1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC693MDL751-Manual

★★★★★Rated 4.6/5 Based on 11 ratings.

Rate your purchase of the IC693MDL751

IC693MDL751 12/24 Volts dc Output, Positive Logic (32) IC693M IC693MD IC693MDL PDFsupply also repair

SKU 2176229  UPC 0753400909281

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description

The IC693MDL751 output module is manufactured by GE Fanuc and belongs to the 90-30 series of Programmable Logic Controllers. The module consists of 32 outputs in groups of 4. This therefore implies that each group has 8 outputs. It has a voltage rating of 12/24V DC and delivers between 12 to 24 V DC and a maximum current of 0.3 Amps per point. The output device is connected between the negative power bus and the module output. The output properties of the module are compatible with a wide range of load devices including solenoids, indicators and motor starters. The characteristics include output voltage of 0.24 V maximum, off stage leakage of 0.1 mA maximum and finally a maximum ON & OFF response time of 2 ms. It’s worth noting that power for operation of field devices must be supplied by the user. A 50-pin connector is used to make connections between output circuits and the user’s output devices.

The IC693MDL751 output module is installable on any Input / Output slot of a 5 or 10-slot baseplate in the 90-30 Series PLC. The two options for field writing are the direct method or using a Weidmuller terminal block. Direct method makes use of cables that bear a female connector on the module end and have stripped or tinned wires on the other opposite end. You can fabricate or build your own cable. Alternatively, a pre- wired can be procured with either catalog number IC693CBL308 with a length of 3 feet, the equivalent of 1 meter or number IC693CBL309 which is twice the length (6 feet / 2 meters). On the other hand, a Weidmuller terminal block #912263 can be used with a GE Fanuc pre-wired cable. Ge Fanuc cables no. C693CBL306 with a length of 3 feet, (1meter) or IC693CBL307 with a length of 6 feet (2 meters) have connectors on each end. These connections join the connector module to a connector on the Din rail which is mounted on the Weidmuller terminal block.

Technical Specifications

Rated Voltage: 12/24 volts DC
# of Outputs: 32
Freq: n/a
Output Current: 0.3 A per point
Output Voltage Range:   12 to 24 volts DC (+20%, -15%)
DC Power: Yes

 

12/24 Volts dc Output, Positive Logic (32) IC693M IC693MD IC693MDL
ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: Buy, Datasheet, Emerson, Manual, Price, Repair, Specification, Troubleshoot, Wiring, 

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.