1-800-360-6802
[email protected]

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-800-360-6802

Mon-Fri 8AM-5PM EST

[email protected]

IC698PSA100

★ ★ ★ ★ ★ Rated 4.8/5 Based on 15 ratings.

Rate your purchase of the IC698PSA100
IC698PSA100 In Stock! RX7i Power Supply 100Watt 85-264VAC IC698PS IC698PS IC698PSA PDFsupply also re

SKU 2171109  UPC 0922839922165

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

New

$2999

1 In Stock

✓  2 Year PDF Supply Warranty

*Need a Specific Revision?

Ships .

Reman

$1941

Save $1,058

18 In Stock

✓  2 Year PDF Supply Warranty

*What is Remanufactured?

Ships .

Repair Service

$1553

Save $1,446

5-10 Days

✓  2 Year PDF Supply Warranty

*What is Fast Repair?

Repair Completion:
5-10 Days

Other Available Revisions for the IC698PSA100 IC698PSA100AIC698PSA100BIC698PSA100CIC698PSA100DIC698PSA100E

Common misspellings:
  • 1C698PSA100
  • IC69bPSA100
  • IC698PSAl00
  • IC698PSA1o0
  • IC698PSA10o
  • IC698PSA100

Product Description

IC698PSA100 is a versatile Power Supply Module manufactured by GE Fanuc for the RX7i series. This PACSystems module delivers +5 VDC, +12 VDC, and -12 VDC power as well as logic level sequencing signals to modules on the backplane. The module plugs straight into slot 0 in the main rack. The IC698PSA100 module’s power supply output can lose up to one AC input line cycle without actually losing output power. Overcurrent, overtemperature, and overvoltage fault conditions are also protected. The module allows 100 watts total output power at ambient temperatures of 0 to 60ºC with no forced air cooling.

 

Output voltages are as follows: +5 VDC output up to 20 amps, +12 VDC output up to 2 amps, and -12 VDC output up to 1 amp. Additional features of the IC698PSA100 module include operation from 85 to 264 VAC or 100 to 150 VDC and power factor correction for AC operation. This module is designed for simple slide-in rack mount construction.  The two-position On/Off switch is situated on the front faceplate. It is a logic level switch that enables or disables the output channels. This switch will not interrupt the AC line input. Please note: Lethal voltages are present inside the module when input power is present. The IC698PSA100 comes equipped with LED indicators to alert the user to both field and output status. These will turn ON when power is applied within the acceptable range and when DC output channels are operating correctly. 

Technical Specifications

Nominal Rated Voltage:    120/240 VAC or 125 VDC
Input Voltage Range: 85 to 264 VAC or 100 to 150 VDC
Input Power: 125 W
Output Voltages: + 5 VDC, +12 VDC or -12VDC
Module Type: Power Supply
Rack Location: Slot 0 (Leftmost slot)

 

Technical Information

Nominal Rated Voltage:

120/240 VAC, 125 VDC

Input Voltage Range:

85 to 264 VAC 47 to 63 Hz, 100-150VDC

Input Power 100 W Supply:

125 watts (typical), 150 watts (maximum)

Input Power 350 W Supply:

437 watts (typical), 500 watts (maximum)

Input Requirements 100W Supply

 

Inrush current (cold start – 115 VAC)

15 amps maximum

Inrush current (cold start – 230 VAC)

30 amps maximum

Inrush current duration

100 milliseconds

Input Requirements 350W Supply

 

Inrush current (cold start – 115 VAC)

30 amps maximum

Inrush current (cold start – 230 VAC)

60 amps maximum

Inrush current duration

100 milliseconds

Power Factor

0.99 min (only valid between 90 VAC and 260 VAC)

Output Requirements (100 W Supply)

 

Output Power:

100 watts maximum (total for all three outputs)

Output Voltage:

+5 VDC: 4.875 to 5.25 volts, 0—20 amps

 

+12 VDC: 11.64 to 12.6 volts,, 0—2 amps

 

–12 VDC: –12.60 to –11.64 volts, 0—1 amps

Overvoltage Limit:

+5 VDC Output: 5.7 to 6.7 volts

Overcurrent Limit:

+5 VDC output: 21 A (typical)

 

+12 VDC output: 2.5 A (typical)

 

–12 VDC output: 3.5 A (typical)

Output Requirements (350 W Supply)

 

Output Power:

350 watts maximum (total for all 3 outputs)

Output Voltage:

+5 VDC: 4.875 to 5.25 volts, 0 to 60 amps

 

+12 VDC: 11.64 to 12.6 volts, 0 to 12 amps

 

–12 VDC: –12.6 to –11.64 volts, 0 to 4 amps

Overvoltage Limit:

+5 VDC Output: 5.7 to 6.7 volts

Overcurrent Limit:

+5 VDC output: 66A (typical)

+12 VDC output: 15A (typical)

–12 VDC output: 4.6A (typical)

Isolation, input to all outputs

250 VAC continuous; 1500 VAC for 1 minute

Protective Limits:

Ride-through (time allowed for loss of AC input without affecting DC outputs)

Holdup Time (time from ACFAIL# system failure signal is activated to when any DC output drops out of specification)

 

15 milliseconds minimum

 

5 milliseconds minimum

Operating Temperature:

100W Supply 350W Supply

 

0°C to 60°C (32° to 140°F)

0°C to 60°C (32°F to 140°F) Fan tray attachment required for full capacity. See “Ordering Information.”

Troubleshooting

Troubleshooting IC698PSA100

Troubleshooting information is available on IC698PSA100's website page; it also includes a datasheet user-manual and a wiring diagram.

Repair your IC698PSA100

PDF Supply can repair your IC698PSA100 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.

 

 

Customer Questions and Answers

  • Question:  What is an IC698PSA100?  Answer:  The IC698PSA100 is a Multi-Purpose, 120/240 VAC or 125 VDC, 100 Watt Power Supply from the GE Fanuc RX7i Series.
  • Question:   From what input voltage source range does IC698PSA100 operate?  Answer:  This power supply operates from an input voltage source range of 85 to 264 VAC or 100 VDC to 150 VDC.
  • Question:   What 3 outputs does this power supply have?  Answer:
    • +5 VDC @ 20 Amps
    • +12 VDC @ 2 Amps
    • -12 VDC @ 1 Amp
  • Question:   What else does the IC698PSA100 provide?  Answer:  This module provides logic level sequencing signals to modules on the RX7i backplane.
  • Question:   What type of protection is provided with the IC698PSA100?  Answer:  This power supply output can ride through the loss of up to one AC input cycle without loss of output power.  Protection is provided for overcurrent, overtemperature, and overvoltage fault conditions.
  • Question:  What do the 2 LEDs indicate?  Answer:
    • FIELD OK (Green). When this LED is green, it indicates power is being supplied within its specification range.
    • OUTPUT OK (Green). When this LED is lit, it indicates all 3 DC channels are operating within their specifications.  Turns OFF if any of the 3 DC output  channels has failed.
  • Question:  What should I do if my IC698PSA100 is not working properly?  Answer:  Your IC698PSA100 may need repair.

For more information on the IC698PSA100 Multi-Purpose, 120/240 VAC or 125 VDC, 100 Watt Power Supply of the GE Fanuc RX7i Series, please see the Datasheet User-Manual.

 

Version Date Comments
PSA100E/PSA350E Aug. 2010 Label change only. No change in functionality, performance or compatibility.
PSA100D/PSA350D Aug. 2006 Power supplies qualified to the Explosive Atmospheres Directive, European Safety for Hazardous Locations, Equipment Group II, Category 3 (ATEX) agency standard.
    Corrected an infrequently observed issue with power supply shutdown causing corrupted memory faults in CPU.
PSA100C/PSA350C Jun. 2005 Overtemperature detection. See GFK-2237C for details.
PSA100B/PSA350B May. 2004 See GFK-2237B for details.
PSA100A/PSA350A May. 2003 Initial release.

PDFsupply Tech

The IC698PSA100 is part of the RX7i series and the power supply output can lose one AC input line cycle without losing power. The input power is 125W which is less than the input power of IC698PSA350 which is 437W.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: DatasheetEmerson, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring, 

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.