GE / IP FANUC Series 90/30 In Stock
IC698CRE030
SKU 2177344 UPC 0692595701662
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.
PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.
Other Available Revisions for the IC698CRE030 IC698CRE030-AAIC698CRE030-ABIC698CRE030-BBIC698CRE030-CBIC698CRE030-CCIC698CRE030-DCIC698CRE030-DDIC698CRE030-DEIC698CRE030-EEIC698CRE030-EFIC698CRE030-EGIC698CRE030-EHIC698CRE030-FKIC698CRE030-FLIC698CRE030-FMIC698CRE030-GMIC698CRE030-HNIC698CRE030-Programming Software
Common misspellings:
- 1C698CRE030
- IC69bCRE030
- IC698CREo30
- IC698CRE03o
- IC698CRE030
Product Description
The IC698CRE030 is a PACSystems RX7i Central Processing Unit. The RX7i CPU is programmed and configured by programming software to perform control of machines, processes, and systems in real time. It is able to communicate with I/O and smart option modules over a rack-mounted backplane using the VME64 Standard format. An embedded Ethernet port or serial port enables the CPU to communicate with the programmer and HMI devices. This particular model utilizes a 600MHz Pentium-M microprocessor (64 MB both user memory and flash).
Highlights of this unit include HSB or hot standby redundancy, battery-backed user memory and non-volatile flash memory allowing for program, configuration, register data, and symbolic variable storage. It is bulk memory accessible via reference table %W. It features programming in Ladder Diagram, C, Structured Text, and Function Block Diagram. Auto-located Symbolic Variables conveniently use unlimited memory. A number of modules are supported, including 90-70 Series discrete and analog I/O as well as VME modules. Please see the installation module for a list of other supported modules.
The IC698CRE030 CPU allows both data monitoring across the web and a maximum of 16 web server/FTP connections. Block size may not exceed 128KB, but 512 program blocks are supported. Furthermore, the unit is equipped with word referencing, a battery-backed calendar clock, serial port enabled firmware upgrades, and three isolated serial ports.
EGD data exchange, TCP/IP communication services, station management, diagnostic tools, and time synchronization to the timeserver are all made possible by an embedded Ethernet interface. Additionally, a redundant IP (configurable by the user) facilitates EGD exchange production.
Power requirements for the IC698CRE030 are as follows: +5 VDC: 3.2 Amps nominal, +12 VDC: 0.003 Amps nominal, and -12 VDC: 0.003 Amps nominal.
Technical Specifications
| Processing Speed: | 600 MHz |
| CPU Memory: | 64 Mbytes |
| Floating Point: | Yes |
| Serial Ports: | 3 |
| Serial Protocols: | Modbus RTU Slave, SNP, Serial I/O |
| Embedded Comms: | RS-232, RS-486. Ethernet interface |
Technical Information
|
Battery: Memory retention |
For battery selection, installation and estimated life, refer to the PACSystems Controller Battery and Energy Pack Manual, GFK-2741. |
|
Program storage |
Up to 64 Mbytes of battery-backed RAM 64 Mbytes of non-volatile flash user memory |
|
Power requirements: CRE030
CRE040 |
+5 VDC: 3.2 Amps nominal +12 VDC: 0.003 Amps nominal -12 VDC: 0.003 Amps nominal +5 VDC: 6.8 Amps nominal +12 VDC: 0.003 Amps nominal -12 VDC: 0.003 Amps nominal |
|
Operating temperature: CRE030
CRE040 |
0 to 50°C (32°F to 122°F) 0 to 60°C (32°F to 140°F) with fan tray 0 to 60°C (32°F to 140°F), fan tray required |
|
Boolean execution speed, typical: CRE030 CRE040 |
0.069ms per 1000 Boolean contacts/coils 0.024ms per 1000 Boolean contacts/coils |
|
Time of Day Clock accuracy |
Maximum drift of ±2 seconds per day |
|
Elapsed Time Clock (internal timing) accuracy |
±0.01% maximum |
|
Embedded communications |
RS-232, RS-485, Ethernet interface |
|
Serial Protocols supported |
Modbus RTU Slave, SNP, Serial I/O |
|
Ethernet Ports |
Embedded auto-sensing 10/100 Mbps half/full duplex Ethernet interface |
|
VME Compatibility |
System designed to support the VME64 standard ANSI/VITA 1 |
|
Program blocks |
Up to 512 program blocks. Maximum size for a block is 128KB. |
|
Memory (For a detailed listing of memory areas, refer to the CPU Reference Manual, GFK-2222.) |
%I and %Q: 32Kbits for discrete %AI and %AQ: configurable up to 32Kwords %W: configurable up to the maximum available user RAM Managed memory (Symbolic and I/O variables combined): configurable up to 10 Mbytes |
|
Ethernet Interface Specifications |
|
|
Web-based data monitoring |
Up to 16 web server and FTP connections (combined) |
|
Ethernet data rate |
10Mb/sec and 100Mb/sec |
|
Physical interface |
10BaseT RJ45 |
|
WinLoader support |
Yes |
|
Number of EGD configuration-based pages |
255 |
|
Time synchronization |
SNTP |
|
Selective consumption of EGD |
Yes |
|
Load EGD configuration from RX7i to programmer |
Yes |
|
Remote Station Manager over UDP |
Yes |
|
Local Station Manager (RS-232) |
Dedicated RS-232 port |
|
Configurable Advanced User Parameters |
Yes |
Troubleshooting
Troubleshooting IC698CRE030
Troubleshooting information is available on IC698CRE030's website page; it also includes a datasheet user-manual and a wiring diagram.
Repair your IC698CPE030
PDF Supply can repair your IC698CRE030 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
Customer Questions and Answers
- Question: What is an IC698CRE030? Answer: The IC698CRE030 is a 600 MHz Central Processing Unit with Hot Stand-by Redundancy from the GE Fanuc RX7i Series with an Intel Pentium-M microprocessor.
- Question: What does Hot Standby CPU Redundancy in an IC698CRE030 do? Answer: Hot Standy CPU Redundancy allows a critical application or process to continue operating if a failure occurs in any single component.
- Question: How many CPUs are required? Answer: A Hot Standy system uses two CPUs; and active unit that actively controls the process, and a backuo unit that is synchronized with the active unit and can take over the process if it becomes necessary.
- Question: How does IC698CRE030 communicate with I/O and Intelligent Option modules? Answer: The CPU communicates over a rack-mounted backplane using the VME64 Standard format.
- Question: What else is required wtih the IC698CRE030 to accomplish redundancy? Answer: A Redundacy Memory Xchange module (IC698RMX016) configured as a redundancy link in each unit.
- Question: How can I avoid RAM memory loss? Answer: Routine maintenance procedures should include scheduled replacement of the CPU's IC698ACC701 lithium battery pack. The battery maintains program and data memory and operates the calendar clock when the power is removed.
- Question: If I don't have any light on or the CPU is not functioning correctly - What does that mean? Answer: It means there is something wrong with your processor and it will need repair or maybe even replacement.
For more information on the IC698CRE030 Central Processing Unit of the GE Fanuc RX7i Series, please see the Datasheet User-Manual.
| Catalog Number | Date | CPU | Ethernet Firmware Version |
| Firmware Version | |||
| IC698CRE030-HN/CRE040-HN | May. 2013 | 6.75 | 6.2 |
| IC698CRE030-GM/CRE040-GM | May. 2012 | 6.75 | 6.13 |
| IC698CRE030-FM/CRE040-FM | Mar. 2012 | 6.75 | 6.13 |
| IC698CRE030-FL/CRE040-FL | Feb. 2012 | 6.75 | 6.12 |
| IC698CRE030-FK/CRE040-FK | Nov. 2011 | 6.75 | 6.1 |
| IC698CRE030-FJ/CRE040-FJ | Jul. 2011 | 6.71 | 6.1 |
| IC698CRE030-FH/CRE040-FH | Nov. 2010 | 6.01 | 6 |
| IC698CRE030-EH/CRE040-EH | Mar. 2010 | 6.01 | 6 |
| IC698CRE030-EG/CRE040-EG | Sep. 2009 | 6 | 6 |
| IC698CRE030-EF/CRE040-EF | Dec. 2008 | 5.5 | 5.51 |
| IC698CRE030-EE/CRE040-EE | Oct. 2008 | 5.5 | 5.5 |
| IC698CRE030-DE/CRE040-DE | May. 2008 | 5.5 | 5.5 |
| IC698CRE030-DD/CRE040-DD | Dec. 2007 | 5 | 5.01 |
| IC698CRE030-DC/CRE040-DC | Oct. 2007 | 5 | 5 |
| IC698CRE030-CC/CRE040-CC | Aug. 2007 | 5 | 5 |
| IC698CRE030-CB/CRE040-CB | Jul. 2007 | 4.02 | 4 |
| IC698CRE030-BB/CRE040-BB | Jul. 2007 | 4.02 | 4 |
| IC698CRE030-AB/CRE040-AB | Dec. 2006 | 4.02 | 4 |
| IC698CRE030-AA/CRE040-AA | Oct. 2006 | 4.01 | 4 |
| IC698CRE020-DD | Apr. 2005 | 2.04 | 3 |
PDFsupply Tech
The IC698CRE030 is a Pentium M CePU with a 600MHz processing speed, which is slower than the 1.8GHz processing speed of the IC698CPE040. This CPU has a user flash memory of 64 Mbytes.
Common related search terms: BatteryConfiguration, Datasheet, Emerson, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
