GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

Mon-Fri 8AM-5PM EST

IC697CPM915-AA

Rated 4.5/5 Based on 8 ratings.

Rate your purchase of the IC697CPM915

Loading...

SKU 2170010  UPC 0799705794962

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description



The IC697CPM915 is a 32 MHz, 32-Bit, Floating Point Central Processing Unit in the 90-70 Series manufactured by GE Fanuc.
 This CPU is programmed by MS-DOS or Windows software to conduct control of machines, processes, and material handling in real time. It communicates with I/O and smart option modules over a rack mounted backplane. 
Select features include a single slot CPU, 1 MB of same slot battery-backed memory, 12K mixed inputs and outputs, up to 8K analog I/O, and configurable data/program memory. The IC697CPM915 supports floating point calculations and performs at 0.4 microseconds per Boolean function.

A variety of option modules are supported, including all IC697 LAN interface modules, a number of co-processor modules, IC660/661 bus controllers, and discrete/analog I/O modules in the IC697 family.  IC697CPM915 stores operating system firmware via flash memory; however, storage of user program is not supported by this module. Firmware is updated without any need for disassembly or EPROM replacement. Firmware updates are conducted by connecting a compatible PC to the serial port and running Loader software provided.

This module can be operated by controlling the three-position RUN / STOP switch or by a remote attached programmer and corresponding software. Program/Configuration data is locked via password or manually using the keyswitch. If the key is “protected,” data can only be adjusted by a programmer linked parallel only to the BTM (bus transmitter module). Four green LEDs on the front of the module display CPU status.  IC697CPM915 should be properly installed using the manual provided. The battery can be connected to either connector. The toggle switch should be in the STOP position and the keyswitch in Memory Protection OFF position. Rack power should also be off. Then the module can be installed in slot 1 and power initiated.


Technical Specifications


Module Type: Floating Point CPU 
Number of Slots: 1 (Single slot)
Number of Points:   12K inputs and outputs (any mix)
Supports: IC660/IC661 I/O and IC697 I/O
Serial Ports: One
Current required: 2.8 Amps nominal

 

 
In Stock! Central Processing Unit IC697C IC697CP IC697CPM

If your application demands top performance, uses large or complex algorithms, or needs hot-stand-by or triple modular redundancy (TMR), then the Series 90-70 PLC was designed for you.
ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: BatteryConfigurationDatasheetEmersonFirmwareManualPDFPLCPriceRepairSpecificationTroubleshootUser-ManualWiring

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.