GE / IP FANUC Series 90/30 In Stock
IC693MDL734
SKU 2177416 UPC 0925248915384
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC693MDL734 IC693MDL734AIC693MDL734BIC693MDL734CIC693MDL734-CAIC693MDL734DIC693MDL734-LTIC693MDL734-RR
Common misspellings:
- 1C693MDL734
- IC693MD1734
- IC693MDL73A
- IC693MDL734
Product Description
The IC693MDL734 is a 125 Volts DC with Positive Logic/Negative Logic and 1 Ampere Output module which is a component of the Series 90-30 Programmable Logic Controllers manufactured by GE Fanuc Automation. This module offers 6 isolated point outputs with power output terminals. The dual characteristic of this design provides the user with the option to either use positive logic, where current sources from the common user or positive powered terminal bus, or a negative logic, where current sinks from the common user loads or negative powered terminal bus. With both positive and negative logic options, the module is compatible with a variety of output devices. The devices on field operate on a compatible user-supplied power source.
In order to communicate the ON/OFF state of each output circuit, every point has a corresponding LED indicator. All of these LED indicators are situated on the top surface of the module. The LED lights are organized in two rows. The six ON/OFF state indicators are green and in the first row, labelled A1 through A6. The circuit wiring is located on the inside surface of the module door panel, whereas the information for identifying the voltage type is present on the other side. The IC693MDL734 is high-voltage module, as indicated by a red color-coded scheme marked near the left side edge of the insert. This insert fits between inside and the outside surface of the door panel. It is recommended to set up external fusing.
The Series 90-30 PLC system is contained in either a 5 slot baseplate or a ten slot baseplate. The IC693MDL734 may be installed into any of the I/O slots. The IC693MDL734 has a voltage rating of 125 VDC, six isolated outputs isolated, and a 1mA maximum output current per point when active. All outputs on the IC693MDL734 have 90mA power consumption via 5-volt power supply.
Technical Specifications
| Rated Voltage: | 125 volts DC |
| # of Outputs: | 6 (isolated) |
| Freq: | n/a |
| Output Load: | 1.0 Amps per point |
| Output Voltage Range: | -10.8 to +150 volts DC |
| DC Power: | Yes |
Technical Information
Specifications
|
Rated Voltage |
125 volts DC |
|
Output Voltage Range |
+10.8 to +150 volts DC |
|
Outputs per Module |
6 (isolated) |
|
Isolation |
1500 volts between field side and logic side 500 volts between outputs |
|
Output Current |
1 amp maximum per point |
|
Output Characteristics |
|
|
Inrush Current |
15.89 amps for 10 ms |
|
Output Voltage Drop |
1 volt maximum |
|
Off-state Leakage |
1 mA maximum |
|
On Response Time |
7 ms maximum |
|
Off Response Time |
5 ms maximum |
|
Power Consumption |
90 mA (all outputs on) from 5 volt bus on backplane |
Refer to Appendix B for product standards and general specifications.
Troubleshooting
Troubleshooting IC693MDL734
Troubleshooting information is available on IC693MDL734’s website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC693MDL734
PDF Supply can repair your IC693MDL734 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC693MDL734? Answer: The IC693MDL734 is a 125 volt DC Positive/Negative Logic 1 Amp Output module for the GE Fanuc Series 90-30. This module provides 6 isolated output points. Each point has a separate common output terminal associated with it.
- Question: What is this module designed to have? Answer: The IC693MDL734 is designed to have either positive logic characteristics in that it sources current to the loads from the user common or positive power bus; or negative logic characteristics in that it sinks current from the loads to the user common or negative power bus.
- Question: What is the rated voltage of IC6963MDL734? Answer: 125 volts DC
- Question: What is the output voltage range of IC693MDL734? Answer: -10.8 to +150 volts DC
- Question: What kind of power source does this module require? Answer: Power to operate field devices must come from an external power supply supplied by the user.
- Question: With what are the output characteristics compatible? Answer: They are compatible with motor starters, solenoids, and indicators.
- Question: Into what can the IC693MDL734 be installed? Answer: The IC693MDL734 can be installed in any I/O slot of a 5 or 10 baseplate in a Series 90-30 PLC system.
- Question: What should I do if my IC693MDL734 is not working properly? Answer: If your IC693MDL734 is not correctly working, then your product may need repair.
For more information on the IC693MDL734 DC Positive/Negative Logic Output Module of the GE 90-30 Series, please see the Datasheet Manual.
Common related search terms: BuyDatasheet, Emerson, Manual, Price, Repair, Specification, Troubleshoot, Wiring,
