GE / IP FANUC Series 90/30 In Stock
IC693MDL241
SKU 2170460 UPC 0265794526727
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC693MDL241 IC693MDL241AIC693MDL241BIC693MDL241CIC693MDL241-CAIC693MDL241DIC693MDL241EIC693MDL241FIC693MDL241GIC693MDL241HIC693MDL241JIC693MDL241-LTIC693MDL241-RR
Common misspellings:
- 1C693MDL241
- IC693MD1241
- IC693MDL2A1
- IC693MDL24l
- IC693MDL241
Product Description
The IC693MDL241 is a 24-volt AC/DC Positive/Negative Input Module in the Series 90-30 manufactured by GE Fanuc. It features one group with 16 input points, all with one common power input terminal. It is designed to have either positive or negative logic characteristics in the DC input mode.
IC693MDL241 is designed to work with AC or DC user-supplied inputs. Input characteristics are suitable for a variety of user-supplied input devices, such as limit switches, push buttons, and electronic proximity switches. This module has an Input Voltage Range from 0 to +30 volts DC or 0 to +30 volts AC, 50/60 Hz, and an input current of 7 mA (typical) at rated voltage. Its on-state voltage is 11.5 to 30 volts AC or DC, while its off-state is 0 to +4 volts AC or DC. It has a 3.2 mA minimum on-state current, and a 1 mA maximum off-state current. Its typical response time is 12 ms while ON and 28 ms when OFF.
Once current goes through an input point, the result is logic 1 in the input status table (%I). The user can supply the power necessary to operate field devices, or the isolated +24 VDC output on the power supply (bottom two power supply terminals) may be used to power DC inputs. IC693MDL241 features LED lights to indicate ON/OFF status for each point at the top of the module. The LED block has two horizontal rows with eight green LEDs in each. The top LED row is identified with LEDs A1 through 8 (indicating points 1 to 8), and the bottom row LEDs are identified B1 through 8 (for points 9 to 16).
IC693MDL241 features an insert that separates the inside and outside surface of its hinged door. When this door is closed, the surface facing the inside of the module shows circuit wiring information, while on the outside surface, circuit identification information can be recorded. The blue color on the external left edge of the insert indicates a low-voltage module. IC693MDL241 module can be installed in any I/O slot of a 5 or 10-slot baseplate in a Series 90-30 PLC system.
Technical Specifications
| Rated Voltage: | 24 volt AC or 24 volt DC |
| # of Inputs: | 16 |
| Freq: | 50/60 Hz |
| Input Current: | 7 mA at rated voltage |
| Isolation: | 1500 volts RMS between field side and logic side |
| DC Power: | Yes |
Technical Information
Rated Voltage 24 volts AC or 24 volts DC
Input Voltage Range 0 to +30 volts DC or 0 to +30 volts AC, 50/60 Hz
Inputs per Module 16 (one group with a single common)
Isolation 1500 volts between field side and logic side
Input Current 7 mA (typical) at rated voltage
Input Characteristics
On-state Voltage 11.5 to 30 volts AC or DC
Off-state Voltage 0 to +4 volts AC or DC
On-state Current 3.2 mA minimum
Off-state Current 1 mA maximum
On response Time 12 ms typical
Off response Time 28 ms typical
Power Consumption: 5V 80 mA (all inputs on) from 5 volt bus on backplane
Power Consumption: 24V 125 mA from the Isolated 24 volt backplane bus or
from user supplied power
Troubleshooting
Troubleshooting IC693MDL241
Troubleshooting information is available on IC693MDL241’s website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC693MDL241
PDF Supply can repair your IC693MDL241 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC693MDL241? Answer: The IC693MDL241 is a 24 volt AC/DC Positive/Negative Input module for the GE Fanuc Series 90-30. It has 16 input points in one group. It is designed to have positive OR negative logic characteristics in the DC input mode.
- Question: With what kind of user-supplied input devices are the input characteristics compatible? Answer: They are compatible with pushbuttons, limit switches, and electronic proximity switches.
- Question: Can the IC693MDL241 be used with a DC power source? Answer: Yes it can. The IC693MDL241 can be used with either an AC power source OR a DC power source.
- Question: Into what kind of baseplate can the IC693MDL241 be installed? Answer: The IC693MDL241 can be installed in any I/O slot of a 5 or 10-slot baseplate in a Series 90-30 PLC system.
- Question: What is the rated voltage of this module? Answer: 24 volts AC or 24 volts DC
- Question: What is the input voltage range? Answer: 0 to +30 volts DC or 0 to +30 volts AC, 50/60 Hz
- Question: What should I do if my module is not working? Answer: If your IC693MDL241 is not working, then your product may be in need of repair.
For more information on the IC693MDL241 AC/DC Positive/Negative Input Module of the GE 90-30 Series, please see the Datasheet Manual.
Common related search terms: BuyDatasheet, Emerson, Manual, Price, Repair, Specification, Troubleshoot, Wiring,
