1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC693MDL731A

★★★★★Rated 4.8/5 Based on 9 ratings.

Rate your purchase of the IC693MDL731

SKU 2175211  UPC 011335477672

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description

The GE Fanuc IC693MDL731 is a 12/24 volt DC Negative Logic 2 Amp Output module. Part of the Series 90-30 Programmable Logic Controller system, this module is equipped with 8 output points. These points share a single power output terminal. As the IC693MDL731 sinks current from the loads to the user common or negative power bus, the module has negative logic characteristics. Its output characteristics enable pairing with certain load devices that the user supplies. For example, it is possible to operate this module with various types of solenoids and motor starters as well as indicators. To do so, these devices need to be hooked up between the module’s output and the positive power bus. The user can then provide an external power supply to operate the devices.

Like many similar units in the 90-30 family, the IC693MDL731 has an LED block. There are 16 indicators, arranged in two separate rows – A1 and B1. Each has 8 LEDs but this module only uses A1 as it only has 8 output points. A blow fuse indicator LED is also present. This glows red whenever any fuse in the module is blown. There are two fuses in the unit, each of them a 5 amp fuse. One protects outputs A1 to A4 while the other fuse protects A5 to A8.  These fuses are connected electrically to a single shared common. The user may install this 2 Amp Output module the baseplate of a Series 90-30 system. There is a blue-colored strip on the end of the insert close to the door of the IC693MDL731. This indicates that the unit is low-voltage. 

Technical Specifications

Rated Voltage: 12/24 volts DC
# of Outputs: 8
Freq: n/a
Output Load: 2.0 Amps per point
Output Voltage Range:   12 to 24 volts DC
DC Power: Yes

 

In Stock! 12/24 Volts dc Output, 2 Amp, Negative Logic (8) IC693M IC693MD IC693MDL
ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: Buy, Datasheet, Emerson, Manual, Price, Repair, Specification, Troubleshoot, Wiring, 

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.