1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC693PWR328-Datasheet

★★★★★Rated 5/5 Based on 2 ratings.

Rate your purchase of the IC693PWR328

SKU 2177426  UPC 0799705798595

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description

 
GE Automation and Controls is the manufacturer of IC693PWR328. It acts as the power supply for the 90-30 Series PLC. It gives a power output of 30 watts for a nominal input of 48 Volts DC input voltage. The voltage range varies from 38 volts DC up to 56 Volts DC. This power supply provides the power outputs which include +5 Volts DC output, +24 Volts DC power output for relay modules, and +24 Volts DC output for isolated modules. The threshold for the combined total of every outputis 30 watts.
 
The user should consider some important specifications before configuring IC693PWR328. The user should keep a nominal voltage of 48 Volts DC for a range of input Voltage from 38 Volts DC to 56 Volts DC. The user should keep maximum of 50 watts input power at full load. The user can keep output power for 5 Volts DC maximum at 15 watts, 24 Volts DC Relay output maximum at 15 watts, and then 24 Volts DC isolated output at maximum 20 watts. The output voltage for 5 Volts DC is 5.0 to 5.2 Volts DC (5.1 Volts DC nominal). For 24 Volts DC Relay it is 24 Volts DC to 28 Volts DC, and for 24 Volts DC isolated it is 21.5 to 28 Volts DC. The protective limits for overvoltage and overcurrent for 5 Volts DC are 6.4V to 7V and 4A maximum respectively, with a holdup time of 14ms minimum. The power and current input calculations for the power supply use the least input voltage for determining the highest input current and allow a 10-20% margin for variations.
 

Technical Specifications

Nominal Rated Voltage: 48 volts DC
Input Voltage Range: 38 to 56 volts DC
Input Power: 50 W at full power
Load Capacity: 30 Watts
Location on Baseplates:   Leftmost Slot
Communication: RS 485 Serial Port

 

Power Supply, 48 Vdc IC693P IC693PW IC693PWR
ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: Battery, Buy, Datasheet, Emerson, Manual, Price, Repair, Specification, Troubleshoot, Wiring, 

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.