GE / IP FANUC Series 90/30 In Stock
IC693PWR321
SKU 2170345 UPC 0658521788435
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC693PWR321 IC693PWR321-AAIC693PWR321AIC693PWR321BIC693PWR321CIC693PWR321-CAIC693PWR321DIC693PWR321EIC693PWR321FIC693PWR321GIC693PWR321HIC693PWR321JIC693PWR321KIC693PWR321LIC693PWR321-LTIC693PWR321MIC693PWR321NIC693PWR321PIC693PWR321QIC693PWR321RIC693PWR321-RRIC693PWR321SIC693PWR321TIC693PWR321UIC693PWR321VIC693PWR321WIC693PWR321XIC693PWR321YIC693PWR321Z
Common misspellings:
- 1C693PWR321
- IC693PWR32l
- IC693PWR321
Technical Specifications for IC693PWR321
| Manufacturer | GE Fanuc |
|---|---|
| Series | Series 90-30 |
| Part Number | IC693PWR321 |
| Product Type | Power Supply Module |
| Voltage | 85-264V AC, 100-300V DC |
| Inrush Current | 4 Amps peak at 250 ms |
| Communication | RS-485 Port |
| Power | 30 W |
| Installation | Leftmost slot of the baseplate |
| Isolated Voltage Supply | 24V DC |
Product Description
The GE Fanuc IC693PWR321 is a standard power supply. This unit is a 30 watt supply that can use direct or alternating current. It operates on an input voltage of either 120/240 VAC or 125 VDC. Aside from a +5VDC output, this power supply can provide two +24 VDC outputs. One is a relay power output, which is used to power circuits on Series 90-30 Output Relay modules. The other is an isolated output, which is used internally by some modules. It can also provide external power for 24 VDC Input modules.
Just like I/O modules, this power supply is easily compatible with the Series 90-30 system and works with any CPU model. There is a limiting feature on the power supply that protects the hardware by shutting the power off if there is a direct short. The IC693PWR321 has six terminals for user connections. Like all Series 90-30 power supplies, this model is connected to the CPU performance. This enables simplex, fail-safe, and fault tolerance capabilities. The power supply also has advanced diagnostics as well as built-in smart switch fusing. This makes for high-performance and increased safety when using the unit.
Technical Specifications
| Nominal Rated Voltage: | 120/240 VAC or 125 VDC |
| Input Voltage Range: | 85 to 264 VAC or 100 to 300 VDC |
| Input Power: | 90 VA with VAC or 50 W with VDC |
| Load Capacity: | 30 Watts |
| Location on Baseplates: | Leftmost Slot |
| Communication: | RS 485 Serial Port |
The GE Fanuc IC693PWR321 power supply module is well matched with different CPU modules. It is listed and certified for compliance with the CE and cULus industrial standards. This unit is specially designed and intended to operate in the Class One, Division Two rated environments. The IC693PWR321 power supply features a power supply controlling functionality which protects the hardware in case of a direct short. It comes with 6 terminals that are used for user connections. Additionally, this power supply has improved diagnostics features which help in tracking all the updates and events for the users. It features an RS-485 serial port for communication purposes.
Technical Information
Specifications
|
Nominal Rated Voltage Input Voltage Range AC DC |
120/240 VAC or 125 VDC
85 to 264 VAC 100 to 300 VDC |
|
Input Power (Maximum with Full Load) Inrush Current |
90 VA with VAC Input 50 W with VDC Input 4A peak, 250 milliseconds maximum |
|
Output Power |
5 VDC and 24 VDC Relay: 15 watts maximum 24 VDC Relay: 15 watts maximum 24 VDC Isolated: 20 watts maximum NOTE: 30 watts maximum total (all three outputs) |
|
Output Voltage |
5 VDC: 5.0 VDC to 5.2 VDC (5.1 VDC nominal) Relay 24 VDC: 24 to 28 VDC Isolated 24 VDC: 21.5 VDC to 28 VDC |
|
Protective Limits Overvoltage: Overcurrent: |
5 VDC output: 6.4 to 7 V 5 VDC output: 4 A maximum |
|
Holdup Time: |
20 milliseconds minimum |
Troubleshooting
Troubleshooting IC693PWR321
Troubleshooting information is available on IC693PWR321’s website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC693PWR321
PDF Supply can repair your IC693PWR321 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Selecting the Appropriate Power Supply with CPU374
Description
CPU374 is compatible with any 90-30 power supplies, except Rev A through J, Rev W and Rev X of Power Supply IC693PWR321. If an IC693PWR321 supply is used, it must be Rev K through V, or Rev Y or later
Resolution
If Release 11.01 or later CPU374 is used with Rev X or W of PWR321, it will always powerup in a cleared state - logic, configuration, stored values, fault tables are all cleared or lost.
A high cap power supply PWR330 is strongly recommended.
Finally, CPU374 consumes 1.48A @ 5VDC approx 7.4 watts.
Customer Questions and Answers
- Question: What is an IC693PWR321? Answer: The IC693PWR321 is a Standard Power Supply. This module is a 30 watt supply that can operate from an input voltage source in the range of 85 to 264 VAC or 100 to 300 VDC. The specifications for this product are on IC693PWR321's website page.
- Question: How many outputs does this power supply provide? Answer: The IC693PWR321 provides 3 outputs.
- Question: What are those outputs? Answer:
- +5 VDC output
- +24 VDC "Relay" power output, which provides power to circuits on Series 90-30 Output Relay modules.
- "Isolated" +24 VDC, which is used internally by some modules and can also be used to provide external power for 24 VDC Input modules.
- Question: What is the load capacity for IC693PWR321? Answer: 30 watts
- Question: What is the nominal input for IC693PWR321? Answer: 100 to 240 VAC or 125 VDC
- Question: Where should the power supplies be installed? Answer: Power supplies must be installed in the leftmost slot in all baseplates.
- Question: How many terminals does this power supply have? Answer: In previous versions of this power supply, it had 5 terminals on the terminal block. The new version has six terminals (It is functionally the same.). The change was made to conform to European EC requirements.
- Question: What does it mean when the OK light is green? Answer: It is referring to the CPU. If the OK light is green it means that the CPU has reported back that it is in a fully functional mode.
- Question: How can I tell if my IC693PWR321 is not working? Answer: If your PWR or OK light is not on, if the power supply is excessively loud, if the PS PORT is not blinking, or if your RUN light does not come on when you have the module running then your product may need repair.
For more information on the IC693PWR321 Standard Power Supply Module of the GE 90-30 Series, please see the Datasheet Manual.
PDFsupply Tech
The power supply also has advanced diagnostics as well as built-in smart switch fusing.
PDFsupply Tech
this power supply is easily compatible with the Series 90-30 system and works with any CPU model
PDFsupply Tech
The power supply also has advanced diagnostics as well as built-in smart switch fusing.
PDFsupply Tech
this power supply is easily compatible with the Series 90-30 system and works with any CPU model
Common related search terms: BatteryBuy, Datasheet, Emerson, Manual, Price, Repair, Specification, Troubleshoot, Wiring,
