GE / IP FANUC Series 90/30 In Stock
IC698PSD300
SKU 2170305 UPC 0146421470395
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC698PSD300 IC698PSD300AIC698PSD300BIC698PSD300CIC698PSD300D
Common misspellings:
- 1C698PSD300
- IC69bPSD300
- IC698PSD3o0
- IC698PSD30o
- IC698PSD300
Product Description
The IC698PSD300 is a Multi-Purpose High Capacity 24 VDC, 300 Watt Power Supply manufactured by GE Fanuc for series RX7i. It provides a maximum output of up to 300 watts, operates from 18 to 30 VDC, and requires forced air cooling.
This power supply module offers a logic level of sequencing signals to the RX7i backplane modules. It also offers protection against overvoltage fault conditions, overcurrent, and overtemperature.
Provision of cool air is facilitated by a powerful tray fan that forces air into the power supply’s engine. This fan is mounted at the bottom of the rack. The IC698PSD300 also has an airflow sensor that detects fan failure or air blockage. If the power supply senses any interruption in air flow, it responds by switching off all outputs and turning on the over temperature LED indicator (RED). The power supply automatically recovers from this condition when the internal temperature decreases to operating levels.
The IC698PSD300 module’s three LEDs work together with the airflow sensor. The green OUTPUT OK indicates that all the three DC output channels are operating within the specified range. It only turns OFF if one of the three DC output channels has failed. The red OVER TEMP LED will alert the user if the critical supply temperature exceeds its limit or if the airflow sensor detects interruption of air flow.
Important warning: Do not insert or remove modules when the power supply or any externally-connected power sources are on. Hazardous voltages could exist resulting in personal injury, module damage, or unexpected operation of the device or process.
Technical Specifications
| Nominal Rated Voltage: | 24 VDC |
| Input Voltage Range: | 18 to 30 VDC |
| Input Power: | 430 W |
| Output Voltages: | + 5 VDC, +12 VDC or -12VDC |
| Module Type: | Power Supply |
| Rack Location: | Slot 0 (Leftmost slot) |
Technical Information
|
Nominal Rated Voltage: |
24 VDC |
|
Input Voltage Range: |
18 to 30 VDC |
|
Input Power: |
430 watts (typical), 550 watts (maximum) |
|
Inrush current (cold start, 24 VDC) |
100 amps maximum |
|
Output Requirements |
|
|
Output Power: |
300 watts maximum (total for all 3 outputs) |
|
Output Voltage: |
+5 VDC: 4.875 to 5.25 volts, 0 to 50 amps +12 VDC: 11.64 to 12.6 volts, 0 to 10 amps –12 VDC: –12.60 to –11.64 volts, 0 to 4 amps |
|
Isolation, input to all outputs |
250 VAC continuous; 1500 VAC for 1 minute |
|
Protective Limits: |
|
|
Overvoltage Limit: |
+5 VDC Output: 5.7 to 6.7 volts |
|
Overcurrent Limit: |
+5 VDC output: 65 A typical |
|
+12 VDC output: 15 A typical |
|
|
–12 VDC output: 6 A typical |
|
|
Ride-through (time allowed for loss of input power without affecting DC outputs) |
15 milliseconds minimum |
|
Holdup Time (time from ACFAIL# system failure signal is activated to when any DC output drops out of specification) |
5 milliseconds minimum |
|
Operating Temperature: |
0°C to 60°C (32°F to 140°F) Fan tray attachment required for full capacity. See “Ordering Information.” |
Troubleshooting
Troubleshooting IC698PSD300
Troubleshooting information is available on IC698PSD300's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC698PSD300
PDF Supply can repair your IC698PSD300 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC698PSD300? Answer: The IC698PSD300 is a Multi-Purpose, 24 VDC, 300 Watt Power Supply from the GE Fanuc RX7i Series.
- Question: From what input voltage source range does IC698PSD300 operate? Answer: This power supply operates from an input voltage source range of 18 to 30 VDC.
- Question: What 3 outputs does this power supply have? Answer:
- +5 VDC @ 50 Amps
- +12 VDC @ 10 Amps
- -12 VDC @ 4 Amp
- Question: What else does the IC698PSD300 provide? Answer: This module provides logic level sequencing signals to modules on the RX7i backplane.
- Question: What type of protection is provided with the IC698PSD300? Answer: This power supply provides protection for overcurrent, overtemperature, and overvoltage fault conditions.
- Question: What is unique about the IC698PSD300? Answer: This module provides up to 300W total power ouput power but requires forced air cooling, provided by a fan tray mounted on the bottom of the rack.
- Question: What do the 3 LEDs indicate? Answer:
- FIELD OK (Green). When this LED is lit, it indicates power is being supplied within its specification range.
- OUTPUT OK (Green). When this LED is lit, it indicates all 3 DC channels are operating within their specifications. Turns OFF if any of the 3 DC output channels has failed.
- OVER TEMP (Red). When this LED is lit, the critical supply temperature is exceeded or if the airflow sensor detects cessation of air flow.
- Question: What should I do if my IC698PSD300 is not working properly? Answer: Your IC698PSD300 may need repair.
For more information on the IC698PSD300 Multi-Purpose, 24 VDC, 300 Watt Power Supply of the GE Fanuc RX7i Series, please see the Datasheet User-Manual.
| Version | Date | Comments |
| PSD300D | Aug. 2010 | Label change only. No change in functionality, performance or compatibility. |
| PSD300C | Aug. 2006 | Power supplies qualified to the Explosive Atmospheres Directive, European Safety for Hazardous Locations, Equipment Group II, Category 3 (ATEX) agency standard. |
| Corrected an infrequently observed issue with power supply shutdown causing corrupted memory faults in CPU. | ||
| PSD300B | Jun. 2005 | Overtemperature detection. See GFK-2315B for details. |
| PSD300A | Feb. 2005 | Initial release. |
Common related search terms: DatasheetEmerson, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
