GE / IP FANUC Series 90/30 In Stock
Home » GE Fanuc Emerson » Series 90-30 » IC693MDL330 » You are here: IC693MDL330-Specification
IC693MDL330-Specification
SKU 2176450 UPC 0611384287323
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
Product Description
IC693MDL330 is a 120/240 volt, 2-Amp AC Output Module for the GE Fanuc Series 90-30. The module provides four output points in each of its two isolated groups for a total of eight. The two commons are not compound for this module. This allows each group to perform on completely individual AC-supplied phases. Alternatively, they can all also work using the same supply. Each group also has the protection of a 5-ampere fuse for each common. There is an RC snubber in place for each output to protect against transient electrical noise on the power line.
The output voltage range for this module is 85 to 264 volts AC, 50/60 Hz. The output current is 2 amperes maximum per point. Per group, the maximum is 4 amps at 40 °C (104 °F). The IC693MDL330 provides high-degree inrush current (10x the rated current/ 20 amperes maximum for one cycle), making the outputs suitable for controlling a wide range of inductive and incandescent loads. The minimum load current is 100 mA.
The user must provide AC Power for operating loads connected to outputs. DC is not supported. The IC693MDL330 module has LED indicators at the top, which display the ON/OFF status for each point. There are two horizontal rows with eight green LEDs each, as well as one LED at the center between the two rows. The eight upper LEDs, which are labeled A1 through 8, indicate output status. The red “F” LED indicates a blown fuse, showing ON if this happens. The IC693MDL330 has an insert between the inside and outside surface of the hinged door. When the hinged door is closed, the surface facing the inside of the module displays circuit wiring information, and circuit identification information can be recorded on the external surface. The external left edge of the insert is color-coded red to indicate a high-voltage module. The IC693MDL330 has an ON response time of 1 ms maximum, while the OFF response time is ½ cycle maximum. Its power consumption is of 160 mA (with all outputs on) from 5 voltages bus on backplane.
Technical Specifications
| Rated Voltage: | 120/240 volts AC |
| # of Inputs: | 8 |
| Freq: | 50/60 Hz |
| Output Current: | 2.0 A per point |
| Output Voltage Range: | 85 - 132 volts AC |
| DC Power: | No |
Common related search terms: Buy, Datasheet, Emerson, Manual, Price, Repair, Specification, Troubleshoot, Wiring,
You May Also Need
Your Item was added to your shopping cart!
Free Ground Shipping*
US continental orders placed Monday-Friday before 4:00pm EST! Free Ground delivery available on all orders.
Adding Items to Cart
PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.