1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC697BEM763N

★★★★★Rated 4.5/5 Based on 7 ratings.

Rate your purchase of the IC697BEM763

SKU 2171467  UPC 0799705795099

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description


IC697BEM763 is a high-performance interface module for the 90-70 series designed by GE Fanuc.  This part provides automation between series 90-70 PLC systems and GE Drive Systems DLAN / DLAN+ LAN protocols. The IC697BEM763 module allows drives such as AC2000, DC300, and DC2000 to be controlled from series 90-70 programs. The GE Drive system only communicates using DLAN or DLAN+ local area network protocols.

The IC697BEM763 module operates either as a DLAN or DLAN+ controller. It is important to note that a single module cannot be both a DLAN and DLAN+ controller at the same time. In a situation where the application requires both DLAN and DLAN+ devices, two DLAN Interface modules must be used. In a single rack system, the IC697BEM763 module resides in the same rack as the PLC processor. In a multiple rack system, the IC697BEM763 module can reside either in the central processing unit rack or in the expansion racks.

During installation, the CPU power supply unit and the IC697BEM763 module must reside in designated slots within each rack. The CPU module must reside in slot 1 of rack 0. When the IC697BEM763 module system includes a BTM, it can be allocated in any slot as long as it is not on the right side of an empty slot. If the PLC system has more than one rack, the IC697BEM763 module must be located in slot 1 of each expansion slot. Note: IC697BEM763A must be installed on the right side of all the other GE Fanuc modules. There can be no empty slots between the IC697BEM763A and the CPU module.

IC697BEM763 modules can be placed in any unused slot in the appropriate rack. However, all of the slots between the IC697BEM763 module and the PLC CPU must be occupied. If any of these slots are empty, the IC697BEM763 module cannot communicate across the backplane to the PLC CPU.

In Stock! DLAN Drive Interface IC697B IC697BE IC697BEM

Serial - Each new CPX model CPU has three on-board serial ports for simultaneous connection of a programmer device, an operator interface or OI device, and any other Series Ninety Protocol (SNP) device. If additional serial ports are needed, co-processor modules are available which support Modbusª RTU, CCM, SNP, or user defined protocol using MegaBasic¨ or C.
ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: Configuration, Datasheet, Emerson, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring, 

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.