1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC693MDL760-Emerson

★★★★★Rated 4.5/5 Based on 16 ratings.

Rate your purchase of the IC693MDL760

GE Fanuc PLC - Series 90-30 - IC693MDL760

SKU 0  UPC 0799705802827

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description

The GE Fanuc IC693MDL760 is a solenoid valve output module. This unit has eleven pneumatic outputs and five 24VDC sourcing outputs. For each of the pneumatic outputs, the module contains an internal 3- way solenoid-actuated valve and an associated output fitting. The fittings are located on the front panel.  The module is enclosed in a standard IC693 plastic housing. When the user switches the output on, the internal valve connects a pressure source to the output fitting. This pressure source is supplied by the user and can have a maximum pressure of 100 psi. It is connected to the fitting on the bottom of the output module.  The valve has an output port, which is vented inside the module whenever the output is switched off.

The unit can be hooked up to an external 24VDC source to provide solenoid power. On the front panel of the module, there is a 12-pin connector. This enables the user to connect the Solenoid Forcing Pendent. The five outputs on this output module can each drive a maximum current of 0.5A. The maximum cumulative total for all five points is 2.0A. There is also a 10-pin connector on the front panel, enabling field wiring to be connected to the output points. In order to power the positive logic outputs that source current to the field connections, the user must provide 24VDC power.   Although the five output points are electrically isolated from the PLC backplane, they are not individually isolated from each other. This device should be configured by its catalog number when using VersaPro programming software version 2.0 or later. Otherwise, the module must be configured like a standard 16-point generic output module.

Technical Specifications

Rated Voltage: 24 volts DC
# of Outputs: 5 (DC), 11 (pneumatic)
Supply Pressure: 100 psi max.
Output Current:  0.5 A @ 30VDC per point
Output Voltage Range:   18 to 30VDC
Power Consumption: 75 mA from 5V bus

 

 

Part Number: IC693MDL760 / ic693mdl760
Mfr/Brand Name: GE Automation
Mfr Number: IC693MDL760 / ic693mdl760
Type: Solenoid Value Output Module

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: Buy, Datasheet, Emerson, Manual, Price, Repair, Specification, Troubleshoot, Wiring, 

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.