GE / IP FANUC Series 90/30 In Stock
IC693BEM330
SKU 2177442 UPC 0559841164278
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC693BEM330 IC693BEM330-DH
Common misspellings:
- 1C693BEM330
- IC6938EM330
- IC693BEM33o
- IC693BEM330
Product Description
IC693BEM330 is a GE 90-30 Series Bus Controller Module that provides an interface for a broad range of discrete analog GE Intelligent Platforms. This CPU module has to be installed in slot 1 of the series baseplates since slot 1 is a unique size and type that will only support a CPU module or special option module such as this. IC693BEM330 is an FIP Remote I/O Scanner Module that is intelligent and easily interfaces with the Series 90-30 I/O modules connected to a FIP bus. This allows for up to 19 I/O accommodated modules through the use of two 10 slot baseplates that can be connected together through an expansion cable of up to 50 feet with up to 128 devices. When used together, the remote I/O scanner and modules serve as an I/O nest and can include most Series 90-30 I/O modules. Any CPU type can communicate effectively as a host on the FIP bus. A module in the host serves as the needed interface between the bus and the host.
The IC693BEM330 remote I/O scanner has several basic functions. These include the ability to control operation of the I/O nest when in the appropriately selected mode and discrete scanning capability. This includes the maintenance of I/O scan timing with mapping of I/O data to the FIP application variables. Another feature is the ability to recognize both system and module faults while reporting them to the FIP network while retaining the network configuration even with loss of power. Additionally, the IC693BEM330 permits for a standalone configuration when using a handheld programmer.
Technical Specifications
| Module Type: | FIP I/O Scanner |
| Number of Slots: | 1 (single slot) |
| Backplane Support: | Universal Backplane |
| I/O Points: | Up to 19 I/O modules |
| Communication Ports: | (2) 9-pin male D connectors |
| LEDs | CD1, TEN1, CD2, TEN2 |
Technical Information
FIP Remote I/O Scanner Specifications
|
ClimaticOperatingConditions |
|
|
AmbientAirTemperature |
0 C to 60 C |
|
RelativeHumidity |
5% to 95% non-condensing |
|
AtmosphericPressure |
80 kPa to 108 kPa |
|
MechanicalOperatingCharacteristics Vibration |
IEC 68–2–6 Fc |
|
Electric EnvironmentalOperatingConditions |
|
|
IEC 801.2 |
8 kV (air). Unused FIP bus connector must be covered by anti-static cap, such |
|
|
as DCC12. |
|
|
4 kV (contact) |
|
IEC 801.3 |
10V / m |
|
IEC 801.4 |
1 kV peak |
|
IEC 801.5 |
2 kV peak (12 ohm) |
|
EN55011(radiation) |
CISPR 11 |
|
Storageand TransportCharacteristics |
|
|
Storage Temperature |
–40 C to 85 C |
|
Relative Humidity |
5% to 95% non-condensing |
|
AtmosphericPressure |
66 kPa to 108 kPa |
|
Vibration |
IEC 68–2–6 Fc |
|
Free Fall |
250mm |
|
DataRate |
1Mbit / sec |
|
Protocol |
FIP / World FIP |
|
Bus Address |
0 to 127 decimal / 0 to 7F hex |
|
Current Required from 5V Bus |
609mA |
Troubleshooting
Troubleshooting IC693BEM330
Troubleshooting information is available on IC693BEM330's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC693BEM330
PDF Supply can repair your IC693BEM330 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC693BEM330? Answer: The IC693BEM330 is a FIP I/O Scanner Module from the GE Fanuc 90-30 Series.
- Question: What does IC693BEM330 do for the 90-30 system? Answer: This module is an intelligent module that interfaces Series 90-30 I/O modules to a FIP bus.
- Question: How many I/O modules does the IC693BEM330 accomodate? Answer: This module accommodates up to 19 I/O modules by using two 10-slot baseplates connected by an expansion cable.
- Question: How may the IC693BEM330 be controlled? Answer: The Series 90-30 Hand-held Programmer, which attaches to the Power Supply next to the Remote I/O Scanner provides a convenient way to perform setup, monitoring and control functions.
- Question: Where must IC693BEM330 be located? Answer: IC693BEM330 can be installed in any available backplane slot except the CPU slot.
- Question: What should I do if my IC693BEM330 is not working properly? Answer: Your IC693BEM330 may need repair.
For more information on the IC693BEM330 FIP I/O Scanner Module of the GE Fanuc 90-30 Series, please see the Datasheet User-Manual.
Common related search terms: Emerson
