GE / IP FANUC Series 90/30 In Stock
IC693CPU360
SKU 2171246 UPC 0283593221605
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC693CPU360 IC693CPU360-BAIC693CPU360-BBIC693CPU360-BCIC693CPU360-BDIC693CPU360-BEIC693CPU360-CEIC693CPU360-CFIC693CPU360-CGIC693CPU360-CHIC693CPU360-DHIC693CPU360-DJIC693CPU360-DKIC693CPU360-EKIC693CPU360-ELIC693CPU360-Programming SoftwareIC693CPU360-SoftwareIC693CPU360-CAIC693CPU360-LTIC693CPU360-RR
Common misspellings:
- 1C693CPU360
- IC693CPU36o
- IC693CPU360
Technical Specifications for IC693CPU360
| Manufacturer | GE Fanuc |
|---|---|
| Series | Series 90-30 |
| Part Number | IC693CPU360 |
| Product Type | CPU |
| Microprocessor | 80386EX |
| I/O points | 4096 |
| Voltage Input | 5V DC |
| Current Consumption | 670 mA |
| Register Memory | 9999 words |
| Operating Temperature | 0-60 degrees Celsius |
Product Description
The GE Fanuc IC693CPU360 is a Central Processing Unit (CPU) 360 Module. It has 240 Kbytes of Configurable User Memory. This is a single slot CPU module with 4096 discrete I/O points across 8 racks. The typical scan rate of the CPU 360 module is 0.22 mS per 1K of logic memory. Although the module has no built-in serial ports, it can use the connector on a PLC power supply. This module has both RAM and Flash memory and like other IC693 modules, it is compatible with Firmware v.10.60. This unit is compatible with the Series 90-30 range from GE Fanuc. When using this CPU with entry-level applications with low I/O counts, the CPU is embedded into the backplane. This makes all slots available for input or output usage. Ethernet, various bus modules, and control devices are some of the compatible devices that can operate with this CPU module.
Mid-range CPU models are modular and they are available in various memory sizes. The range also includes models with different performance capabilities and increased functionality such as Programmable Coprocessor module support, overrides and a battery-backed clock. As for the high-performance CPUs, they are based on the latest 386EX processor. This enables fast computation and high throughput. These modules can handle up to 4,096 I/O points and they start at 32K of memory and can be programmed in a number of standard languages. The IC693CPU360 is a high-performance CPU.
Technical Specifications
| Processor Speed : | 25 MHz |
| I/O Points : | 2048 |
| Register Memory : | 240KBytes |
| Floating Point Math: | Yes |
| 32 BIT system | |
| Processor: | 80386EX |
Some of the devices and products that can be used with the GE Fanuc IC693CPU360 CPU module include the Ethernet module, different bus modules, and a variety of control devices. There are mid-range CPU modules which come in different memory sizes. Additionally, there are models that feature different performance capabilities as well as improved functionalities like support for the programmable co-processor modules, battery-backed clocks, and override features. The high-performance CPU modules are based on latest versions of the 386EX processor. This processor helps with fast and efficient computation as well as high throughput. The IC693CPU360 CPU module can tolerate up to 4096 I/O points with 32K words of memory and it supports programming in different programming languages.
Technical Information
CPU360 Catalog Number IC693CPU360
|
CPU Type |
Single slot CPU module |
|
|
Total Baseplates per System |
8 (CPU baseplate + 7 expansion and/or remote) |
|
|
Load Required from Power Supply |
670 milliamps from +5 VDC supply |
|
|
Processor Speed |
25 MegaHertz |
|
|
|
||
|
Processor Type |
80386EX |
|
|
|
||
|
Operating Temperature |
0 to 60 degrees C (32 to 140 degrees F) ambient |
|
|
Typical Scan Rate |
0.22 milliseconds per 1K of logic (boolean contacts) |
|
|
User Program Memory (maximum) |
Starting with firmware Release 9.0, 240K Bytes. Note: Actual size of available user program memory depends on the amounts configured for the %R, %AI, and %AQ configurable word memory types (see below). For firmware prior to Release 9.0, fixed size is 80K bytes. |
|
|
Discrete Input Points - %I |
2,048 |
|
|
Discrete Output Points - %Q |
2,048 |
|
|
Discrete Global Memory - %G |
1,280 bits |
|
|
Internal Coils - %M |
4,096 bits |
|
|
Output (Temporary) Coils - %T |
256 bits |
|
|
System Status References - %S |
128 bits (%S, %SA, %SB, %SC - 32 bits each) |
|
|
Register Memory - %R |
Starting with firmware Release 9.0, configurable in 128 word increments from 128 to 16,384 words with Logicmaster and from 128 to 32,640 words with Control version 2.2. For firmware prior to Release 9.0, fixed size is 9,999 words. |
|
|
Analog Inputs - %AI |
Starting with firmware Release 9.0, configurable in 128 word increments from 128 to 16,384 words with Logicmaster and from 128 to 32,640 words with Control version 2.2. For firmware prior to Release 9.0, fixed size is 9,999 words. |
|
|
Analog Outputs - %AQ |
Starting with firmware Release 9.0, configurable in 128 word increments from 128 to 16,384 words with Logicmaster and from 128 to 32,640 words with Control version 2.2. For firmware prior to Release 9.0, fixed size is 9,999 words. |
|
|
System Registers (for reference table viewing only; cannot be referenced in logic program) |
28 words (%SR) |
|
|
Timers/Counters |
>2,000 |
|
|
Shift Registers |
Yes |
|
|
Built-in Serial Ports |
1 (uses connector on PLC power supply). Supports SNP slave and SNP-X slave protocols. Requires CMM module for SNP/SNP-X master, CCM, or RTU slave protocol support; PCM module for RTU master support. |
|
|
Communications |
LAN - Supports multidrop. Also supports Ethernet, FIP, Profibus, GBC, GCM, and GCM+ option modules. |
|
|
Override |
Yes |
|
|
Battery Backed Clock |
Yes |
|
|
Interrupts |
Yes |
|
|
Type of Memory Storage |
RAM and Flash |
|
|
PCM/CCM Compatibility |
Yes |
|
|
Floating Point Math Support |
Yes, firmware-based in firmware Release 9.0 and later. |
|
Troubleshooting
Troubleshooting IC693CPU360
Troubleshooting information is available on IC693CPU360's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC693CPU360
PDF Supply can repair your IC693CPU360 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC693CPU360? Answer: The IC693CPU360 is a single-slot Central Processing Unit from the GE Fanuc Series 90-30. This unit is the "brains" of the PLC and is where most of the calculations take place.
- Question: What's the first thing you should do when testing your IC693CPU360? Answer: When you attach the IC693CPU360 to a 5 or 10 slot rack and power it up, you should be checking for an OK light.
- Question: What if I do not have an OK light after I have powered it up? Answer: If you don't have an OK light, then you won't be able to follow through with the test. The lack of an OK light indicates, right from the start, there is something wrong with your IC693CPU360.
- Question: What is this initial test showing? Answer: You're basically turning on the configuration and logic in this processor in order to set it to run mode. You want to see that this is a good working processor.
- Question: With what software should I test my IC693CPU360? Answer: You can test your IC693CPU360 with Proficy Machine Edition.
- Question: What will I need to test my IC693CPU360? Answer: All you will need is your IC693CPU360, a 5 or 10 slot rack, and a power supply.
- Question: If I think there is a problem with my processor, what should I do? Answer: You should, first, make sure that when you turn on the memory on/off protection switch, the RUN light comes on and then let the processor run overnight (or even 2-3 days). This is to check that it's able to sustain itself in run mode. (You want to make sure it doesn't fail or fall out of run mode for any reason.) If it does fail or fall out of run mode, then you can try reading the faults or errors through the Proficy Machine Edition software. It may give you enough information to help you fix the problem.
- Question: If I can't figure out how to fix my IC693CPU360, what is my next step? Answer: PDF Supply can repair your IC693CPU360 for you.
For more information on the IC693CPU360 Central Processing Unit of the GE 90-30 Series, please see the Datasheet Manual.
|
Rel. |
Ver. |
Date |
IPI |
Upgrade Kit |
New Features |
Problems Resolved |
|
EL |
10.75 |
9-Oct |
GFK-1512S |
44A747148-G10 |
NA |
See GFK-1512S |
|
EK |
10.74 |
8-May |
GFK-1512R |
44A747148-G09 |
NA |
See GFK-1512R |
|
DK |
10.74 |
8-Jan |
GFK-1512P |
44A747148-G09 |
NA |
Loss/add of module faults with IC693ALG222/223 |
|
DJ |
10.73 |
3-Mar |
GFK-1512N |
44A747148-G08 |
NA |
MOVE_REAL operation |
|
|
||||||
|
Config Not Equal with DSM324 |
||||||
|
|
||||||
|
PID Function Block |
||||||
|
DH |
10.6 |
|
|
|
ATEX Certification |
|
|
CH |
10.6 |
2-Jun |
GFK-1512m |
44A747148-G07 |
NA |
CPU won't handle 11K byte smart module init file |
|
|
||||||
|
Load of large (>32K) DSM zip files fails |
||||||
|
CG |
10.51 |
1-Apr |
GFK-1512k |
44A747148-G06 |
NA |
STOP/FAULTs during Run-Mode Stores |
|
CF |
10.5 |
Sep-00 |
GFK-1512h |
44A747148-G05 |
NA |
Rotate Right and Rotate Left functions do not handle error condition correctly |
|
|
||||||
|
Time of Day Clock at power up may not operate |
||||||
|
|
||||||
|
Error when run-mode storing, loading, or verifying exactly 50 blocks in run mode |
||||||
|
|
||||||
|
Fatal Fault retry does not work correctly for some faults |
||||||
|
CE |
10 |
Feb-00 |
GFK-1512g |
N/A |
Hardware Update to Enhance EMC Performance |
|
|
BE |
10 |
Dec-99 |
GFK-1512f |
44A747148-G04 |
IC693DSM314 support added |
User Flash Write and Erase Failure |
|
|
|
|||||
|
Local Logic Programs with VersaPro 1.10 |
PLC can Automatically go to Run Mode |
|||||
|
|
|
|||||
|
Reboot after Fatal Fault |
Retentive Contact Previous Values Table not being cleared |
|||||
|
|
|
|||||
|
Drum Sequencer function |
|
|||||
|
BD |
9.1 |
Jul-99 |
GFK-1512e |
44A747148-G03 |
NA |
AI & AQ Above Default Values |
|
|
||||||
|
Load File of Size 1528 Bytes |
||||||
|
|
||||||
|
C Program with Code Area Greater Than 64K Bytes |
||||||
|
BC |
9.01 |
Jan-99 |
GFK-1512d |
44A747148-G02 |
Break-free SNP |
SNP Master mode on CPU Ports |
|
|
||||||
|
Online Changes to Reference Tables |
||||||
|
|
||||||
|
360 9.00 Upgrade |
||||||
|
|
||||||
|
Read from Flash |
||||||
|
BB |
9 |
Oct-98 |
GFK-1512c |
44A747148-G01 |
Software Floating Point |
Keyswitch Configured as RUN/STOP Switch |
|
|
|
|||||
|
Sequential Event Recorder |
Storing IC693CMM321 Configuration with Windows PLC Programming Software |
|||||
|
|
|
|||||
|
CPU360 User Memory Increased to 240K bytes |
RET_PBLOCK_LIST |
|||||
|
|
|
|||||
|
|
Service Request #7 |
|||||
|
BA |
8.1 |
May-98 |
GFK-1512b |
|
Hardware Change that Improves Reliability |
|
|
|
||||||
|
Demko Agency approval |
Common related search terms: BatteryBuy, Configuration, Datasheet, Emerson, Firmware, Manual, Price, Repair, Specification, Troubleshoot, Wiring,
