1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC693PWR332RR

★★★★★Rated 4.5/5 Based on 6 ratings.

Rate your purchase of the IC693PWR332

SKU 2176238  UPC 0799705798564

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description

The IC693PWR332 is a High Capacity Power Supply for GE Fanuc series 90-30 PLCs. Its power is 30 Watts and is designed for wide range supply. Its nominal input is 12 VDC, but the actual input can vary from 9.6 to 15 VDC. Instead of a single output, it has three different outputs: one +5VDC for CPU inputs or outputs, one +24V Relay output for output relay modules, and an isolated +24VDC supply for internal or external use in modules.

The user terminal strip of the IC693PWR332 High Capacity Power Supply include DC input, ground, and a +24 VDC output. DC input power is connected at the top of supply’s terminal strip. There is system ground for overvoltage protection and +24 VDC output for I/O modules. The power supply also deploys a CPU RS-485 serial port for a computer, handheld programmer, or serial device. Backplane or internal connections include +24 VDC isolated and relay connections, a +5VDC connection, and ground.   

To determine the exact input power for the IC693PWR332 High Capacity Power Supply, a series of steps must be followed. First examine the input power needed by all modules in their specifications. Add those together and multiply the total by 1.5. This number is the total of the input power needed. To find the current’s input value, divide the input power by the voltage of the source power. If voltage is less, current will be more; however, everything will work with only a 10 to 20 percent alteration in current and voltage.

The IC693PWR332 High Capacity Power Supply has four LEDs. The PWR labeled LED has a green light when a correct power supply is connected. If the green light is not on, power supply is faulty or not connected. The second LED has the label OK, which is also green when the PLC is working properly. The third LED named RUN indicates that the PLC is in RUN mode. The last LED, named BATT, turns red when the backup lithium battery of the PLC is too low and will result in data loss if power is lost. The battery ensures the contents are maintained. The battery can be changed when power is on by removing the plastic cover at the bottom of the Power Supply faceplate. Normally, the battery LED is off.     
 

Technical Specifications

Nominal Rated Voltage:  12 volts DC
Input Voltage Range: 9.6 to 15 volts DC
Input Power: 50 W at full power
Load Capacity: 30 Watts
Location on Baseplates:   Leftmost Slot
Communication: RS 485 Serial Port

 

Power Supply, 12 Vdc, High Capacity IC693P IC693PW IC693PWR
ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: Battery, Buy, Datasheet, Emerson, Manual, Price, Repair, Specification, Troubleshoot, Wiring, 

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.