cubic feet per minute (CFM) is required. Installation instructions are provided in the device manual. Rack power should be off before installation is attempted. The memory protect keyswitch should be OFF, and the toggle switch must be in the STOP position. Battery connection is possible on either connector. Connect the device to slot 1. Then power on the device.

Technical Specifications

Module Type: Floating Point CPU
Number of Slots: 1 (Single slot)
Current Required: 3.3 Amps nominal
Number of Points:    12K inputs and outputs (any mix)
Serial Ports: One
Supports: IC660/IC661 I/O and IC697 I/O

 

 
In Stock! CPU Processor Unit Faster IC697C IC697CP IC697CPM

If your application requirements go beyond the simplex, the new hot-standby redundancy models now support dual Genius¨ LANs for no single point of failure, and scan synchronized CPUs for bumpless transfer of control.
ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: Battery, Configuration, Datasheet, Emerson, Firmware, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring, 

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.