GE / IP FANUC Series 90/30 In Stock
IC693MDL230
SKU 2171465 UPC 050551623289
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC693MDL230 IC693MDL230AIC693MDL230BIC693MDL230CIC693MDL230-CAIC693MDL230DIC693MDL230-LTIC693MDL230-RR
Common misspellings:
- 1C693MDL230
- IC693MD1230
- IC693MDL23o
- IC693MDL230
Product Description
The GE Fanuc IC693MDL230 is a 120 volt AC Isolated Input module. This product is made to work with the Series 90-30 Programmable Logic Controller system. There is a single common power input terminal on this module, which provides power for all 8 input points. The points are isolated and the input circuits are reactive inputs. As the module has input characteristics, it is widely compatible with many different input devices. For example, users can operate this module with pushbuttons, electronic proximity switches and limit switches to name a few. To operate these devices, power must be supplied to the module by the user. Naturally, this must be AC power as DC power sources will not work with this module.
On the top of the unit there is an LED block. This comprises a single row of eight LED points, which represent the status of the eight input points. The LED indicators will be green during normal operation. If there is a problem, they will be red. The hinged door on the unit has a door card, which can be slipped through the gap when the door is closed. The outside surface of the card may be used to record circuit identification information. The edge of this card has red striping, which denotes that this is a high-voltage module. Users may install this AC isolated input module in any baseplate I/O slot to use it in a Series 90-30 PLC system.
Technical Specifications
| Rated Voltage: | 120 Volt AC |
| # of Inputs: | 8 |
| Freq: | 50/60 Hz |
| Input Current: | 14.5 mA at rated voltage |
| Isolation: | 1500 volts RMS between field side and logic side |
| DC Power: | No |
Technical Information
|
Rated Voltage |
120 volts AC, 50/60 Hz |
|
Input Voltage Range |
0 to 132 volts AC, 50/60 Hz |
|
Inputs per Module |
8 (each input point has a separate common) |
|
Isolation |
1500 volts RMS between field side and logic side |
|
|
500 volts RMS between inputs |
|
Input Current |
14.5 mA (typical) at rated voltage |
|
Input Characteristics: |
|
|
On-state Voltage |
74 to 132 volts AC |
|
Off-state Voltage |
0 to 20 volts AC |
|
On-state Current |
6 mA minimum |
|
Off-state Current |
2.2 mA maximum |
|
On response Time |
30 ms maximum |
|
Off response Time |
45 ms maximum |
|
Power Consumption |
60 mA (all inputs on) from 5 volt bus on backplane |
Troubleshooting
Troubleshooting IC693MDL230
Troubleshooting information is available on IC693MDL230’s website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC693MDL230
PDF Supply can repair your IC693MDL230 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC693MDL230? Answer: The IC693MDL230 is a 120 volt AC Isolated Input module for the GE Fanuc Series 90-30. It has 8 isolated input points, each with a common power input terminal.
- Question: What kind of input circuits are they? Answer: They are reactive inputs.
- Question: With what kind of user-supplied input devices are the input characteristics compatible? Answer: They are compatible with pushbuttons, limit switches, and electronic proximity switches.
- Question: Can the IC693MDL230 be used with a DC power source? Answer: NO it cannot. The IC693MDL230 REQUIRES an AC power source.
- Question: Into what kind of baseplate can the IC693MDL230 be installed? Answer: The IC693MDL230 can be installed in any I/O slot of a 5 or 10-slot baseplate in a Series 90-30 PLC system.
- Question: What is the rated voltage of this module? Answer: 120 volts AC, 50/60 Hz
- Question: What is the input voltage range? Answer: 0 to 132 volts AC, 50/60 Hz
- Question: What should I do if my module is not working? Answer: If your IC693MDL230 is not working, then your product may be in need of repair.
For more information on the IC693MDL230 Isolated Input Module of the GE 90-30 Series, please see the Datasheet Manual.
Common related search terms: BuyDatasheet, Emerson, Manual, Price, Repair, Specification, Troubleshoot, Wiring,
