GE / IP FANUC Series 90/30 In Stock
Home » GE Fanuc Emerson » Series 90-30 » IC695FTB001 » You are here: IC695FTB001-Emerson
IC695FTB001-Emerson
SKU 2173149 UPC 00
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The IC695FTB001 provides an active fiber interface that extends the I/O capability of the IC695PMM335 PACMotion Multi-Acis Motion Controller. The FTB provides a broad range of configurable I/) for the axes on the PMM335, supporting extensive distributed, configurable digital and analog I/O for complex machines.
The FTB allows motion-centric I/O to be distributed up to 100 meters from the RX3i rack. Servo amplifiers and motion I/O can be distributed with up to 100 meters between nodes, allowing 400 meters maximum from the controller.
In addition to simple I/O, FTB I/O is configurable for motion-specific functionality such as Touch Probe inputs, Over Travel Limit switches, Home switches, and A Quad B Encoder and Marker inputs.
The Horner APG +/-10V Isolated Analog Input Modules provide four analog input channels with 14-bits of resolution. The isolation levels for this unit are channel-to-channel and channel-to-ground. This module converts voltage input signals to digital values (-32,000 to +32,000), which are placed directly into the %AI table of the PLC CPU. Each of the four channels of the module has a programmable setpoint (the level of which is set in the PLC program via four %AQ output registers). When the analog input value reaches or exceeds the setpoint, a corresponding digital input %I is energized. The first four %Is represent the four input channel setpoint alarms respectively.
Technical Specifications
| Steady-State Power Consumption | ADC405: .4W / 80mA @ 5V, 2.16W / 90mA @ 24V ADC410: .7W / 140mA @ 5V, 1.2W / 50mA @ 24V |
| Power Requirements | 19.2VDC - 28.8VDC; 0.45 Amps @ 24V |
| 24V Outputs | 8 optical isolated; source; open load & short detection |
| 24V General Purpose | 16 optically isolated; source/sink |
| 5V Inputs / Outputs | 4 |
| 5V | 8 (6 differential/single-ended; 2 differential) |
| Analog Inputs | 2 +/- 10V differential |
| Analog Outputs | 2 +/- 10V single-ended |
| 24V Power Output | |
| 5V Power Output | 0.5 amp max. |
| Quad Encoder Open Circuit Detection | Yes |
| I/O Function Assignment | Configurable |
The Fiber I/O Terminal Block (FTB) provides an active fiber interface that extends the I/O capability of the IC695PMM335 PACMotion Multi-Axis Motion Controller. The FTB provides a broad range of configurable I/O for the axes on the PMM335, supporting extensive distributed, configurable digital and analog I/O for complex machines.
Common related search terms: Emerson,
Your Item was added to your shopping cart!
Free Ground Shipping*
US continental orders placed Monday-Friday before 4:00pm EST! Free Ground delivery available on all orders.
Adding Items to Cart
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.