1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC693MDL635-Emerson

★★★★★Rated 4.7/5 Based on 3 ratings.

Rate your purchase of the IC693MDL635

GE Intelligent Platforms / GE Fanuc - Series 90-30 - IC693MDL635

SKU 0  UPC 00

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Product Description

The IC693MDL635 is a 125-volt DC Positive/Negative Logic Input module. This GE Fanuc module is specifically designed for compatibility in the RX3i system and can be installed into any I/O within the system. IC693MDL635 has dual logic characteristics – i.e. positive or negative and has 16 input points in one group with a common power input terminal.  When current flows into an input point, it produces a logic 1 in the status table of the input (%I).  The IC693MDL635 design input characteristics make it suited to and operational with a robust option of input devices, such as electronic proximity switches, pushbuttons and limit switches. Located on the top face the module are two horizontal rows with eight green LEDs.  On the upper row, the LEDs are labeled 1 to 8. The LEDs situated on the bottom row are labeled 9 through 16.  These LEDs communicate the “on” or “off” status of each input point to the user.

This 125-volt DC Positive/Negative Logic Input module has a rated voltage of 125 volts with a DC input voltage range of 0 to +150 volts DC.  Its isolation (field to Backplane, optical, and to frame ground) is 250 VACs continuous; 1500 VAC for one minute.  The input current when operating at the rated voltage is typically 1.97 mA.  IC693MDL635 has input characteristics that feature the on-state voltage of 90 to 150 volts DC while the off-state voltage is 0 to 30 volts DC.  The on-state current has a 1.41 mA minimum and the off-state current has a 0.46 mA maximum.  The and off response time is also typically 8 ms for each.  Power consumption at 5V is 80 mA (when all inputs are on) from a 5-volt bus on the backplane.  Power consumption at 125V is 31.5 mA from user-supplied power when all inputs are on at 125VDC.  To identify the module as a high-voltage module, there are red bands on the label.

For terminal block wiring, the torque must be in the range 9.6 to 11.5 in.-ib (1.08 to 1.30 n-M); the wiring -   copper conductors stranded or solid 90C rated, one 14-22 AWG or two 16-22 AWG.  Either solid or stranded wires, but not combined, are to be used in the same terminal.  Also, no combinations of different wire sizes are to be used in one terminal.

Technical Specifications

Rated Voltage: 125 volts DC
# of Inputs: 16 (1 group)
Freq: N/A
Input Current: 1.97 mA
Input Voltage Range:   0 to +150VDC
Power Consumption:    80 mA from 5V bus, 31.5 mA from user supply

 

Part Number: IC693MDL635 / ic693mdl635
Mfr/Brand Name: GE Automation
Mfr Number: IC693MDL635 / ic693mdl635
Type: 125 volt DC POS/NEG Logic, Input Module, 16 Points

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: Emerson, 

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.