GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

Mon-Fri 8AM-5PM EST

IC693CBL331-Emerson

Rated 4.5/5 Based on 2 ratings.

Rate your purchase of the IC693CBL331

IC693CBL331 Cable Kit | Image

SKU 0  UPC 00

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

The GE Fanuc IC693CBL331 is a faceplate connector with a 24-pin I/O interface used for connecting terminal block. These 24-pin connectors are aligned at a right angle in the front end of the PLC which results in the reduction of clearance space required by this module. This system has identical connectors except for cable length and connector orientation. The IC693CBL331 finds its application in 32-point module as well as in 16-point modules. The 32-point module has dual 24-pin connectors. The IC693CBL331 cable is used in its right end when viewed from its front and interfaces with the input or output circuit groups. The 16-point modules are provided with a TBQC faceplate adaptor where this module is used for circuit connections.

The IC693CBL331 adds additional 2-inch depth, which is compensated by the depth of cabinet in which the PLC is being mounted. Each conductor used in the IC693CBL331 have 1.2 A of current rating. If the field devices are present in the system which requires a current rating of greater than 1.2A, then the TBQC assembly is not prescribed. In those conditions, the terminal board with the specified standard should be used. If the 16-point module of the higher current rating is used with this module, then the conductor with lower current rating must be used at maximum load conditions. These cables must be wired one pin to another pin and cable should be of a 3m length in which the connector aligned at a right angle is at one end, and the stripped leads should be at the other end.

Cable, Left Side, Two - 24 Pin 90 Degree Connectors, 2 Meter
ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: Emerson

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.