GE / IP FANUC Series 90/30 In Stock
IC693MDL660
SKU 2172426 UPC 04173005114
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC693MDL660 IC693MDL660AIC693MDL660-ABIC693MDL660-BCIC693MDL660-CCIC693MDL660-CAIC693MDL660-LTIC693MDL660-RR
Common misspellings:
- 1C693MDL660
- IC693MD1660
- IC693MDL66o
- IC693MDL660
Technical Specifications for IC693MDL660
| Manufacturer | GE Fanuc |
|---|---|
| Series | Series 90-30 |
| Part Number | IC693MDL660 |
| Product Type | Input Module |
| Number of Inputs | 32 |
| Number of Input Groups | 4 |
| Positive Logic | Supported |
| Negative Logic | Supported |
| Voltage Type | DC |
| Input Voltage | 0 to 30 Volts DC |
Product Description
The IC693MDL660 is a 32-point negative & positive input module manufactured by GE Fanuc in the 90-30 series. It is a 24 VDC module with an input voltage range of 0-30 Volts and comes with 32 input points organized in four groups of eight discrete input points. The logic input module was designed to exhibit either negative or positive characteristics and can operate up to voltages of 30V with an input current of 7.0 mA. There are 32 green LEDs on the input module that give the ON/OFF status of the input points, which are labelled from 1 to 32. When the terminal block is secured in place, the green LED comes on. A red LED comes on when the terminal block is not locked in place.
On the module are blue bands that identify a low voltage module. The IC693MDL660 comes with IC694TBBx32 or IC694TBSx32 connector types, which are sold separately. The terminal block for the module is also ordered separately. For exchange of point status and filter information with the CPU, the IC693MDL660 uses 48 input bits and eight output bits. The IC693MDL660 input module can be installed on any input /output slot in the 90-30 series.
Technical Specifications
| Rated Voltage: | 24 volts DC |
| # of Inputs: | 32 |
| Freq: | n/a |
| Input Current: | 7.0 mA |
| Input Voltage Range: | 0 to -30 volts DC |
| DC Power: | Yes |
The IC693MDL660 input module is designed and manufactured by GE Fanuc. It is a member of the GE Fanuc Series 90-30 product line. The IC693MDL660 input module has 32 input channels that support positive and negative logic. This DC-powered input module has a nominal voltage rating of 24 Volts DC and a current rating of 7 milliamps. The 32 input channels on the IC693MDL660 input module are arranged in 4 separate groups, and each input group contains 8 input points and also 2 commons. This module has isolation between the logic side and the field side and the isolation is rated at 1500 Volts. Its input voltage range is from 0 to 30 Volts DC.
The GE Fanuc Series 90-30 IC693MDL660 32-point input module has a response time of about 50 milliseconds when it is switched on and when it is switched off. It is a low-voltage type of input module and it is identified as a low-voltage input module with a blue label. It can be mounted on a terminal block which is sold separately and it can be installed in any I/O slot that is available in a Series 90-30 chassis when it is installed in a Series 90-30 PLC. The IC693MDL660 32-point input module’s internal power consumption rating is 300 milliamps at a voltage rating of 5 Volts DC. This input module can handle a trigger voltage range of 11.5 Volts to 30 Volts. All 32 inputs are labeled with numbers from 1 to 32 and each input has an LED that illuminates when the corresponding input is turned on.
Technical Information
Specifications
|
Rated Voltage |
24 volts DC |
|
Input Voltage Range |
0 to 30 0volts DC |
|
Inputs per Module |
32 (four isolated groups of 8 inputs) |
|
Isolation, Field to Backplane (optical) |
250 VAC continuous; 1500 VAC for one minute |
|
Isolation, Group to Group |
250VAC continuous; 1500 VAC for one minute |
|
Input Current |
7.0 mA per point (typical) at rated voltage |
|
Board ID |
With Input Filter DIP switch disabled (default): 0x0F With Input Filter DIP switch enabled: 0x1A |
|
Input Characteristics: |
|
|
On–state Voltage |
11.5 to 30 VDC |
|
Off–state Voltage |
0 to 5 VDC |
|
On–state Current |
3.2mA minimum |
|
Off–state Current |
1.1mA maximum |
|
Input Filter Times |
0.5ms, 1.0ms, 2.0ms, 5ms, 10ms, 50ms and 100ms, selectable per module |
|
On response Time |
0.5ms, 1.0ms, 2.0ms, 5.0ms, 10.0ms, 50.0ms & 100.0ms (as per filter setting) |
|
Off response Time |
0.5ms, 1.0ms, 2.0ms, 5.0ms, 10.0ms, 50.0ms & 100.0ms (as per filter setting) |
|
Power Consumption |
300mA (all inputs on) from 5 volt bus on backplane |
|
Diagnostics |
Terminal block presence reported to RX3i CPU |
Troubleshooting
Troubleshooting IC693MDL660
Troubleshooting information is available on IC693MDL660’s website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC693MDL660
PDF Supply can repair your IC693MDL660 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC693MDL660? Answer: The IC693MDL660 is a 24 volt DC Positive/Negative Logic Input module for the GE Fanuc Series 90-30. This module provides 32 discrete input points. The inputs are arranged in 4 isolated groups of 8 and each group has its own common. The IC693MDL660 is made to have either positive logic or negative logic characteristics.
- Question: What is the rated voltage of IC6963MDL660? Answer: 24 volts DC
- Question: What is the input voltage range of IC693MDL660? Answer: 0 to +30 volts DC
- Question: What kind of connections are required for the IC693MDL660 module? Answer: This module requires a terminal block (a IC694TBB032 box style or a IC694TBS032 spring clamp style terminal).
- Question: With what are the input characteristics compatible? Answer: They are compatible with pushbuttons, limit switches, and electronic proximity switches.
- Question: Into what can the IC693MDL660 be installed? Answer: The IC693MDL660 can be installed in any I/O slot of a 5 or 10 baseplate in a Series 90-30 PLC system.
- Question: Why is the outside left edge of the insert color-coded blue? Answer: It means that this is a low-voltage module.
- Question: What should I do if my IC693MDL660 is not working properly? Answer: If your IC693MDL660 is not correctly working, then your product may need repair.
For more information on the IC693MDL660 DC Positive/Negative Logic Input Module of the GE 90-30 Series, please see the Datasheet Manual.
|
Release |
Date |
Comments |
|
IC693MDL660-CC |
Jan 2016 |
Change in fab color. No change in form-fit-functionality. |
|
IC693MDL660-BC |
Mar 2010 |
Revised IPI to show correct configuration of DIP switch. |
|
IC693MDL660-BC |
Nov 2005 |
The module no longer becomes inoperable after a period of many rapidly- repeated power cycles. For RX3i, hot insertions that take longer than 1 second no longer cause a System Configuration Mismatch fault. |
|
IC693MDL660-AB |
May 2005 |
Fault displayed if module firmware is missing or corrupt. |
|
IC693MDL660-A |
Mar 2005 |
Initial Release |
Common related search terms: BuyDatasheet, Emerson, Manual, Price, Repair, Specification, Troubleshoot, Wiring,
