GE / IP FANUC Series 90/30 In Stock
IC697CHS750
SKU 2174234 UPC 0799705795051
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC697CHS750 IC697CHS750AIC697CHS750BIC697CHS750CIC697CHS750-CAIC697CHS750DIC697CHS750EIC697CHS750FIC697CHS750GIC697CHS750HIC697CHS750IIC697CHS750JIC697CHS750KIC697CHS750LIC697CHS750-LTIC697CHS750MIC697CHS750NIC697CHS750OIC697CHS750PIC697CHS750QIC697CHS750RIC697CHS750-RRIC697CHS750S
Common misspellings:
- 1C697CHS750
- IC697CHS75o
- IC697CHS750
Product Description
The IC697CHS750 is a 5-Slot Rear Mount I/O Rack by GE Fanuc for the series 90-70 PLCs. It is a rack used to connect with modules that belong to the IC697 PLC series. Racks with the same characteristics as this one are IC697CHS790 and IC697CHS791. The difference between them is the number of slots and the mounting orientation. To power this rack, there are different types of AC or DC IC697 power supplies. In some cases, a single power supply can be used for two racks with a power extension cable. The rack’s size is 11.15’’x 19’’x 7.5’’ but the space needed for mounting the rack should be larger to ensure adequate air flow.
To power the IC697CHS750, use the top left slot to connect the power supply. On both the right and the left sides of the panel, there are ground studs. When installing the rack, some space must be empty to provide access. More space is required to connect two racks with the same power supply. Around 6 inches is adequate. There is also an optional VME J2 Backplane Kit that can be helpful when installing the rack.
The IC697CHS750 rack is compatible with high-density modules of the IC697 series. The wires that connect to these modules enter the rack through the bottom cavity, which can provide space for up to forty #14 wires. To program the I/O point references of the modules, the MS-DOS programming software configurator function can allow the user to configure the equipment without the need to access jumpers or DIP switches.
Technical Specifications
| Module Type: | Standard Rack |
| Mounting Location: | Rear(panel) |
| Number of Slots: | 5 (plus power supply) |
| Type: | Double width |
| Dimensions: | 11.15 x 12.60 x 7.5 in. (H x W x D) |
| Internal Power Used: | 20 amps @ 5 VDC |
Technical Information
Specifications
|
Number of Slots |
5 or 9, plus power supply slot |
|
Maximum 5 Volt Current |
20 amps (100 watt 120/240 VAC or 125 VDC power supply) 11 amps (55 watt 120/240 VAC or 125 VDC power supply) 18 amps (90 watt 24 VDC power supply) 18 amps (90 watt 48 VDC power supply) |
|
Current Required from I/O Bus |
0.5 amps |
|
I/O References |
User configurable without the use of module jumpers or DIP switches. |
|
Rack Identification |
Four jumpers behind rack power supply |
|
Dimensions Nine Slot Rack |
Height Width Depth 11.15” 19.00” 7.5” 283mm 483mm 190mm |
|
Five Slot Rack |
11.15” 12.6” 7.5” 283mm 320mm 190mm All modules for the IC697 I/O system extend 1.7” (43mm) beyond the front of the rack. |
|
VME |
System designed to support the VME standard C.1 |
*Refer to GFK-0867B, or later for product standards and general specifications.
Troubleshooting
Troubleshooting IC697CHS750
Troubleshooting information is available on IC697CHS750's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC697CHS750
PDF Supply can repair your IC697CHS750 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC697CHS750? Answer: The IC697CHS750 is a Five Slot, Rear Mount Rack from the GE Fanuc 90-70 Series.
- Question: For what is IC697CHS750 used? Answer: This standard rack is used for all the CPU and I/O configurations.
- Question: How many modules can this rack hold? Answer: IC697CHS750 is made to hold a power supply in the leftmost module position and has 5 additional slot locations.
- Question: What are the dimensions of IC697CHS750? Answer: 11.15" H x 12.60" W x 7.5" D (283mm x 320mm x 190mm)
- Question: How wide are the slots? Answer: The slots are 1.6" wide except the power supply is 2.4" wide.
- Question: What are some of the features of IC697CHS750? Answer:
- Accepts all IC697 PLC module types
- Rear mount racks mount in a 10" (254mm) deep enclosure (fans normally not required)
- Accepts plug-in AC or DC IC697 power supply
- Provision for 2 rack operation from single power supply
- Question: What should I do if my IC697CHS750 breaks or is not working how it should? Answer: Your IC697CHS750 may need repair.
For more information on the IC697CHS750 Five Slot, Rear Mount Rack of the GE Fanuc 90-70 Series, please see the Datasheet User-Manual.
Common related search terms: ConfigurationDatasheet, Dimension, Emerson, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
